tzumi 8736 LED Karaoke Microphone User Manual

User Manual
LED Karaoke Microphone
Model: 8736

Accessories:
1 Microphone
1 User Manual
1 Charging Cable
1 Aux cable
Features:
BT/USB/Rainbow LED/AUX/TF Card

Technical Parameters:

• BT Version: V5.0
• Polar Pattern: Omni-Directional
• Output Power3 W
• Speaker40 mm 4 3 W
• Lithium battery800 mAh
• Transmission distance: 10 m
• Frequency Range:100Hz-10KHz
• DC/5V: input DC 5V/0.5A
• Charging time: 2-3 hours
• Stand-by time: 180 hours
• Charging Interface: Micro USB(30 cm length)
• Playtime: 3-4 hours (50% volume)
• Material: ABS Plastic+Aluminum Alloy
• Product size :8 * 25. 5 CM, 267g

Button Operation (subject to the actual product)

1. Charging port-Micro USB;
2. Short press to pause, and long press to change the tone;
3. Microphone volume +/-;
4. “∠”Long press to decrease the volume, short press for the previous song;
5. Short press to change mode(BT/Recording ), long press to change the led light;
6. USB port, plug into USB disk to play music;
7. AUX port, plug into to line in;
8. TF/SD card port, plug into TF/SD card to play music;
9. Remix depth +/-;
10. ” ON/OFF”, Turn on and switch off;
11. “>”Long press to increase the volume, short press for next song;
12. Short press to eliminate original sing.

Charging Instructions

Connect the charging cable to the 5V-1A mobile phone charger for charging. The indicator turns red during charging, and red indicator turns off when fully charged.
Using the Environment & Storage Environment

1. Operating environment
   Temperature: 0-40 Humidity : 0-85% RH

2. Storage Environment
   Temperature: 30-60 Humidity : 0-95% RH

Safety Instructions

1. DO NOT DROP, APPLY EXCESSIVE FORCE TO THE CONTROLS, OR PUT HEAVY OBJECTS ON TOP OF THE BT SPEAKER.
2. DO NOT ATTEMPT TO REPAIR, DISASSEMBLE OR MODIFY THE PRODUCT. There are no user-serviceable parts inside this unit.
3. Close supervision is necessary when any appliance is used by or near children under the age of 7.
4. If you do not use the microphone for long periods of time, be sure to store it in a dry place.
5. Keep the microphone away from any heat source.

FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
RF Exposure Information The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>