SALTO WRD0M Design XS Reader Instructions
- June 1, 2024
- SALTO
Table of Contents
SALTO WRD0M Design XS Reader
Product Information
Specifications
- Product Commercial Name: Design XS Reader P1619, Design XS Keypad Reader P1620, Modular XS Reader P0506, Panel XS Reader P1825, Mullion XS Reader P1826, NCoder A1928
- Model: WRD0M, WRD0J, WRD0S, WRD0MK, WRD0JK, WRM0B, WRM0M, WRM0J, WRDP0B, WRDP0M, WRDP0J, WRDM0B, WRDM0M, WRDM0J, EC09, EC0B, EC0M, EC0H, EC0J
- Technology: RFID 13.56 MHz Output max. power
- Control Circuit: 0194, 0153, 0130, 0152, 0164, 0182
- Software: Bluetooth LE Module -0136, 0172, 0173
- Compliance: EN Device powered by a power supply classified ES1 and PS1 according to IEC/EN/UL 62368-1 & AS/NZS 62368.1. The distance between this device and the human body must be higher than 20 cm.
Product Usage Instructions
Electrical Warnings
Device must be powered by a compatible power supply as per standards.
Maintain a minimum distance of 20 cm between the device and the human body to
ensure safety.
Mechanical Warnings
Handle the product with care during installation to prevent damage. Avoid
contact with oil, paints, or acids that could harm the unit. For any concerns,
consult an authorized SALTO supplier.
Legal Warnings
FCC Compliance: This device complies with Part 15 of the FCC Rules. Any
modifications not approved may void the user’s authority to operate the
equipment.
ISED Compliance:
Operation is subject to Industry Canada license-exempt RSS standard(s).
Unauthorized modifications may void the user’s authority.
FAQ (Frequently Asked Questions)
-
Q: What should I do if I encounter interference issues?
A: If you experience interference problems, ensure that the device is not placed near sources of interference like other electronic devices. Contact customer support for assistance. -
Q: Can I use the product in high-humidity environments?
A: The product is designed for non-condensation situations. Avoid exposing it to high-humidity areas to prevent damage.
PRODUCTS DESCRIPTION
| PRODUCT | TECHNOLOGY | SOFTWARE |
|---|---|---|
| COMMERCIAL NAME | MODEL | RFID |
13.56 MHz
Output max. power
| BLUETOOTH LE 2400–2483.5 MHz
Output max. power
| CONTROL CIRCUIT| READER CIRCUIT| BLUETOOTH LE MODULE
Design XS Reader P1619
| WRD0M| +21 dBm| + 8.5 dBm| 0194| | —
WRD0J| +25 dBm| +8 dBm| 0153| | 0136
WRD0S| +25 dBm| +2.8 dBm| 0130| | —
Design XS Keypad Reader P1620| WRD0MK| +21 dBm| + 8.5 dBm| 0194| | —
WRD0JK| +25 dBm| +8 dBm| 0153| | 0136
Modular XS Reader P0506
| WRM0B| +25 dBm| +8 dBm| 0152| | 0136
WRM0M| +21 dBm| + 8.5 dBm| 0194| | —
WRM0J| +25 dBm| +8 dBm| 0153| | 0136
Panel XS Reader P1825
| WRDP0B| +25 dBm| +8 dBm| 0151 / 0152| | 0136
WRDP0M| +25 dBm| + 8.5 dBm| 0194| | —
WRDP0J| +25 dBm| +8 dBm| 0153| | 0136
Mullion XS Reader P1826
| WRDM0B| +25 dBm| +8 dBm| 0151 / 0152| | 0136
WRDM0M| +25 dBm| + 8.5 dBm| 0194| | —
WRDM0J| +25 dBm| +8 dBm| 0153| | 0136
NCoder A1928
| EC09| +23 dBm| | 0164| 0172|
EC0B| +23 dBm| +8 dBm| 0164| 0172| 0136
EC0M| +21 dBm| + 8.5 dBm| 0182| | —
EC0H| +23 dBm| | 0164| 0173|
EC0J| +23 dBm| +8 dBm| 0164| 0173| 0136
EU DECLARATION OF CONFORMITY
EN Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun– Spain), declares that this access control equipment complies with the essential requirements and other relevant provisions of Directive 2014/53/EU (RED) and 2011/65/EU (RoHS). You will be able to find a copy of the original declaration of conformity at the following Internet address: https://www.saltosystems.com/certificate
UKCA DECLARATION OF CONFORMITY
Hereby, SALTO Systems S.L. (Arkotz Kalea (Pol. Lanbarren), 9 – 20180 Oiartzun–
Spain), declares that this access control equipment is in compliance with the
essential requirements and other relevant provisions of The Radio Equipment
Regulations 2017 and RoHS Regulation 2012. You will be able to find a copy of
the original declaration of conformity at the following Internet address:
https://www.saltosystems.com/certificate UK importer contact information:
Salto Systems, Ltd. Unit 1, The Court Holywell Business Park, Northfield Road,
CV47 0FS Southam, UK.
ELECTRICAL WARNINGS
Device powered by a power supply classified ES1 and PS1 according to IEC/EN/UL 62368-1 & AS/NZS 62368.1. The distance between this device and the human body must be higher than 20 cm.
MECHANICAL WARNINGS
The environmental conditions mentioned in the data sheets are always referred to as non-condensation situations. The SALTO product should be treated with care during the installation process to avoid any aggressive contact that may damage the unit. Do not bring the device into contact with oil, paints or acids. If you have questions or doubts on this, please contact your authorized SALTO supplier.
LEGAL WARNINGS
The user shall be responsible for the correct use and maintenance of the access control equipment according to the instructions herein. SALTO shall not be responsible for any defect, malfunction, loss or damage, whether direct or indirect, caused by or arisen from any improper installation or utilization of the equipment or which contravenes, transgresses or infringes in any manner the above-mentioned instructions. SALTO’s liability concerning the equipment is limited to the warranty provided. The warranty does not cover product failures due to repairs, modifications or product manipulations performed in the access control equipment or in the inner electromechanical structure by anyone other than authorized SALTO dealers or personnel
FCC COMPLIANCE STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits
for a Class B digital device, under part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used by the instructions may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This product is a radio transmitter and receiver to be used in mobile conditions
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information We, SALTO Systems, S.L., hereby declare
that the equipment bearing the model number specified above was tested
conforming to the applicable FCC Rules. Responsible Party – U.S. Contact
InformationV Salto Systems Inc. USA. 1780 Corporate Drive, Suite 400.
Norcross, GA. 30093. [email protected]
ISED COMPLIANCE STATEMENT
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation. Changes
or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device has been tested and found to comply with the limits for a Class B
digital device, under ICES-003.
Legend:
Remarks: [1] NCC Not applicable for models WRD0S, WRM0B, WRM0M, WRM0J, WRDP0M,
WRDM0M, EC09, EC0H, EC0M
IMDA COMPLIANCE LABEL
SALTO SYSTEMS S.L. www.saltosystems.com
All contents are current at the time of publication. SALTO Systems S.L.
reserves the right to change the availability of any item in this catalogue,
its design, construction, and/or materials.