SALTO IQ2.0 Ethernet and USB Stick Installation Guide
- June 9, 2024
- SALTO
Table of Contents
SALTO IQ2.0 Ethernet and USB Stick
TOOLS NEEDED
Installation
ETHERNET + CELLULAR MODEL
ETHERNET + WIFI MODEL
ETHERNET + POE MODEL
ETHERNET MODEL
(*)Not included
a. ETHERNET + CELLULAR MODEL
b. ETHERNET + WIFI MODEL
c. ETHERNET + POE MODEL
d ETHERNET MODEL
IQ 2.0 SUPPORT
For installations on metal surfaces
Electrical features
OPERATION CONDITIONS
| Min | Max | Unit |
|---|---|---|
| Temperature | 0 | 40 |
2.4 Ghz RF CHARACTERISTICS
| Frequency Range | 2405-2480 Mhz (ISM band) |
|---|---|
| RF Standard | IEEE 802.15.4 |
| Indoor Radio Range | 7m* |
(*) Depending upon installed environment.
POWER SUPPLY CHARACTERISTICS
(To be fed only by an official SALTO Power Supply adapter)
| – | – | Unit |
|---|---|---|
| Input Voltage | 12 | V |
| Max Current | 800 | mA |
OTHER CHARACTERISTICS:
WIFI
IEEE 802.11 b/g/n radio
(*) Depending upon installed environment.
(PoE + WiFi variant might suffer range reduction of up to 30%).
POE
The POE connection complies to IEEE 802.3af (max 15.40W, also known as 802.3a Type 1)
To ensure a correct operation, do
not install the device near a metallic surface.
LED Signals IQ2.0
| LED MODE | LED COLOUR | STATUS INDICATION |
|---|---|---|
| Blink BLUE twice |  | Normal Power Up | |
| Blink long BLUE |  | Software reset | |
| Blink RED GREENBLUE |  | Factory reset | |
| Blink shortBLUE |  | IQ2.0 firmware update | |
| Blink short GREEN (2 minutes) |  | Until BLE connection is |
established
Blink long GREEN| 
| BLE connection is established
Blink shortRED| 
| No connection to the cloud
Blink long PURPLE| 
| Not valid subscription found
Factory Mode
