SKYLOONG GK73 Series RGB USB Bluetooth Keyboard Instructions
- June 13, 2024
- SKYLOONG
Table of Contents
SKYLOONG GK73 Series RGB USB Bluetooth Keyboard Instructions
NOTE: Press Fn with the function keys
One of the blue LED is flashing. The keyboard is connecting the BT equipment.
Bluetooth ON/OFF switch Link to USB mode
FN function description
(Double-click FN to light FN’s white LED,FN function is hein, click FN again to escape from holding status).
Backlight settings (Can not modify)
| Key | Function |
|---|---|
| FN+ backspace | Backlight ON/OFF |
| FN+ O | Backlight mode 1-5 (Can modify) |
| FN+P | Backlight mode 6-9 |
| FN + 11 | Light effect pause/play |
| FN++ | Backlight brightness – |
| FN+T | Backlight brightness + |
| FN++ | Backlight Effect Speed- |
| FN+→ | Backlight Effect Speed + |
BT &System settings (BT model only,can not modify)
| Key | Function |
|---|---|
| FN+ Space | Bluetooth ON/OFF switch |
Link to USB mode or the last BT equipment.
FN+Z| Long press: The red&green LED of Z key cap will 1 flash, The #1
Bluetooth equipment can be paired.
Press: The keyboard will connect the $1 BT equipment or disconnect.
FN+X| Long press: The red&green LED of X key cap will flash, The $2 Bluetooth
equipment can be paired.
Press: The keyboard will connect the $2BT equipment or disconnect.
FN+C| Long press: The red&green LED of C key cap will83 flash, The 3
Bluetooth equipment can be paired.
Press: The keyboard will connect the $3BT equipment or disconnect.
Note: If the bluetooth pairing is timed out or failed, please re-pair. If
the Bluetooth pairing is successful on the equipment, but the keyboard can not
work still, please delete the keyboard in the Bluetooth list of the equipment
and pair again.
FN+Tab| Long press for 3 seconds to lock/unlock the keyboard
FN + Win| Clock/Unlock Win key
FNL-Alt| ON/OFF Logo LED&back side LED
FN+L-Ctrl| Keyboard’s sleep time setting, white LED flashing on never sleep,
1:5minutes, 2:10minutes. 9:45minutes to sleep.
FN+function (Standard mode reference settings)
| Key | Function | Key | Function |
|---|---|---|---|
| FN + 1 | F1 | FN + _ | |
| FN + 2 | F2 | FN | • |
| FN + 3 | F3 | FN + | |
| FN + 4 | F4 | FN 4 Shift + | |
| FN + 5 | FS | FN « ; | |
| FN + 6 | F6 | FN + Shift + ; | PI |
| FN + 7 | FT | FN + g | • |
| FN + 8 | F8 | FN + Shift + , | |
| FN + 9 | F9 | FN + • | |
| FN + 10 | F10 | FN + Shift + . |
FN+function (Standard mode reference settings)
| Key | Function | Key | Function |
|---|---|---|---|
| FN +A | Play/Pause | FN + F | Mute |
| FN • S | ****Previous | FN + G | **** Volume— |
| FN + D | ****Next | FN + H | **** Volume+ |
Define mode
| Key | Function |
|---|---|
| Standard mode | Standard mode, all buttons can not be user-defined. User can |
customize your own personality keyboard by the following 4 modes. On-board
mode 1/2/3 is strongly recommended. (Note: In the custom mode, except FN key,
other keys can be redefined key values, some of the FNx function can be also
modified,except the backlight bluetooth and system control. The FN button can
not be moved, but user can define your own FN1/FN2/FN3 at any key on the
keyboard in the custom mode)
FN+ Q Driver mode| FN+Q is the driver mode layer, “Q”lights white LED, some
special function (For example. You may assign a macro of more than 32 bytes to
a key in the driver mode while it’s unavailable in those onboard mode layer)
and backlights can be set in this mode. You must keep the driver running and
the keyboard connect with the driver Press FN+ Q again, back to standard
mode..
FN+ W On board mode 1Layer1/Fn1| FN+W, onboard mode layer 1. “W lights white
LED, no need to run and connect the driver. The keyboard works in the custom
key functions and user can modify the key functions and macro Settings by the
driver and these Settings can be downloaded and saved to the keyboard. The
reference Setting the multifunctional reuse Settings of the space bar, click
for the regular space function, Space other key combination to achieve the
onboard mode layer3 call function. Press FN+ W again, back to the standard
mode.
FN+E On board mode 2 Layer2/Fn2| FNE, onboard mode layer 2. E lights white LED
The reference Setting: keyboard of MAC OS, the “control option.command “key
will be in the original position, user can modify the Settings by the
driver,download and save to the keyboard, no need to run and connect the
driver when use the Mac’s function settings. Press FN+ E again, back to the
standard mode
FN+R On board mode 3Layer3/Fn3| FN+R, onboard mode layer 3, “R” lights white
LED The reference Setting. Some special function keys, or combination keys, or
macro keys, these settings of this mode can be called by the key FN3 in
layer1&layer2, All Settings in this mode can be modified and saved to the
keyboard. Press FN+R again, back to the standard mode.
More function and LED backlight settings, please download or update the driver from the following website: http://www.jikedingzhi.com/downloadlist?driverID=41
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>