SALTO WRDx0A4 Series Wall Reader Keypad Entry System Installation Guide
- June 4, 2024
- SALTO
Table of Contents
- SALTO WRDx0A4 Series Wall Reader Keypad Entry System Installation Guide
- Card reader installation guide
- installation
- Electrical characteristics
- Cable type and max. Distances
- Installation example: CU42xx:
- Cable connection
- Installation example CU42xx with RJ45:
- UL Statements
- UL294 performance level:
- Comply with ULC-S319 Class I
- Read More About This Manual & Download PDF:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
SALTO WRDx0A4 Series Wall Reader Keypad Entry System Installation Guide
Card reader installation guide
installation
GANG ELECTRICAL STANDARD BOX
Electrical characteristics
Operation conditions
| Min. | Max. Unit | |
|---|---|---|
| Temperature WRD0B – WRD0S – WRD0BK | -35 |
-31
| +66 °C
+150 °F
Temperature WRD0J – WRD0GK – WRD0JK| -25| +66| °C
-13| +150| °F
Temperature WRD0BF – WRD0JF| -20| +66| °C
-4| +150| °F
Humidity| 35| 85 %
RF characteristics
| Min | Cen. | Max | Unit |
|---|
RFID frequency
Bluetooth Smart 2.4 frequency
| 13.56
2.445
|
2.4835
| Mhz
Ghz
Power Consumption Note 1
| Min | Max | Unit |
|---|---|---|
| Reader | 150 | mA |
| Reader+Keyboard | 250 | mA |
| Reader+Keyboard+Fingerprint | 300 | mA |
Note 1: Installer must take this data into account to dimension the CU42xx
power supply.
Readers only for use with the SALTO Control Units.
Note 2: Not use with Scotchlok butt connector UY2 SALTO recommends to use one
cable per wall reader
Cable type and max. Distances
Cable type
|
Reader
| Reader Keypad| Reader
Keypad Fingerpint
---|---|---|---
UTP Cat5e
2 pairs AWG24
| 328ft
100m
| 196ft
60m
| 164ft
50m
UTP Cat5e
4 pairs AWG24 SP224861/SP224895
| 820ft 250m| 492ft 150m| 328ft 100m
Twisted pairs AWG18 Note2| 1312ft
400m
| 918ft
280m
| 756ft
200m
Note: UL tested at 24 AWG at 100m.
Installation example: CU42xx:
Cable connection
| Eng | Esp | Fra | Deu | Ned | Sve |
|---|
B
A
__
| Green
Yellow Black
| Verde
Amarillo Negro
| Vert
Jaune Noir
| Grün
Gelb Schwarz
| Groen
Geel Zwart
| Grön
Gul Svart
+V| Red| Rojo| Rouge| Rot| Rood| Röd
Installation example CU42xx with RJ45:
Minimum distance between readers 20in (50cm).
UL Statements
Tested by UL with Mifare (DESFIRE, ULTRALIGHT C) and HID iCLASS RFID
communication, and with Mobile APP (JustIN Movile version 2.x) through
Bluetooth version 4.2. Minimum Operating System version for Android: 4.3 or
later and for iOS: 10.0 or later. Ameans of verification shall be employed by
the user to enable access to the wireless electronic device such as a PIN or
biometric feature.
The wireless electronic device is not capable of command, control,
programming, or any other system manipulation and it is only to be used in the
same manner as a physical credential. Wiring methods that shall be in
accordance with the National Electrical Code, ANSI/NFPA 70 or CSA C22.1-02 –
Canadian Electrical Code, Part 1, Safety Standard for Electrical
Installations.
UL294 performance level:
| FEATURE | LEVEL |
|---|---|
| Destructive attack | I |
| Line Security | I |
| Endurance | IV |
| Standby power | Per rating of the power supply |
Comply with ULC-S319 Class I
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
