NETRAUTA ST-3.5G Ozone Generator User Guide

June 10, 2024
NETRAUTA

NETRAUTA ST-3.5G Ozone Generator

NETRAUTA ST-3.5G Ozone Generator

Technologically Advanced

Because You Care, Breathe Clean Air

Please read all of the information provided in this user guide before operating your new ozone generator

WARNING

This air unit is not a medical device. Do not stop or alter any medical therapy programs or medications without the the advice of your physcian. Excessive ozone concentrations may cause mucous membran or respiratory irritation.

Symbol|

CAUTION

| Symbol
---|---|---
RISK OF ELECTRICAL SHOCK DO NOT OPEN

ATTENTION

Symbol This “exclamation point” calls attention to a feature for which you should read the enclosed literature carefully to prevent operating and maintenance problems.

Symbol This “bolt of lightning” indicates that insulated material within your unit may cause an electrical shock. For the safety of everyone, do not remove product covering.

Caution: This unit is not intended for use by people (including children) with reduced physical sensory or mental capacity, unless they are supervised or have been given clear instructions, which they are competent to understand and follow, concerning the use of the unit by people directly responsible for their safety. Children should be supervised to ensure they do not play with the unit. Please make sure no people and animals in the room when operating this unit.

Q. What is an ozone alert?

A.Ozone alerts in cities are a result of the high pollution levels of hydrocarbons produced by the burning of fossil fuels. When ultraviolet rays from the sun strike hydrocarbons, O3 is one of the by-products Ozone or activated oxygen is Nature’s sanitizer and is produced by Nature to combat air pollution. The more polluted the city is, the more ozone will be in the air.

Q. Is ozone safe?

A.YES! But moderation is the key. Ozone in very high concentrations is not necessary and can even be somewhat irritating. We recommend you set the O3 dial properly.

Q. Where should I place the ozone generator in my home or office?

A.The ozone generator should be placed in the central location of your home, preferably a big open area, such as a living or dining room. It is not designed for a single room use, however, if there is a particular room/area that needs to be sanitized, you can place the ozone generator there first for a few days until the problem has been corrected, and then return it to recommended location Place the unit at least 4 feet off the ground or higher for better performance.

Q. How long will the ozone generator last?

A.This ozone generator is made of high-quality materials with most scientific design. Because of the qualified materials and superior craftsmanship that go into each ozone generator, you will enjoy it for many years if it is maintained properly.

Q. Is it difficult to install?

A.No.Just plug it in and set the time from the timer you need the unit to work. For even quicker results, you can also consider placing the unit high up facing an air intake if your home features an air conditioning/heating system. O3 will then be evenly distributed.

COMMONLY ASKED QUESTIONS

Q. What does the ozone generator do?

A.It treats the air in your home or office by breaking down odor causing pollutants, killing viruses, bacteria, mold & mildew, and removing airborne contaminants (smoke, dust, pet dander, pollen) from your breathing space.

Q. How does the ozone generator work?

  1. Before using this unit, please make sure there is no people or animal in the room;
  2. Plug the unit, the indicator light will be on;
  3. Turn the timer clockwisely and choose the time from 5 minutes to 120 minutes as you wish;
  4. If you do not want the timer, please use the HOLD function to let the unit work continuously;
  5. After the unit cleans the room, please open the door and window for the air ventilation before

Q. How does nature produce ozone?

A. Ozone is found everywhere outdoors. It is naturally created every day during sunshine, lightning and other natural events.The fresh sweet smell after a thunderstorm is abundance of ozone the air, rain, waterfalls and waves of the ocean.

WHERE TO USE?

  • Homes & Living Areas
  • All types of offices & stores
  • Water & fire damaged areas
  • New paint & wallpaper areas
  • Odor clean-up
  • “Sick” buildings
  • Hospitals & nursing homes
  • Veterinary offices
  • High pollen environments
  • New carpet furniture & Rooms
  • Kitchens
  • Attics & basements
  • Laundry rooms
  • Doctors’ offices
  • Smoking areas
  • Hotel rooms
  • High pollen environments
  • New carpet furniture & Rooms
  • Kitchens
  • Attics & basements
  • Attics & basements
  • Doctors’ offices
  • Day care centers
  • Stables & aviaries
  • Locker rooms
  • Restaurants & bars

Understanding the ozone generator

Model: ST-3.5G, ST-5G

Understanding the ozone generator

Model: ST-7G, ST-10G

Understanding the ozone generator

There is an aluminum air-cooling fin between the ozone plate and the bracket clip.
Steps to replace the ozone plate:


  1. Unplug the unit;
  2. Lift plate holder top upward a little until it does not clutch the plate;
  3. Push the holder top backward a little until you can take out the plate;
  4. Take out the old plate slowly and gently;
  5. .Install the new plate also slowly and gently, and clutch the plate again with the plate holder top

Leading Source of Unique Indoor Ozone Generator Technology!

Congratulations on your purchase. You have obtained a state-of-the-art ozone generator system and a high quality laminated surface.
Only the finest materials surround this finest ozone generator technology.
We hope you will enjoy your purchase for years to come.

Read ALL instructions carefully before using this product!

FOR YOUR RECORDS

Please record the model and serial number below, for easy reference, in case of loss. These numbers are located on the back panel of your air purification unit. Space is also provided for other relevant information.

Model number
Serial Number
WHERE TO USE?
Date of Purchase
Purchased From

Operation and Maintenance

Operation:

  1. Plug the unit

  2. Turn the timer and select the time you need the unit to work, when you set the timer less than 20 minutes, you should turn it past 20 minutes, then turn it back to the minutes you want

  3. The unit sarts working and the indicator light is on:

  4. The unit will be off automatically when it runs out its time and indicator light will be off.

Maintenance:

When the unit produces less and less ozone or no longer produces any ozone, the old ozone plate needs to be replaced. Normally, the ozone plate needs to be replaced after working for 8000 hours.

Specifications

Model| ST-3.5G, ST-5G
Voltage| 120V/60HZ, 220V-240V/50-60H
Power| 50W for ST-3.5G, 60W for ST-5G
Ozone plate quantity| 1 piece, ozone plate dimension 95 cm
Ozone output| 3.5 G/H for ST-3.5G, 5 G/H for ST-5G
HOLD function| Unit will work continuously
Timer| Timer for 120 minutes
Air flow| Max 80 CFM (2.5M³/Min)
Noise| 35 DB
Air supply| Air source
N.W/G.W| 2 KG/2.5 KG
Product dimension| 204L
171W142H mm
Package dimension| 252L
237W200H mm
Applicable area| 5000 SQ.Ft for ST-3.5G, 6000 SQ.Ft for ST-5G
 |
Specifications
Model| ST-7G, ST-10G
Voltage| 120V/60HZ, 220V-240V/50-60HZ
Power| 100W for ST-7G, 120W for ST-10G
Ozone plate quantity| 2 pieces, ozone plate dimension 9
5 cm
Ozone output| 3.5-7 G/H for ST-7G, 5-10 G/H for ST-10G
HOLD function| Unit will work continuously
Timer| Timer for 120 minutes
Air flow| Max 100 CFM (2.8M³/Min)
Noise| 35 DB
Air supply| Air source
N.W/G.W| 3 KG/3.9 KG
Product dimension| 247L212W190H mm
Package dimension| 322L288W235H mm
Applicable area| 7000 SQ.Ft for ST-7G, 10000 SQ.Ft for ST-10G

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals