Tzumi SOUNDMATES Wireless Earbuds User Manual

Tzumi SOUNDMATES Wireless Earbuds

POWER

TURNING ON YOUR EARBUDS

• METHOD I: Remove your earbuds from the charging case. Both earbuds’ LEDs will flash blue.
• METHOD 2 : If the earbuds are not inside the charging case or turned off, tap the RIGHT or LEFT earbud for 5 seconds until the blue LEDs flicl<er and you hear “Power On”.

TURNING OFF YOUR EARBUDS

• METHOD I : Place your earbuds back into the charging case.
• METHOD 2 :Tap either earbud for a few seconds until you hear “Power OFF”.

BLUETOOTH PAIRING INSTRUCTIONS

• FIRST: Remove both earbuds from the charging case. They will begin auto-pairing with each other.
• SECOND: Keep the earbuds within 3 feet of your smart device [for Bluetooth pairing only.] Enable your device’s Bluetooth function from its Settings menu. Select “Soundmates V2” from the Bluetooth device list to pair the earbuds to your device.
  Once paired, you will hear “Device Connected.”, Your Soundmates are now ready to use!

SINGLE EARBUD USAGE

Each earbud can be used independently.

CALLING/MUSIC

• ANSWER/END CALL
  Tap RIGHT or LEFT earbud 2 times

• REJECTING A CALL
  Tap and hold the Right or Left Earbud
  2 seconds until you hear a prompt sound

• PLAY/PAUSE
  Tap RIGHT or LEFT earbud 2 times

• NEXT SONG
  Tap the RIGHT earbud 3 times

• REWIND/PREVIOUS SONG
  Tap the LEFT earbud 3 times

VOICE ASSISTANT

• Tap and hold the RIGHT or LEFT earbud for
• 2 seconds until you hear a prompt sound to activate the Voice Assistant/Siri function. This function may not work for all devices.

CHARGING SOULMATES
Make sure to fully charge the earbuds prior to the first use. Please note: If you are only using one earbud and the second one is fully charged in the case, be sure to remove it prior to inserting the first one.

CHARGING THE CASE

Plug the standard Micro-USS charging cable into the port on the case and connect the USB head to a power source, such as an AC wall adapter or computer. The LED will flash green while charging. Once fully charged, LED will illuminate solid green.

• When the earbuds are low in power, you will hear “Battery Low”. Place the earbuds into their respective slots in the charging case.
• They will automatically begin to charge. The LEDs will turn solid red while charging. The LED on the bottom of the case will turn White.
• Once fully charged, the LEDs on the earbuds and the case will turn off.

IMPORTANT SAFEGUARDS

• Do not use this unit for anything other than its intended use.
• Keep the unit away from heat sources, direct sunlight, humidity, water, or any other liquid.
• Do not expose the device to extremely high or low temperatures, as it may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
• Do not use this unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Keep this unit out of reach of children
• This unit is not a toy

SPECIFICATIONS

• Bluetooth Technology : Version 5.0
• Battery [ Earbuds]: 45 mAh (x2J; 3.N
• Battery [ Charging Case]: 500 mAh 3.N
• Input Power Supply : DC 5V /0.SA
• Earbuds Charging Time [Est]: approx 1.2 hr
• Charging Case Time [Est]: approx 2 hr
• Music Playbacl < Time: approx 5 hrs
• Frequency: 20-201<Hz

BATTERY DISPOSAL
This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

FCC

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation
Warning : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

SoundMates Distributed by tzumi® Inc. NY, NY, 10016. Copyright 2022 tzumi Inc. All Rights Reserved. Made In China. All other trademarks and trade names are the property of their respective owners. Subject to change without prior notice.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>