AXAGON HMC-6H4A SuperSpeed USB-C Combo 6 in 1 Hub Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
AXAGON HMC-6H4A SuperSpeed USB-C Combo 6 in 1 Hub
Instructions for use
-
Turn on computer.
-
Connect the hub to the PC USB port.
-
An automatic installation will be performed.
No need to install any external drivers. -
The hub is ready.
CONTENTS AND FEATURESS
TECHNICAL SPECIFICATIONS
INPUT INTERFACE: USB-C
- USB 3.2 Gen 1 (USB 3.0) • USB 2.0
- 5000 • 480 • 12 • 1.5 Mbit/s (Super· High· Full, Low Speed)
- USB Type C male connector
OUTPUT INTERFACE: USB-A
- 4 USB 3.2 Gen 1 ports for data with USB Type A female connectors
- up to 2 external disks can be connected at the same time
- up to 0.5 Amp charging on USB ports
HDMI
- HDMI A female connector
- Max.resolution 4K/30Hz (4096 x 2160@30Hz)
- HDCP 1.4 a 2.3 (High-bandwidth Digital Content Protection) support
- TMDS (Transition Minimized Differential Signaling) support
- 8-CH LPCM audio- compress audio (AC-3, DTS) and HBR audio format support
- Up to 192kHz / 24bit- depends on source and target device parameters i.e. notebook/phone and TV /monitor/ AV receiver
- Audio+ Video function requires DisplayPort Alternate Mode (DP Alt Mode) or Thunderbolt 3 compatible port+ OS support
Power Delivery 3.0
- USB Type C female connector
- Notebook/phone charging through the hub
- Max power through the hub 100W (20V/5A)
- requires device with PD power support and matching PD charger
OTHER FEATURES:
- Plug and Play & Hot Plug
- Power Delivery power/ USB bus power
- powered from PD charger or USB-C port
SIZE NET WEIGHT :
- 110 x35 x 13mm &54g
- Cable Length 20 cm
OS SUPPORTED:
- Windows 10/11, macOS, Linux, Android, Chrome OS
- Updated OS required. Automatic driver installation – no driver needed.
Correct PD and DP Alt Mode function depends on OS and device manufacturer support.
TECHNICAL SUPPORT
More information, FAQs, manuals and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization.
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/hmc-6h4a#supportlinkGoal
© 2022 AXAGON Vyrobce / Manufacturer: RealQ s.r.o. – 2elezna 5, 619 00 Brno, Czech Republic All rights reserved. All text and pictorial materials contained in this document are protected by Copyright Act. All marks indicated here are the registered trademarks of their appropriate owners. Specifications are subject to change without prior notice. Made in CHINA for Axagon.