SALTO E10M Electronic Mortise Lock Installation Guide
- May 15, 2024
- SALTO
Table of Contents
SALTO E10M Electronic Mortise Lock
Specifications
- Model : E i 150xx.. series, E i 350xx.. series
- Dimensions :
- E i 150xx.. series: 22.5mm x 58.5mm
- E i 350xx.. series: 23.5mm x 61.5mm
- Mounting: M5 screws
- Contents : BOLT (x4), TORX 20 (x2), TORX 10 (x1), ALLEN 3 (x2)
Product Usage Instructions
Installation Guide:
1. Ensure the mortise lock is compatible with DIN-type locks.
2. Use the provided screws to mount the lock according to the dimensions specified for your model.
3. Secure the lock using the BOLT and TORX screws as indicated in the manual.
4. Follow the specific instructions for your lock model regarding additional components and settings.
Programming the Lock:
1. Before closing the door, program the lock by following the user manual.
2. Do not close the door until the lock has been properly programmed.
Additional Features:
- Panic and Privacy options are available with specific models like LE8Pxx.. and LE7Sxx..
- Follow the user manual for detailed instructions on utilizing these features.
FAQ
- Q: Can I install this lock on any type of door?
- A : The lock is designed for DIN-type mortise locks, ensuring compatibility before installation.
- Q: How do I program the lock?
- A : Before closing the door, refer to the user manual for step-by-step programming instructions.
Installation Instructions
- Mortise Lock not included
- SALTO recommends the use of a mortise lock, with a maximum 4º pre-turn.
Select handing
Installation
Battery change 
- AT THIS POINT DO NOT CLOSE THE DOOR, PROGRAM THE LOCK FIRST.
- All contents are current at the time of publication. 221495-ED1. – 20/09/2023
- SALTO Systems S.L. reserves the right to change the availability of any item in this catalog, its design, construction, and/or materials.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>