GE Lighting 00103 Energy Smart Random Sparkle LED 20pc Twinkling Ice Crystal Icicle Set, 100ct User Manual

GE Lighting 00103 Energy Smart Random Sparkle LED 20pc Twinkling Ice

Crystal Icicle Set

IMPORTANT SAFETY INSTRUCTIONS

When using electrical products, basic precautions should always be followed including the following:

1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
2. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If one is not provided, contact a qualified electrician for proper installation.
3. This seasonal use product is not intended for permanent installation or use.
4. Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
5. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
6. Do not let lamps rest on the supply cord or on any wire.
7. Unplug the product when leaving the house, when retiring for the night, or if left unattended.
8. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it.
9. Do not use this product for other than its intended use.
10. Do not hang ornaments or other objects from cord, wire, or light string.
11. Do not close doors or windows on the product or extension cords  as this may damage the wire insulation.
12. Do not cover the product with cloth, paper or any material not part of the product when in use.
13. This product is equipped with push-in type lamps. Do not twist lamps.
14. Read and follow all instructions that are on the product or provided with the product.
15. SAVE THESE INSTRUCTIONS

USE AND CARE INSTRUCTIONS

1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water.
2. If the product is placed on a tree, the tree should be well secured and stable.
3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire.
4. When storing the product, carefully remove the product from wherever it is placed, including tree, branches, or bushes, to avoid any undue strain or stress on the product conductors, connections, and wires
5. When not in use, store neatly in a cool, dry location protected from sunlight.

IMPORTANT INFORMATION ABOUT YOUR LIGHTS

• This light set will continue to operate if an LED is burned out or loose. LEDs which become burned out or loose must be replaced promptly in order to maintain the performance and life expectancy of this set.
• It is important to replace burned out LEDs with those included with this set (3.3 volt, 0.066 watts). If LEDs from another set are used they may burn less brightly.

USER SERVICING INSTRUCTIONS

Replace the lamp.

1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling cord.
2. Pull lamp and plastic base straight out of lamp holder.
3. Replace lamp with only 3.3 Volt, 0.066 Watt, LED type lamp (provided with product).

If the new lamp base does not fit in lampholder, follow the steps below step 3.

1. Remove the base of the burned-out lamp by straightening lamp leads and gently pulling lamp out.
2. Thread leads of new lamp through holes in old base with one lead in each hole.
3. After lamp is fully inserted into base, bend each lead up, like other lamps in the light set so that the leads will touch the contacts inside the lamp holder.

CAUTION:

1. Replace lamps only with 3.3 volt, 0.066 watt spare lamps provided with this product.
2. Risk of fire. This product does not contain lamp shunts, which allow the product to operate if one lamp burns out. Do not replace lamps with other than the spare lamps provided with this product.

FUSE REPLACEMENT INSTRUCTIONS

Risk of fire. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. The most common reason for a fuse to blow is due to overload from too many sets being strung together.

1. Make sure the light set is unplugged.
2. To unplug, grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling the cord.
3. Risk of fire. Replace fuse only with 125 volt, 3 amp fuse (provided with this product).
4. Locate the fuse panel on the plug. Slide the panel open to expose the fuses inside (as shown).
5. Remove fuse carefully. Replace the blown (darkened) fuse with the spare fuse included in this set. Close the panel completely by sliding the fuse access cover closed on top of attachment plug.

For Indoor And Outdoor Use 120 V 60 Hz

Distributed by: Costco Wholesale Corporation P. O. Box 34535 Seattle, WA 98124-1535
USA :1-800-774-2678
www.costco.com
Made in China
For customer service call: 1-866-489-0019
OPERATING HOURS:

• January 3 – November 11:
  Monday to Friday, 10AM-7PM EST,

• November 12 – December 23: Monday to Friday, 8AM-8PM EST, Saturday & Sunday, 10 AM-7PM EST

• December 26 – 29: 10AM-7PM EST

See the complete schedule at www.geholidaylighting.com
Nicolas Holiday Ltd. 246 Spring Hill Rd, Unit B, Trumbull, CT 06611
©2022 Nicolas Holiday Limited., 9F., No. 37, Guangfu N. Rd Taipei, Taiwan 10560.
All rights reserved.
This is not a toy, for decorative use only.

References

• Welcome to Costco Wholesale

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>