AXAGON ACU-QC19W QC Wall Charger User Guide
- June 9, 2024
- AXAGON
Table of Contents
AXAGON ACU-QC19W QC Wall Charger
SAFETY AND CORRECT HANDLING
- Ensure that the Output parameters of the adapter match the parameters of the powered device.
- Only use good quality and undamaged USB cables.
- Do not cross-connect the charging adapter outputs. Adapter damage may occur!
- Protect the adapter from high temperatures and mechanical damage.
- Use the adapter only in a dry environment.
- Protect it from water, do not use with wet hands, there is a risk of electric shock!
- Do not Cover the adapter and allow access to air for sufficient Cooling.
- The adapter may become hot during use, it is normal. If the adapter is damaged, disconnect it IMMEDIATELY and do not use it again!
- Do not disassemble, modify, o attempt to repair the adapter.
- lfyou do not use the adapter, unplug it.
- The adapter is for indoor use only and the mains voltage is 100- 24OV~.
- Do not leave the adapter unattended.
TECHNICAL SUPPORT
More information, FAQs, manuals, and drivers can be found on the product page
in the
PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped?
Write to our technical support: support@axagon.cz.
- At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programs in your country, Contact your local authorities or the retailer who sold you the product.
- EU declaration of conformity: The device complies with the harmonization legislation of the European Union 2014/35/EU (LVD), 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
- Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than speciñed must be consulted with the manufacturer.
- Do not use the product in humid or explosive environments and near flammable substances.
- Degree of Protection 20. The appliance is protected against contact with a finger; the appliance is not protected against water ingress.
- The appliance of protection class ll according to LEC 60536-appliance with double insulation.
- The appliance is intended for indoor use in standard conditions only.
Wall Charger
INPUT
- AC 100-240V / 50-60 Hz
- 2-pin EURO plug
QCUSB OUTPUT
- USB-A – Female port supports SMART 5V/3BA charging, Quick Charge 3.0:3.6-6.5V/3A, 6.5-9V/2.14, 9-12V/1.6A charging, Standard charging for all devices using 5V and Apple iPhone 5,6, SE, 7 charging.
- Smart 5V/3A charging, Qualcomm Quick Charge 1.0, USB Battery Charging 1.2, Apple 2.4A (Pad) charging.
- QC-fast charging devices supporting Qualcomm Quick Charge 2.0 and Quick Charge 3.0.
- AFC-fast charging devices supporting Samsung Adaptive Fast Charging.
- FCP -fast charging devices supporting Huawei Fast Charge Protocol.
2022 AXAGON
Výrobce / Manufacturer: RealQ s.r.o.-Železná 5, 619 00 Brno, Czech
Republic All rights reserved. All text and pictorial materials contained in
this document are protected by Copyright Act. All marks indicated here are the
registered trademarks of their appropriate owners. Specifications are subject
to change without prior notice. Made in CHINA for Axagon.
USEFUL TIP:
DO YOU WANT A FAST, ROBUST, AND STABLE CHARGING CABLE?
FOR QUALITY AXAGON USB CABLES CHECK:
https://www.axagon.eu/produkty/kabely-a-redukce/usb-pasivni
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/acu-qc19w#supportLinkGoal