SALTO E i 750 xx..P XS4 One High Security Installation Guide
- June 1, 2024
- SALTO
Table of Contents
SALTO E i 750 xx..P XS4 One High Security Installation Guide
DIMENSION
- PAS24 Standard complies only with 44mm and 54mm certified doors
Tool Required
-
TORX 20 (x6)
-
TORX 20 (x1)
-
TORX 20 (x6)
-
ALLEN 3 (x2)
-
BOLT (Depending on door thickness)
Mortise Lock not included
* For door thickness > 60mm 6 screws are supplied, but only 3 must be installed. Make sure to select the correct length (see page 3).
**SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn.
**
Select handing
Installation
| t | SCREWS BAG |
|---|---|
| 32 mm ÷ 47 mm | S2 |
| 45 mm ÷ 60 mm | S4 |
| 60 mm ÷ 68 mm | S1 |
| 68 mm ÷ 75 mm | S2 |
| 75 mm ÷ 83 mm | S3 |
| 83 mm ÷ 90 mm | S4 |
| 90 mm ÷ 98 mm | S1 |
| 98 mm ÷ 105 mm | S2 |
| 105 mm ÷ 113 mm | S3 |
| 113 mm ÷ 120 mm | S4 |
TO FIX CLOCKWISE
AT THIS POINT DO NOT CLOSE THE DOOR PROGRAM THE LOCK FIRST
*() XS4 One + LE7Sxx PAS24 testing pending
**
*() Depending on the door thickness and according to this chart you might
need to change the installed spindle by the spare one included on the box
**
t|
---|---
32 mm ÷ 40 mm|
38 mm ÷ 50 mm|
45 mm ÷ 53 mm|
53 mm ÷ 60 mm|
60 mm ÷ 68 mm|
68 mm ÷ 75 mm|
75 mm ÷ 83 mm|
83 mm ÷ 90 mm|
90 mm ÷ 98 mm|
98 mm ÷ 105 mm| ***
106 mm ÷ 113 mm|
113 mm ÷ 120 mm| ****
All contents current at time of publication.
SALTO Systems S.L. reserves the right to change availability of any item
in this catalogue, its design, construction, and/or materials.
