AXAGON CRE-S3 Superspeed USB-A SD/microSD/CF UHS-II Card Reader Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
INSTRUCTIONS
FOR USE
{original) revision 1.0
CRE-S3
SUPERSPEED USB-A SD
/ microSD / CF
CRE-S3 Superspeed USB-A SD/microSD/CF UHS-II Card Reader
UHS-II CARD READER
Instructions installeras. for use ( original )
Turn on computer.
Plug the card reader to the USB port of the computer.
An automatic installation will be performed.
No need to install any external drivers.
The memory card reader is ready to use .
ADAPTER CONNECTION
HOW TOINSERT CARDS
SUPPORTED CARDS
microSDXC
microSDHC
microSD
TransFlash SDXC
SDHC
SD
MMC
RS-MMC
MMC Mobile CF Typel
CARD TO CARD DIRECT COPY
CONNECTION TO DEVICE
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on
the product page in the PRODUCT SUPPORT tab at
www.axagon.eu. Nothing helped? Write to our technical
support: support@axagon.cz.
At the end of its service life, do not throw the product into household
waste; take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer.
**** Before using the product, the user is obliged to read the user
instructions. The manufacturer disclaims any liability for damage that may
occur due to improper use of the product or failure to follow the instructions
contained herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
TECHNICAL SPECIFICATIONS
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) » USB 2.0
5000 + 480 – 12 + 1.5 Mbit/s (Super « High + Full – Low Speed)
USB Type A male connector
OUTPUT INTERFACE
3-slot USB 3.2 Gen 1 card reader
S D v1.0 – v1.1 + v2.0 – v3.0 + S D 4.0 (UHS-II)
SDHC <32GB + SDXC <2TB
MMC v3.x « v4.0 « v4.1 « v4.2 © v4.3 « v4.4 v4.5 © v5.0
CF 6.0 (UDMA 0 – UDMA 7) <128PB
3 LUN ( 3 icons) – card to card direct copy
OTHER FEATURES
Plug & Play » Hot Plug – Hot Swap
AUTOMATIC INSTALLATION
power through USB bus
LED INDICATION
t he LED indicates card insertion (permanent light ) and data transfer (
blinking )
O S SUPPORTED
Windows « mac0S – Linux » Chrome 0S + Android
PRODUCT SUPPORT LIM’
http://axagon.eu/produkty/cre-s3#supportLinkGoal
© 2022 AXAGON
Vyrobce / Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice. Made in CHINA for
Axagon. WWW.axagon.eu 
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>