AXAGON HUE-P1AL SuperSpeed USB-A Round Hub Instruction Manual
- June 9, 2024
- AXAGON
Table of Contents
AXAGON HUE-P1AL SuperSpeed USB-A Round Hub
Instructions for use
- Turn on computer.
- Connect the hub to the PC USB port.
- An automatic installation will be performed. No need to install any external drivers.
- The hub is ready.
INFO
Any USB charger and a suitable cable with a microUSB connector can be used for external power supply of the hub (recommended charger output current is 2A).
TECHNICAL SPECIFICATION
INPUT INTERFACE
USB 3.2 Gen 1 (USB 3.0) • USB 2.0
5000 • 480 • 12 • 1.S Mbit/s (Super• High• Full • Low Speed)
USB Type A male connector
120 cm FIXED USB CABLE
OUTPUT INTERFACE
4 USB 3.2 Gen 1 ports with USB Type A female connectors
POWER SUPPLY
up to 1.5 Amp CHARGING on USB ports
power through USB bus or
power through optional power adapter (SV/2A min)
OTHER FEATURES
APPLE CHARGING supported
Over Current Protection
up to 3 external disks can be connected at the same time
AUTOMATIC INSTALLATION
Plug & Play • Hot Plug
LED INDICATION
the LED indicates the connection of the hub to the power supply
OS SUPPORTED
WINDOWS XP •Vista• 7 • 8 • 8.1 • 10 & later
Server 2008• 2012 • 2016& later
32 & 64bit versions supported
OS X 1 O.x & later
Linux 2.6.x & later
TECHNICAL SUPPORT
More information, FAQs, manuals and drivers can be found on the product page
in the PRODUCT SUPPORT tab at www.axagon.eu.
Nothing helped? Write to our technical support:
support@axagon.cz.
At the end of its service life, do not throw the product into household waste; take it to a collection point for electrical equipment recycling. For information about collection and recycling programmes in your country, contact your local authorities or the retailer who sold you the product.
EU declaration of conformity: The device complies with the harmonization
legislation of the European Union 2014/30/EU (EMC) and 2011/65/EU (RoHS).
The complete EU declaration of conformity is available from the manufacturer.
Before using the product, the user is obliged to read the user instructions. The manufacturer disclaims any liability for damage that may occur due to improper use of the product or failure to follow the instructions contained herein. Product use other than specified must be consulted with the manufacturer.
Do not use the product in humid or explosive environments and near flammable substances.
PRODUCT SUPPORT LINK
http://axagon.eu/produkty/hue-p1al#supportLinkGoal
© 2021 AXAGON
vyrobce / Manufacturer: RealQ s.r.o. – 2:elezna 5,619 00 Brno, Czech Republic
All rights reserved. AU text and pictorial materials contained in this
document are protected by Copyright Act.
All marks indicated here are the registered trademarks of their appropriate
owners. Specifications are subject to change without prior notice.
Made in CHINA for Axagon.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>