GE Lighting 93266 LO LED 250L Star Light Set User Guide
- June 9, 2024
- GE Lighting
Table of Contents
Lighting 93266 LO LED 250L Star Light Set
User Guide
93266 LO LED 250L Star Light Set
LED 250L Star Light Set
IMPORTANT SAFETY INSTRUCTIONS
MODEL:93266 LO
When using electric products, basic precautio s should always be followed
including the following:
READ & FOLLOW ALL SAFETY INSTRUCTIONS
- This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock, it should not be played with or placed where small children can reach it.
- Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
- Do not use this product for other than its intended use.
- This seasonal use product is not intended for permanent use or installation.
- Unplug when leaving the house, when retiring for the night, or if left unattended.
- Do not mount or place near gas or electic heaters, fireplaces, candles of other sirniar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not hang ornaments or other objects from cord, wire, or light string.
- Do not place lighting strinp on carpeting drapes, furniture, or allow it to contact vinyl siding while the power is on.
- Do not perform any main.enance or troubleshoot for bad or broken lamps while the power is on.
- Do not dose doors or windows on the product or extension cords as this may damage the wire insulation.
- Do not cover the product with cloth, paper or any material not part of the product when in use.
- Do not let lamps rest on the supply cord or on any wire.
- Do not use in a bathroom.
- Please plug into a 120V 60Hz electrical outlet.
- Mount the unit at a height greater than 1 foot(0.3m) from the ground surface.
- Read and follow all instructions that are on the product or provided with the product.
SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS
- Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulabon or cords, cracks in the lamp holders or enclosures, loose connections, or exposed copper wire.
- Before storing the product, carefully remove the product from wherever it is placed, including trees, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires.
- When not in use, store neatly in a cool, dry location protected from sunlight.
- When the product is used on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
- If the product is placed on a tree, the tree should be well secured and stable.
- Do not impact or drop the transformer, if enclosure is broken or cracked, discard product.
- The product and power unit shall not be installed within 10 feet of a pool, spa, fountain, or other areas of standing water.
WARNING:
- Do not use where only part of the power unit is protected from rain or water (outlet -SEE OTHER SIDE-CONTINUED FROM OTHER SIDE-boxes where there is only a partial cover shall not be used for outdoor installations). 2. This power unit is intended to be correctly oriented in a vertical or floor mount position.
- If the connector of this lighting string does not properly fit into the connector of the driver, do not modify the product and discard product if the connector is damaged. NOTE: Use ors this GE branded, Class 2 Power Supply, Model TS-8W29V, manufactured by Guang Zhou Ting shen Electric Co,Ltd that was provided with this product. DO NOT use this adapter with any other product.
NOTE: LEDs in this set are non-replaceable. Tampering with this set will void the warranty.
CAUTION
- This lighting string is rated 19.2 Wafts (0.16 Amps), do not overload. GE StayBright® light sets come pre-attached to a plug. For end-to-end connections up to three (3) sets, you will need only one (1) plug. To begin, choose one (1) set as your master set This set would be the only set connected to a plug. Next, unscrew the coaxial connector between the light set on al of the sets you would connect to your master set. Lastly, conned each set of lights end-to-end using the coaxial connections, screwing each connection cap tightly. Note: you may only add two (2) additional sets to your master set for a total of three (3) connected sets.
- To reduce the risk of fire electric shock:
a) Do not install on trees having needles, leaves or branch coverings of metal or materials that look like metal, and
b)Do not mount or support strings in a manner that can cut or damage wire insulation. This device compies with Part 15 of the FCC Rules. Operation is subject to the farming two conditions:
(I) this device may not cause harmful interference, and
(ll) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class Bdipital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wil not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Conned the equipment into an outlet on a drcuff different from that to which
the receiver is connected.
– Consult the dealer or an experienced radiofTV technidan for help.
For questions andior assistance, cal customer service at
1-877-398-7337 or visit us on the web
at www.GEhlidayighting.com
FOR INDOOR AND OUTDOOR USE MADE IN CHINA PRINTED IN CHINA
GV-22 Nicolas Holiday ltd. 246 Spring Hill Road, Unit B, Trumbull CT 06611
@ 2022 Nicolas Holiday Ltd., 9E, No. 37
Guangfu N. Rd Taipei, Taiwan 10560All rights reserved
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>