tzumi 8288HD ColorStrip LED Light User Guide

8288HD ColorStrip LED Light User Guide

INTRODUCTION & FEATURES

Give your home living room a unique atmospheric twist with the TV LED Strip by aura. Designed with a safe adhesive backing, this colorful backlight can be fixed directly onto the back of your TV or computer screen, enhancing your home theater and easing light-induced fatigue. It fits screens up to 65″ and includes a wireless remote controller, which provides you with the freedom to customize your selection of 16 colors and find the perfect brightness, rhythm, and color scheme. The ColorStrip is also perfect for holidays! It features a button on the remote that lets you cycle through light combinations to match your favorite holidays such as Independence Day, Halloween, and Christmas.
PACKAGE CONTENTS
12 ft. LED Strip
Wireless Remote Control

PRODUCT OVERVIEW & FUNCTIONS

USB Cable (Power Source)

INSTALLATION

NOTE: Please make sure that the back surface of your TV is clean from dust, oils, or fingerprints before attempting to apply your LED Strip. Use an alcohol-based cleaning cloth to wipe the back of your TV.

1. Locate the USB port on the back of your TV. If your TV does not have a USB port, you may use any other USB power source.
2. Make sure that you are satisfied with the covera©earea of the LED Strip prior to peeling off the adhesive tape. Make sure that the USB cable is placed near the USB port and has enough slack a7 to reach safely. The Remote Receiver must also be visible in order to work properly.
3. Peel off the backing of the LED Strip to expose the adhesive.
4. Apply to the cleaned surface of the back of TV. Press down for a couple of seconds to secure.
5. Connect the LED Strip with the USB Cable and insert the cable into the USB port.
6. Once connected, remove the protective plastic strip from remote control to activate the battery.
7. Press the ON button to turn on the LED Strip.
8. Refer to the color combinations settings on the remote to customize your LED Strip.

ASSEMBLY

• Connect the LED Strip with the USB cable.

WIRELESS REMOTE GUIDE

Button 1 and 2 can be used to control the brightness for button 5, change the speed for button 6,7,8,9.

1. Brightness (Up)
2. Brightness (Down)
3. Power OFF
4. Power ON
5. LED Color Buttons -16 colors
6. Flash Transition Effect
7. Strobe Transition Effect
8. Fade Transition Effect
9. Holiday Effect Press once, the light will blink red, blue & white Press again, the light will blink orange, yellow & brown Press again, the light will blink red, white & green Press buttons 1 & 2 to control the transition speed

When Remote Control operation becomes slow, it is time to change the battery. Replace with new cell battery.
Compatible with CR2025 – CR2032 battery types

LED LIGHT STRIP SPECS

IMPORTANT SAFEGUARDS

• Keep LED strip away from flammable objects.

• Always make sure that all parts have been connected properly nto avoid short circuit.

• Check to make sure the voltage of the power source (USB) is 5V.

• Do not connect the LED strip to the power source until all of the installation have been completed.

• To trim the LED strip to a desirable size, cut along any of the dotted lines.

• Always make sure that the Remote Receiver is not covered or blocked.
  This will ensure proper operation using the remote control.

• If this product malfunctions, please do not try to repair it yourself, take it to a qualified electrician.

If you have any other questions or issues with product use and care, please contact tzumi Technical Support at: support@tzumi.com or 1-855-Go- TZUMI.

tzumi™ Inc. Distributed by tzumi Inc. NY, NY 10016. © Copyright 2022 tzumi Inc. All Rights Reserved. Made in China. Other trademarks and trade names are those of their respective owners. Subject to change without prior notice.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>