Tzumi Wireless Charging Earbuds-User Manual
- June 5, 2024
- Tzumi
Table of Contents
Tzumi Wireless Charging Earbuds
Specifications
- CONNECTIVITY TECHNOLOGY: Bluetooth
- SPECIAL FEATURE: Lightweight
- FORM FACTOR: In Ear
- MODEL NAME: TZUMI WIRELESS CHARGING EARBUDS
- CABLE FEATURE: Without Cable
- PRODUCT DIMENSIONS: 1 x 1 x 1 inches
- ITEM WEIGHT: 3.52 ounces
Introduction
At Tzumi, we monitor how well our customers use the cutting-edge technology we provide as part of our standard #liveawesome. When you have the freedom to just enjoy your hobbies and daily necessities, the small things become valuable. We strive to fit every lifestyle with advances in areas such as smart homes, physical health & wellness, and portable & digital accessories. We’ll keep working to provide you with solutions that are trustworthy, cutting-edge, and, above all, enjoyable. Just got a better life!
HOW TO CHARGE
CHARGING THE CASE
Connect the USB head to a power source, such as an AC wall adapter or computer, then affix the standard Micro-USB charging cable to the port on the case. While charging, the case’s LED indications will stay solidly GREEN. The case is fully charged when the LEDs stop blinking and switch off completely.
HOW TO GET BOTH TZUMI EARBUDS TO WORK
- FIRST – Hold down the multi-function button on both headphones while pressing it repeatedly until you hear a “Power On” prompt. Then you’ll hear the word “Pairing” called out. Two chimes* will sound when both earphones are prepared to pair.
- Secondly, choose “Tzumi Sound Mates” from the Bluetooth display list on your smartphone.
HOW TO CONTROL VOLUME
From the top of your phone, swipe down and select Media output. Devices that are connected will be displayed, along with a volume control button. Simply slide the Soundmates volume bar to the left to lower the volume.
FAQs
How can you tell whether your Tzumi earbuds are fully charged?
The red lights on the earphones turn off when they are fully charged, and
the red light on the case stops flashing and becomes solid red when it is
fully charged.
How long do Tzumi earbuds take to charge?
Charge time: from one to five hours Timing: 2.5 hours PUT CHARGE INTO YOUR
CHARGING STATION Connect the included micro USB charging cable to the charging
station’s base. While charging, the LED light will turn completely red. If
fully charged, it will go out.
My Airpod is blinking red and blue—why?
They are currently in a pairing or discovery mode. This indicates that your
headphones are trying to connect to another Bluetooth device. When in pairing
mode, headphones occasionally make an attempt to connect to another device but
are unsuccessful. They blink red and blue to alert you that there is a problem
while pairing.
Charges for sound mates cases exist?
Place soundmates in the case; the magnetic base will automatically charge
them. While charging, the LED will turn completely red. LED will turn off
after reaching full charge.
How do I make my Tzumi Probuds louder?
Implement the following. Boost the volume: Holding the button down during
the second push, press the multi-function button twice in a row.
Why only one Tzumi Soundmate is functioning?
Before pairing, attempt to reset the Master Earbud. the Master Earbud must
be reset. After the pairing prompt, hold down the button on BOTH earphones
until you hear two chimes.
Why does one of my earbuds only function?
Look over the settings. Depending on the audio settings on your headset, it
might only play in one ear. So, make sure the mono option is off in your audio
properties by checking your audio properties. Make sure the voice levels on
both earbuds are balanced as well.
When only one pair of wireless earphones function, how can you fix them?
Restarting the headset is the first step to solving a Bluetooth earphones
issue. If that still doesn’t fix the issue, try pairing and Bluetooth reset.
If it doesn’t work, check the audio settings on your phone or computer.
Otherwise, we believe your sound is the cause of the issue.
How do Tzumi earbuds turn on?
Remove your earbuds from the charging case using method 1. The LEDs on each
earbuds will flash blue.
- Method 2 is to press and hold the Multifunction buttons for 2 seconds while the blue LEDs flash and you hear “Power ON” if the earphones are not in the charging case or are switched off. pairing and bluetooth. If it doesn’t work, check the audio settings on your phone or computer. Otherwise, we believe your sound is the cause of the issue.
How are two earphones connected to one another?
Android users must go to Bluetooth Settings and pair each Bluetooth speaker
or set of headphones individually. After connecting, click on Advanced
Settings by tapping the three-dot icon on the right. If the “dual audio”
option is not already selected, switch it on. Users should be able to connect
to two devices at once thanks to this.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>