AXAGON PCEU-43RS PCIe Controller Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
AXAGON PCEU-43RS PCIe Controller Instruction Manual
Installation
-
Turn off your computer and unplug the power supply cable.
-
Open the cabinet and insert the card into a free PCI-Express position.
-
Close the case, connect the power and turn on the computer.
-
Windows 11, 10, 8.1, 8:
-
The card is detected and installed automatically.
-
There is no need to install any drivers, they are part of the OS.
Windows 7: -
The card is detected and the Renesas drivers must be installed for the USB 3.0 controller to work properly.
-
Download the latest driver from www.axagon.eu/produkty/ pceu-43rs.
-
When the download is complete, expand the downloaded file and run setup.exe.
-
Follow the on-screen instructions until the installation is completed.
-
-
Check the successful installation in Device Manager (Fig. 1, 2).
FIGURE 1.
Using Device Manager to check whether the installation is correct in Windows 7 (the devices added to the Device Manager during card installation are only displayed) **
FIGURE 2.
Using Device Manager to check whether the installation is correct in Windows
10 (the devices added to the Device Manager during card installation are
only displayed)
**
INFO
To achieve full USB 3.0 speed, you must install the card into the motherboard
with PCI-Express slot compliant with PCIe 2.0 specification.
Technical specifications
INPUT INTERFACE:
- 4x external USB 3.2 Gen 1 ports with USB A-F connectors
- SuperSpeed USB interface – USB 3.2 Gen 1 (alias USB 3.1 Gen 1 / USB 3 0)
- Backward compatible with USB. 2.0 / 1.1
- Supported speeds 5000 / 480 / 12 / 1.5IV b/s (super / high / full / low speed)
OUTPUT INTERFACE:
- PCI-EXPRESS 2.0 x1
- supported 1x / 4x / 8x / 16x slot
- Theoretical speed up to 5Gbps (Bidirectional)
- When PCI-Express 1.0 is used, speed is up to 2500V b/s
OTHER FEATURES:
- xHCI rev. 1.0 specification
- Plug and Play • Hot Plug
- UASP in Windows 8 & later
POWER SUPPLY:
- PCI-Express bus powered
- Optional – powered via 15-pin SATA connector
OS SUPPORTED:
- Windows XP • Vista • 7 • 8 • 8.1 • 10 • 11 & later Server 2008 • 2012 • 2016 • 2019 • 2022 & later 32 & 64bit versions supported
- Linux 2.6.31 & later
DRIVERLESS:
- no driver required for Windows 8 / 8.1 / 10 / 11 and Linux
TECHNICAL SUPPORT
More information, FAQs, manuals and drivers can be found on the product page in the PRODUCT SUPPORT tab at www.axagon.eu. Nothing helped? Write to our technical support: [email protected].
Disposal
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity
EU declaration of conformity: The device complies with the harmonisation legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS). The complete EU declaration of conformity is available from the manufacturer.
Safety Instruction
Before using the product, the user is obliged to read the user instructions.
The manufacturer disclaims any liability for damage that may occur due to
improper use of the product or failure to follow the instructions contained
herein. Product use other than specified must be consulted with the
manufacturer.
Do not use the product in humid or explosive environments and near flammable
substances.
Customer Support & Service
© 2022 AXAGON
Vyrobce Manufacturer: RealQ s.r.o. – Zelezna 5, 619 00 Brno,
Czech Republic
All rights reserved. All text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners.
Specifications are subject to change without prior notice.
Made in CHINA for Axagon.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/pceu-43rs#supportLinkGoal
