AXAGON EEM2-GTS, EEM2-GTSA SUPERSPEED USB-C 10 Gbps Thin Screwless Box for NVMe M.2 SSD Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
EEM2-GTS, EEM2-GTSA SUPERSPEED USB-C 10
Gbps Thin Screwless Box for NVMe M.2 SSD
Instruction Manual
EEM2-GTS, EEM2-GTSA SUPERSPEED USB-C 10 Gbps Thin Screwless Box for NVMe
M.2 SSD
http://axagon.eu/produkty/eem2-gts#supportLinkGoalhttp://axagon.eu/produkty/eem2-gtsa#supportLinkGoal
Mount disk to the box. (fig 14 at next page)
Turn on computer.
Plug the box to thelJSB port of the computer.
An automatic installation will be performed.
No need to install any external drivers.
The external disk is ready to use.
In the Device manager, please check the successful installation. fig A)
In the Disc manager, please initialize the new disk and format it. fig B
SuperSpeed US8 10Gbps external enclosure for NVMe M.2 SSD
FIGURE A
CHECK CORRECT INSTALLATION IN DEVICE MANAGER
Only devices which are added to the Device Manaaer when
installing the case and the hard drive are displayed
FIGURE B
NITIALIZE THE NEW DISK AND FORMAT IT IN DISK MANAGEMENT SAFE
DISCONNETION OF EXTERNAL BOX The safest method for removing from he computer
is the utilization of Safely Remove Hardware function in Windows operation
system.
OPEN THE BOX
INSERTTHE NVMe M.2 SSD DISK
A USE conductive pad 
B insert the NVMe M.2SSD
DISK
FIX THE NVMe M.2 SSD DISK
CLOSE THE BOX
TECHNICAL SPECIFICATIONS
NPUT INTERFACE
USB-C
USB 3.2 Gen 2 • USB 3.2 Gen 1 (USB 3.0) • USB 2.0
10.000 • 5000 • 480 Mbit/s (SuperSpeed-+ • Superlpeed • High Speed)
USB Type C female connector
SUPPORTED DEVICES
NVMe (PG-Express) M.2 SSD single or double sided disks, no disk capacity
limitation M.2 disk dimension support: 2230, 2242, 2260, 2280 mm M-KEY AND
B+M-KEY M.2 SID drsks supported NGFF 75-pin M-key slot for NVMe M.2 disks
POWER SUPPLY
USB bus power
power supply via USB 3.0 is fully sufficrent rn all cases.
LED INDICATION
Decent blue LED indicates US8 connection and data transfer
OS SUPPORTED
MS Windows 7/8.1/10/11 and later
Windows Server 2008 / 2012 / 2016 / 2019 and later
32-and 64-bit version supported
Mac OS X 10.x and later
Linux 2.6.x and later
Android (OS and device support needed)
Note: drivers are usually part of OS; when Windows 7 used rt is necessary
to check 0S support and driver availability with the M.2 5SD manufacturer.
OTHER FEATURES
Plug and Play & Hot Plug
UASP·TRIM • 5SD boot support
The total bandwidth / transmission rate of the box is determined by the [SB
3.2 Gen 2 interface used (theoretically up to 10 Gbit/s).
The real bandwidth / transmission rate of the box is about 1000 MB/s (1 68/5)
it is given by the limits of the US8 3.2 Gen 2 interface.
Compliant with PCI Express Base Specification Revision 3. 1a specification
Compliant with NVM Express 1.3 specification
Compliant with USB Mass Storage (lass specification
Supports BOT (Bulk-Only Transport)
Sleep mode support — after 5 minutes of inactivity
Aluminum body helps to cool the M.2 5$D.
Higher box surface temperature is not a defect- thanks to the aluminum body,
the heat generated by the disk operation is better drained and transferred to
the environment.
TECHNICAL SUPPORT: More information, FAQs, manuals and drivers can be found on
the product page in the PRODUCT SUPPORT tab at
www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household waste;
take it to a collection point for electrical equipment recycling. For
information about collection and recycling programmes in your country, contact
your local authorities or the retailer who sold you the product.
EU dedaration of conformity: The device complies with the harmonisation
legislation of the European Union 2014/30/EU (EMC) and 2011 /65/EU (RoHS). The
complete EU declaration of conformity is available from the manufacturer
Before using the product, the user is obliged to read the user
instructions. The manufacturer disclaims any liability for damage that may
occur due to improper use of the product or failure to follow the instructions
contained herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
0 2022 AXAGON
Vyrobce / Manufacturer: Real0 s.rt.o.- Zelezn~ 5, 619 00 Brno, Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>