SEGWAY KS0011 KickScooter User Manual
- June 9, 2024
- Segway
Table of Contents
SEGWAY KS0011 KickScooter
Diagram and Functions
Handlebar Functions
| Name | Function | Operation method |
|---|---|---|
| Power Button | Power on/off | Press the Power Button to power on the scooter. |
Press and hold to power it off.
- Available only when the scooter is not in Anti-theft mode.
Wake up the dashboard| Press the Power Button to wake up the dashboard when
the dashboard automatically dims.
Mode Switching Button| Switch between speed modes| Press the Mode Switching
Button twice to switch mode.
Multi-function Button| Turn on/off the cruise mode| Enabling the cruise mode
via the Segway-Ninebot app:
Press the Multi-function Button to turn on the cruise mode, press again to turn it off.
Turn on/off the headlight| Rotate the Multi-function Button
clockwise/counterclockwise to turn off/on the headlight.
Turn on/off the adaptive headlight feature| Rotate the Multi-function Button
clockwise/counterclockwise and hold it for 3 seconds to turn off/on the
adaptive headlight feature. * When the scooter is activated, this feature is
turned on by default.
Confirm the password| Press the Multi-function Button to confirm the password
after entering the password with the Direction Indicator Button successively.
USB Port| Charging| Connect your device to the USB Port for charging.
Throttle| Activate ASSIST mode| Enabling ASSIST mode via the Segway-Ninebot
app:
Press and hold the throttle for 5 seconds to activate ASSIST mode.
- Squeeze brake levers to turn it off.
Speed up| Press and hold the throttle to speed up.
NFC Area| Interact with the NFC card to Power on/off| Tap the NFC card on the
NFC Area to power on/off the scooter.
Interact with the NFC card to unlock| Tap the NFC card on the NFC Area to
unlock the scooter.
Horn Button| Turn on the horn| Press the Horn Button, the scooter will beep.
Direction Indicator Button| Turn on the left/right direction indicator| Press
the left/right side of the Direction Indicator Button, the left/right
direction indicator will flash, and automatically turns off after 5 seconds.
Enter the password| Press the left/right side of the Direction Indicator
Button (left is minus, right is plus) to enter the password. * The password is
set to 1-2-3-4 by default. Change it via the Segway-Ninebot app.
Dashboard
| Symbol | Name | Meaning | Description |
|---|---|---|---|
| **** | POWER Progress Bar | The symbol displays the motor output power of the |
scooter.
****| Speedometer| The symbol displays the current speed of the scooter.
| Cruise Mode|
**** The symbol indicates that the cruise mode is activated.
| Enabling the cruise mode via the Segway-Ninebot app:
1) In ECO, DRIVE or SPORT mode, press the Multi-function Button to activate the cruise mode when the speed ＞ 3.1 mph (5 km/h). Then the scooter will cruise at the current speed.
Note: When the cruise mode is activated, the scooter will beep and the front and rear direction indicators will flash once respectively.
2) Turn off the cruise mode with the following methods: Method 1: Twist the throttle or squeeze brake levers. Method 2: Press the Multi-function Button.
Method 3: Switch the speed mode.
****| Lock| When the icon flashes, it means the scooter enters Anti-theft mode.| When the scooter is powered off after 30 seconds:
If the scooter is moved or touched by someone, it will enter to Anti-theft mode. At this point, the scooter will start beeping and the front and rear direction indicators will flash, and the motor will be locked automatically.
Note: Only available to power on the scooter with NFC card.
**** When the icon lights up, it means the scooter is locked.| When locked via the Segway-Ninebot app or in the unlocking state via password, the scooter will keep beeping and the tail light will flash.
Unlock the scooter with the following methods:
1) Press the Power Button to wake up the dashboard, the dashboard will display the digit “0” by default, then enter the four-digit password 1-2-3-4 with the Direction Indicator Button and confirm the password with the Multi- function Button successively.
Note: Enable/Disable the unlock with password feature via the Segway-Ninebot app and set your own password.
2) Tap the NFC card on the NFC Area.
3) Unlock via the Segway-Ninebot app.
| Symbol | Name | Meaning | Description |
|---|---|---|---|
| Temperature Warning | It indicates that the battery temperature has reached |
60°C (140°F) or is below 0°C (32°F).
| USB Port Icon| When the USB port icon lights up, it means that the
device (not fully charged) is connected to the USB port.
| Bluetooth| It indicates that the scooter is connected to the Segway-
Ninebot app.
| Warning| The symbol indicates that the scooter has detected an error. The
error code will display on the dashboard. Please contact the after-sales
service for repair.
| Remaining battery power| The symbol displays
the remaining battery power in battery bar.
| Adaptive Headlight| When the icon flashes, it means the Adaptive
headlight feature is turned on.| When this feature is turned on, the headlight
will work automatically to adapt to a variety of situations and conditions and
help illuminate the way.
| SPORT mode| When the icon lights up in red, it means that the fast
speed mode is turned on.
When the icon lights up in white, it means that the fast speed mode is turned
off.
Speed Modes Introduction
| Mode/model | P65U (Speed limit) | **** Switching methods |
|---|---|---|
| **** 3.7 mph (5 km/h) | Enable/Disable WALK mode via the Segway-Ninebot app. |
Note: The headlight is always on and the tail light will keep flashing in WALK mode.
| **** 3.7 mph (5 km/h)| Enabling ASSIST mode via the Segway-Ninebot app:
Press and hold the throttle for 5 seconds to activate ASSIST mode. Squeeze brake levers to turn it off.
| 0 mph (0 km/h)| The scooter will automatically enter to PARK mode in the following circumstances:
1) Stop riding and the scooter is at a complete stop.
2) The start speed ≤ 1.24 mph (2 km/h).
Note: The start speed is set to 3 km/h by default, only available to change via the Segway-Ninebot app (0–3.1 mph [0–5 km/h]).
Exit PARK mode:
1) Squeeze brake levers.
2) Press and hold the throttle till the speed ≥ 2.49 mph (4 km/h).
| 11.2 mph (18 km/h)| Press the Mode Switching Button twice.
| 24.9 mph (40 km/h)| Press the Mode Switching Button twice.
| 24.9 mph (40 km/h)| Press the Mode Switching Button twice.
30 mph (48 km/h)| 1) Press the Mode Switching Button twice to switch to SPORT
mode.
2) Enable/Disable the fast speed mode via the Segway-Ninebot app.
Note: After activating the scooter, this feature is available only when the riding mileage reaches
3.1 miles (5 km).
DO NOT turn on the fast speed mode in bad weather!
DO NOT use this feature before familiarizing yourself with the scooter!
Specifications
| Item | Parameter |
|---|---|
| **** Product | Name |
| Model | P100SU |
| Length × Width × Height | Approx. 46.6 × 25 × 50.7 in (1184 × 634 × 1287 mm) |
| Folded: Length × Width × Height | Approx. 46.6 × 25 × 25.2 in (1184 × 634 × 640 |
mm)
Net Weight| Approx. 71 lbs (32.2 kg)
Rider| Max. Payload| 265 lbs (120 kg)
Recommended Age| 18–60 years old
Required Height| 5’2”–6’6” (160–200 cm)
Machine| Wheelbase| 35.4 in (900 mm)
Ground Clearance| 6 in (153 mm)
Max. Speed[1]| Approx. 30 mph (48 km/h)
Typical Range[2]| Approx. 62.1 miles (100 km)
Max. Slope| Approx. 23%
Traversable Terrain| Bicycle lanes, parks, campuses and most of the flat road
conditions and typical Belgian roads
Operating Temperature| 14 to 104°F (-10 to 40°C)
Storage Temperature| 14 to 122°F (-10 to 50°C)
IP Rating| IPX5
Duration of Charging| Approx. 7 h
**** Battery| Nominal Voltage| 47.2 V
Max. Charging Voltage| 54.6 V
Nominal Energy| 1086 Wh
Nominal Capacity| 23 Ah
Charging Ambient Temperature| 0–43°C (32–109°F )
Battery Management System| Over-heating, short circuit, over-current, over-
discharge and over-charge protection
Motor| Motor Type| Brushless DC (BLDC) motor
Nominal Power| 0.65 kW, 650 W
Max. Power| 1.35 kW, 1350 W
Charger| Type| Built-in
Input Voltage| 100–240 V~50–60 Hz, 2.0 A MAX.
Max. Output Voltage| 54.6 V
Rated Output| 53.5 V 3 A
| Item| Parameter
---|---|---
Charger| Output Power| 0.1 kW, 160 W
Model| NBW54D603D0D
Tire| Type| 10.5-inch Self-sealing tubeless tires
Tire Pressure| 30–45 psi
Material| Rubber
**** Others| Speed Modes| WALK mode, ASSIST mode, PARK mode, ECO mode, DRIVE
mode and SPORT mode
Suspension System| Front and rear torsion bar suspension
Brake System| Disc brake & Electric brake
- Max. Speed: tested while riding with a full battery, 75 kg (165 lbs) load on pavement.
-
Some of the factors that may affect the maximum speed include the rider’s weight, remaining battery power, wind resistance, etc.
Warning: it is your legal duty to comply with your local traffic law and regulations when using this product. In the Unites States, in certain States, an electric kickscooter is not allowed to be used on public road (i.e., “on- road” ), if its maximum speed capacity, weight and/or other features do not comply with the mandatory requirements imposed by law. With respect to maximum speed capacity restriction, certain States require that an electric kickscooters’ maximum speed capacity shall be capped at / limited to a specific miles per hour if it is for on-road use, and the cap / limit varies in different States. By way of examples, the States that impose such maximum speed capacity restriction include New York, Florida, Arizona, New Jersey etc. In the event you intend to use this product on-road in a State that imposes such maximum speed capacity restriction, you MUST select a proper lower speed mode of this Product to assure that the product’ s maximum speed capacity under such speed mode complies with the law. In the event the maximum speed capacity of the lowest speed mode of this product nevertheless exceeds the maximum speed capacity restriction imposed by a State for on-road use, you shall not use this product on-road in that State. Furthermore, a State may have other law regulating on-road use of this product, such as maximum speed requirement and/or helmet requirement. In addition to State law, there may be further restrictions or prohibition on use of electric kickscooters by local law and/or regulations. For off-road use of this product, there may be other restrictions and/or limitations imposed by the property owner or others. The App of the product may provide additional useful information related to this matter.
Disclaimer: this is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. Segway and Ninebot explicitly hereby disclaim any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. Segway and/or Ninebot reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibitions, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product.- Typical Range: tested while riding with a full battery, 75 kg (165 lbs) load, 25°C (77°F), at the speed of 9.9 mph (16 km/h) on average on pavement.
-
Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc.
Common Failures
| Error code | Possible causes |
|---|---|
| 10 | BLE Bluetooth communication error |
| 11 | Motor 1A phrase current sampling failure |
| 12 | Motor 1B phrase current sampling failure |
| 13 | Motor 1C phrase current sampling failure |
| 14 | Throttle Hall sensor abnormality |
| 15 | Brake Hall sensor abnormality |
| 18 | Hall sensor abnormality |
| 21 | BMS communication error |
| 22 | BMS password error |
| 23 | BMS default serial number |
| 24 | System voltage detection abnormality |
| 26 | Flash storage error |
| 27 | Control board password error |
| 28 | Motor MOS driver upper bridge short circuit |
| 29 | Motor MOS driver lower bridge error |
| 31 | Program skip error |
| 35 | Vehicle default serial number |
| 39 | Battery temperature sensor error |
| 41 | Turn signal abnormality |
| 42 | Headlight abnormality |
| 45 | Abnormal bus current op-amp circuit |
Certifications
This product is certified to ANSI/CAN/UL-2272.
The battery complies with UN/DOT 38.3.
The battery complies with ANSI/CAN/UL-2271.
Federal Communications Commission (FCC) Compliance Statement for USA
This device complies with part 15 of the FCC rules. Operation is subject to
two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Industry Canada (IC) Compliance Statement for Canada
This device complies with Industry Canada license-exempt RSS standard (s).
Operation is subject to two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device. CAN ICES-3
(B)/NMB-3(B)
Trademark
Segway and the Rider Design are the trademarks of Segway Inc.; Android is the
trademark of Google Inc., App Store is a service mark of Apple Inc. The
respective owners reserve the rights of their trademarks and copyrights, etc.
referred to in this manual.
We have attempted to include descriptions and instructions for all the
functions of the KickScooter at the time of printing. However, due to constant
improvement of product features and changes of design, your KickScooter may
differ slightly from the one shown in this document. Visit the Apple app Store
(iOS) or the Google Play Store (Android) to download and install the Segway-
Ninebot App. Please note that there are multiple Segway and Ninebot models
with different functions, and some of the functions mentioned herein may not
be applicable to your unit. The manufacturer reserves the right to change the
design and functionality of the KickScooter product and documentation without
prior notice.
© 2022 Ninebot (Beijing) Tech Co. Ltd. All rights reserved.
(※The Segway-Ninebot App can support KickScooter with built-in Bluetooth)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>