DOMETIC Igloo ICF18 Mobile Refrigerating Appliance Instruction Manual

DOMETIC Igloo ICF18 Mobile Refrigerating Appliance

Product Information

Cooling Boxes
Specifications

• Models: ICF18, ICF32, ICF40, ICF60, ICF80DZ
• Power Source: 12/24 V DC
• Suitable for: Camping use

Product Usage Instructions

Safety Instructions
Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.

Explanation of Symbols:

• DANGER! Safety instruction: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
• WARNING! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
• CAUTION! Safety instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
• NOTICE! Indicates a situation that, if not avoided, can result in property damage.
• NOTE: Supplementary information for operating the product.

Safety Instructions

• DANGER! Failure to obey these warnings will result in death or serious injury.
• WARNING! Failure to obey these warnings could result in death or serious injury.
• CAUTION! Failure to obey these cautions could result in minor or moderate injury.
• Health Hazard: Ensure proper ventilation to avoid health hazards.
• Explosion Hazard: Avoid exposing the cooling device to explosive materials or environments.

Scope of Delivery
The following items are included in the package:

1. Cooler
2. Connection cable for DC connection – ICF18, 32, 40, 60
3. Connection cable for DC connection – ICF80DZ
4. Connection cable for AC connection – all models
5. Operating manual

• Intended Use
  The cooling device is suitable for cooling food. It can be operated from a DC on-board power supply of a vehicle or boat, from a DC auxiliary battery, or from an AC power supply. It is designed for camping use.

• Function Description
  This product is only suitable for the intended purpose and application in accordance with these instructions. Proper installation, operation, and maintenance are necessary for satisfactory performance and to avoid possible failure. Igloo reserves the right to change product appearance and specifications.

FAQ (Frequently Asked Questions)

1. Q: Can I use this cooling box for purposes other than cooling food?
   A: No, this cooling box is specifically designed for cooling food and is not intended for any other purpose.

2. Q: Can I connect this cooling box to an AC power supply?
   A: Yes, the cooling box comes with a connection cable for AC connection that allows you to connect it to an AC power supply.

3. Q: Can I use this cooling box while driving my vehicle?
   A: Yes, the cooling box can be operated from a DC on-board power supply of a vehicle. However, make sure to secure the cooling box properly to avoid any accidents or damage.

4. Q: Can I use this cooling box in a boat?
   A: Yes, the cooling box can be operated from a DC on-board power supply of a boat. Ensure proper ventilation and secure the cooling= box to prevent any accidents or damage.

COOLING BOXES
Igloo ICF18, ICF32, ICF40, ICF60, ICF80DZ

• © 2023 Igloo Products Corp. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent, or be patent pending. The trademarks mentioned in this manual belong to Igloo Products Corp. All rights are reserved.
• Please read these instructions carefully and follow all instructions, guidelines, and warnings included in this product manual in order to ensure that you install, use, and maintain the product properly at all times. These instructions MUST stay with this product.
• By using the product, you hereby confirm that you have read all instructions, guidelines, and warnings carefully and that you understand and agree to abide by the terms and conditions as set forth herein. You agree to use this product only for the intended purpose and application and in accordance with the instructions, guidelines, and warnings as set forth in this product manual as well as in accordance with all applicable laws and regulations. A failure to read and follow the instructions and warnings set forth herein may result in an injury to yourself and others, damage to your product or damage to other property in the vicinity. This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates.

Explanation of symbols

•   DANGER!
  Safety instruction: Indicates a hazardous situation that, if not avoided, will result in death or serious injury.

• WARNING!
  Safety instruction: Indicates a hazardous situation that, if not avoided, could result in death or serious injury.

• CAUTION!
  Safety instruction: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.

• NOTICE!
  Indicates a situation that, if not avoided, can result in property damage.

• NOTE
  Supplementary information for operating the product.

Safety instructions

DANGER! Failure to obey these warnings will result in death or serious injury.
Electrocution hazard

• On boats: If the device is powered by the mains, ensure that the power supply has a residual current device (RCD), a residual cur-rent circuit breaker (RCCB), or a ground fault circuit interrupter (GFCI). Installation, especially in potentially damp areas, must be in accordance with all applicable installation regulations.
• Do not touch exposed cables with your bare hands. This applies especially when operating the device from the AC mains.
• Before starting the device, ensure that the power supply line and the plug are dry.
• WARNING! Failure to obey these warnings could result in death or serious injury.

Electrocution hazard

• Do not operate the cooling device if it is visibly damaged.
• If the cooling device’s power cable is damaged, it must be replaced with a suitable power cable or assembly available from the manufacturer or its service agent to prevent safety hazard.
• This cooling device may only be repaired by qualified personnel. Improper repairs can lead to considerable hazards.
• Plug the device to sockets that ensure proper connection especially when the device needs to be earthed.

Fire hazard

• When positioning the device, ensure the supply cord is not trapped or damaged.
• Do not locate multiple portable socket-outlets or portable power supplies at the rear of the device.
• Keep the ventilation openings on the device housing or in installations free of obstructions.
• Do not use any mechanical objects or other means to speed up the defrosting process, unless they have been recommended by the manufacturer for this purpose.
• Do not open or damage the refrigerant circuit.
• Do not use electrical devices inside the cooling device unless they are recommended by the manufacturer for that purpose.

Health hazard

• This device is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given super-vision or instruction concerning use of the device by a person responsible for their safety.
• Children must be supervised to ensure that they do not play with the device.
• Cleaning and user maintenance must not be carried out by unsupervised children.

Explosion hazard
Do not store any explosive substances such as spray cans with a flammable propellant in the cooling device.

CAUTION! Failure to obey these cautions could result in minor or moderate injury.
Electrocution hazard

• Before starting the cooling device, ensure that the power supply line and the plug are dry.
• Disconnect the cooling device from the power supply
  • Before each cleaning and maintenance
  • After every use

Health hazard
To avoid contamination of food, observe the following instructions:

• Check if the cooling capacity of the device is suitable for storing the food to be cooled.
• Food may only be stored in its original packaging or in suitable containers.
• Opening the cooling device for long periods of time can cause significant increase of the temperature in the compartments of the device.
• Clean regularly surfaces that can come in contact with food and accessible drainage systems.
• If the device is left empty for long periods:
  • Switch off the device.
  • Defrost the device.
  • Clean and dry the device.
  • Leave the lid open to prevent mold developing within the device.

NOTICE! Damage hazard
Check that the voltage specification on the data plate corresponds to that of the energy supply.

Only connect the cooling device as follows:

• With the DC connection cable to a DC power supply in the vehicle

• Or with the AC connection cable to an AC power supply

• Never pull the plug out of the socket by the cable.

• If the cooling device is connected to a DC outlet, disconnect the cooling device and other power consuming devices from the bat-tery before connecting a quick charging device.

• If the cooling device is connected to a DC outlet, disconnect the cooling device or switch it off when turning off the engine. Otherwise the battery may be discharged.

• The cooling device is not suitable for transporting caustic materials or materials containing solvents.

• The insulation of the cooling device contains flammable cyclo-pentane and requires special disposal procedures. Deliver the cooling device at the end of its life-cycle to an appropriate recycling center.

•  Do not place the cooling device near naked flames or other heat sources (heaters, direct sunlight, gas ovens, etc.).

• Risk of overheating!
  Ensure at all times that there is a minimum of 50 mm (1.97 in) ven-tilation on all sides of the cooling device. Keep the ventilation area free of any objects that could obstruct the air flow to the cooling components.
  Do not use or store the cooling device in closed compartments or areas with none or minimal air flow.

• Do not fill the inner container with ice or fluids.

• Never immerse the cooling device in water.

• Protect the cooling device and cables against heat and moisture.

• The device shall not to be exposed to rain.

Scope of delivery

Intended use

The cooling device is suitable for cooling food. The cooling device is designed to be operated from a DC on-board power supply of a vehicle or boat, from a DC auxiliary battery or from an AC power supply.

• The cooling device is suitable for camping use.
• The cooling device is intended to be used in household and similar applications such as
  • Staff kitchen areas in shops, offices and other working environments
  • Farm houses
  • Clients in hotels, motels and other residential type environments
  • Bed and breakfast type environments
  • Catering and similar non-retail applications
• This product is only suitable for the intended purpose and application in accordance with these instructions.
• This manual provides information that is necessary for proper installation and/or operation of the product. Poor installation and/or improper operating or maintenance will result in unsatisfactory performance and a possible failure.
• The manufacturer accepts no liability for any injury or damage to the product resulting from:
  • Incorrect assembly or connection, including excess voltage
  • Incorrect maintenance or use of spare parts other than original spare parts provided by the manufacturer
  • Alterations to the product without express permission from the manufacturer
  • Use for purposes other than those described in this manual Igloo reserves the right to change product appearance and product specifications.

Function description

• A low maintenance refrigerant circuit with compressor provides the cooling. The generous insulation and powerful compressor ensure efficient and fast cooling.
• The cooler is portable.
• The cooler can withstand a short-term inclination of 30°, for example on boats.

Scope of functions

• Power supply with priority circuit for connecting to the AC power supply
• Three-level battery monitor to protect the vehicle battery switches off automatically at low battery voltage
• Display with temperature gauge in °C and °F
• Temperature setting : With two buttons in steps of 1 °C (2 °F)
• Display dimming function with 3 brightness levels
• Removable divider

Operating and display elements

• Lid latches (fig. 2, page 4)
• Operating panel (fig. 3, page 4)

battery voltage
3| ERROR| LED flashes red: Device is switched on but not ready for operation
4| –| Display, shows the information
5| SET| Selects the input mode

•  Temperature setting
• Celsius or Fahrenheit display
• Set battery monitor
• Set brightness of display

6| DOWN –| Press once to decrease the value
7| UP +| Press once to increase the value

Connection sockets (fig. 4, page 5)

Operation

To avoid food waste, note the following:

• Keep temperature fluctuation as low as possible. Only open the cooling device as often and for as long as necessary. Store the foodstuff in such a way that the air can still circulate well.
• Adjust the temperature to the quantity and type of the foodstuff.
• Foodstuff can easily absorb or release odor or taste. Always store food-stuff covered or in closed containers/bottles.

Before initial use

NOTE
Before starting your new cooler for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to the chapter “Cleaning and maintenance” on page 23).
Opening or removing the lid (fig. 5, page 6)

• To open the lid, unlatch (A).
• To remove the lid, push the lid beyond the lid stop position (B).

Selecting the temperature units
Temperature display units can be switched between Celsius and Fahrenheit as follows:

1. Switch on the cooler.
2. ICF18, ICF32, ICF40, ICF60: Press the “SET” button (fig. 3 5, page 4) twice.
3. ICF80DZ: Press the “SET” button (fig. 3 5, page 4) three times.
4. Use the “UP +” (fig. 3 7, page 4) or “DOWN –” (fig. 3 6, page 4) buttons to select Celsius or Fahrenheit.
   The selected temperature unit then appears in the display for a few sec-onds. The display flashes several times before it returns to the current temperature.

Saving energy

• Choose a well ventilated location which is protected from direct sunlight
• Allow warm food to cool down first before placing it in the cooling device to keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
• If the cooler has a basket: For optimal energy consumption, position the basket according to its position on delivery.
• On a regular basis, make sure the lid seal still fits properly.
• Defrost the cooler once a layer of ice forms.
• Avoid unnecessarily low temperatures.

Connecting the cooler

• Connecting to a battery (vehicle or boat)

• The cooler can be operated with 12 V or 24 Vg.

• NOTICE! Damage hazard
  Disconnect the cooler and other consumer units from the battery before you connect the battery to a quick charging device. Overvoltage can damage the electronics of the device.

• For safety reasons the cooler is equipped with an electronic system to prevent polarity reversal. This protects the cooler against short circuiting when connecting to a battery.

Using the fused DC plug
NOTICE! Damage hazard
For protection of the device the DC cable supplied includes a fuse inside the plug. Do not remove the fused DC plug.
Only use the DC cable supplied.

1. Plug the DC connection cable (fig. 1 2 or 3, page 3) into the DC voltage socket of the cooler (fig. 4 4, page 5).
2. Connect the connection cable to a DC power outlet.

Connecting to an AC power supply

DANGER! Electrocution hazard
Failure to obey these warnings will result in death or serious injury.

• Never handle plugs and switches with wet hands or if you are standing on a wet surface.
• If you are operating your cooler on board a boat from a AC power supply, you must install a residual current circuit breaker between the AC power supply and the cooler.
  Seek advice from a trained technician.

The coolers have an integrated multi-voltage power supply with priority circuit for connecting to an AC voltage source. The priority circuit automatically switches the cooler to AC operation if the device is connected to an AC power supply, even if the DC connection cable is still attached.
When switching between the AC power supply and the battery supply, the red LED may light up briefly.

1. Plug the AC connection cable (fig. 1 4, page 3) into the AC voltage socket of the cooler (fig. 4 1,page 5).
2. Connect the connection cable to an AC power outlet.

Using the battery monitor

• The device is equipped with a multi-level battery monitor that protects your vehicle battery against excessive discharging when the device is connected to the on-board DC supply.
• If the cooler is operated when the vehicle ignition is switched off, the cooler switches off automatically as soon as the supply voltage falls below a set level. The cooler will switch back on once the battery has been recharged to the restart voltage level.
• NOTICE! Damage hazard

When switched off by the battery monitor, the battery will no longer be fully charged. Avoid starting repeatedly or operating current consumers without longer charging phases. Ensure that the battery is recharged.

• In “HIGH” mode, the battery monitor responds faster than at the levels “LOW” and “MED” (see the following table).

The battery monitor mode can be selected as follows:

1. Switch on the cooler.
2. ICF18, ICF32, ICF40, ICF60: Press the “SET” button (fig. 3 5, page 4) three times.
3. ICF80DZ: Press the “SET” button (fig. 3 5, page 4) four times.
4. Use the “UP +” (fig. 3 7, page 4) or “DOWN –” (fig. 3 6, page 4) buttons to select the battery monitor mode.
5. ✔ Display will be as follows : Lo (LOW), Πd (MED), Hi (HIGH)
6. ✔ The selected mode then appears in the display for a few seconds. The dis-play flashes several times before it returns to the current temperature.

NOTE
When the cooler is supplied by a starter battery, select the battery monitor mode “HIGH”. If the cooler is connected to a supply bat-tery, the battery monitor mode “LOW” will suffice.

Using the cooler
NOTICE! Overheating hazard
Ensure at all times that there is sufficient ventilation so that the heat that generated during operation can dissipate. Ensure that the ventilation slots are not covered. Make sure that the device is sufficiently far away from walls and other objects so that the air can circulate.

1. Place the cooler on a firm foundation.
   Make sure that the ventilation slots are not covered and that the heated air can dissipate. We recommend keeping a gap of at least 50 mm around ventilation holes.
   NOTICE! Damage hazard
   Place the cooler as shown (fig. 1, page 3). If you operate the cooler in a different orientation it can be damaged.

2. Connect the cooler (see chapter “Connecting the cooler” on page 16).
   NOTICE! Excessively low temperature hazard
   Ensure that the only those objects are placed in the cooler that are intended to be cooled at the selected temperature.

3. Press the “ON/OFF” button (fig. 3 1, page 4) for between one and two seconds.

   • ✔ The LED “P” lights up (fig. 3 2, page 4).
   • ✔ The display (fig. 3 4, page 4) switches on and shows the current temperature.
   • ✔ The cooler starts cooling the interior.

NOTE
When operating from a battery, the display switches off automatically if the battery voltage is low. The LED “P” flashes orange.

Setting the temperature
ICF18, ICF32, ICF40, ICF60:

1. Press the “SET” button (fig. 3 5, page 4) once.
2. Use the “UP +” (fig. 3 7, page 4) and “DOWN –” (fig. 3 6, page 4) but-tons to select the cooling temperature.
   The cooling temperature appears in the display for a few seconds. The dis-play flashes several times and then the current temperature is displayed again.

ICF80DZ:

1. Press the “SET” button (fig. 3 5, page 4):
   • once for the large compartment
   • twice for the small compartment
   • The chosen compartment display blinks.
2. Use the “UP +” (fig. 3 7, page 4) and “DOWN –” (fig. 3 6, page 4) buttons to select the cooling temperature. Each compartment can be set to work as a refrigerator or a freezer.
3. The cooling temperature appears in the chosen compartment display for a few seconds. The display flashes several times and then the current temperature is displayed again.

Switching a compartment off or on (ICF80DZ)

If only one compartment is required, the other compartment can be switched off to save energy.
Switching off a compartment
If the display of the compartment shows a temperature, you can switch off the compartment as follows:

1. Press the “SET” button (fig. 3 5, page 4):
   • Once for the large compartment
   • Twice for the small compartment
   • The display of the respective compartment blinks.
2.  Press the “ON/OFF” button (fig. 3 1, page 4).
   “OFF” flashes for five seconds on the display of the respective cooling compartment, then “OFF” is displayed.

Switching on a compartment
If the display of the compartment shows “OFF”, you can switch on the compartment as follows:

1. Press the “SET” button (fig. 3 5, page 4):

   • Once for the large compartment
   • Twice for the small compartment
     ✔ The display of the respective compartment blinks.

2. Press the “ON/OFF” button (fig. 3 1, page 4).
   The cooling temperature appears in the display for a few seconds. The dis-play flashes several times and then the current temperature is displayed.

Setting the display brightness
The display brightness can be dimmed for low ambient light conditions. To set the dimming level of the display proceed as follows:

1. Switch on the cooler.
2. ICF18, ICF32, ICF40, ICF60: Press the “SET” button (fig. 3 5, page 4) four times.
3. ICF80DZ: Press the “SET” button (fig. 3 5, page 4) five times.
4. Use the “UP +” (fig. 3 7, page 4) or “DOWN –” (fig. 3 6, page 4) buttons to set the brightness of the display.
5. Display will be as follows: d0 (default), d1 (medium), d2 (dark)
6. The display shows the set mode for several seconds. The display flashes twice before it returns to the current temperature.

NOTE

• The factory setting of brightness of the display is d0 (default).
• If a fault occurs, the brightness automatically reverts to bright-ness d0 (default). After troubleshooting the set brightness is reactivated.

Switching off the cooler

1. Empty the cooler.
2. Switch the cooler off.
3. Pull out the connection cable.
   If you do not want to use the cooler for a longer period of time:
   Leave the lid slightly open. This prevents odor build-up.

• Defrosting the cooler
  Humidity can form frost in the interior of the cooler or on the evaporator. A layer of frost up to ~3mm thick is normal. Excessive build up however reduces the cooling capacity, and should be defrosted periodically.

• NOTICE! Damage hazard
  Never use hard or pointed tools to remove ice or to loosen objects which have frozen in place.

To defrost the cooler, proceed as follows:

1. Take out the contents of the cooler.
2. If necessary, place them in another cooling device to keep them cool.
3. Switch off the device.
4. Leave the lid open.
5. Wipe off the defrosted water.

Replacing the AC fuse

DANGER! Electrocution hazard
Failure to obey this warning will result in death or serious injury. Disconnect the power supply and the connection cable before you replace the device fuse.

1. Disconnect the power supply to the device.
2. Remove the connection cable.
3. Pry out the fuse insert (fig. 4 2, page 5) with a screwdriver.
4. Replace the defective glass fuse with a new one that has the same type and rating (4 A, 250 V).
5. Press the fuse insert back into the housing.
6. Reconnect the power supply to the device.

Replacing the device DC fuse

1. Disconnect the power supply to the device.
2. Pry out the fuse cover (fig. 4 3, page 5) to access the fuse.
3. Reverse the fuse cover and use the hook to remove the fuse.
4. Replace the defective fuse with a new fuse of the same type (Automotive Standard blade fuse, 10 A).
5. Re-fit the fuse cover.
6. Reconnect the power supply to the device.

Replacing the DC plug fuse

• Replace the DC plug fuse as shown in fig. 6, page 7.
• Disconnect the power supply to the cooler.

ICF18, ICF32, ICF40, ICF60:

• Pull the adapter sleeve (A1) off the plug.
• Unscrew the screw from the upper part of the housing (A2).
• Remove the upper part of the housing from the lower part of the housing (B1).
• Take out the contact pin (B2).
• Replace the defective fuse (C1) with a new fuse of the same type and rating (8A 32V).
• Reassemble the plug in the reverse order.

ICF80DZ:

• Replace the defective fuse with a new fuse of the same type and rating (10A).
• Proceed as shown in fig. 6, page 7.

Replacing the light PCB

NOTICE! Damage hazard
The lamp can only be replaced by the manufacturer, a service agent or similarly qualified person to avoid hazard.

Cleaning and maintenance

WARNING! Electrocution hazard
Failure to obey this warning could result in death or serious injury. Always disconnect the device from the power supply before you clean and service it.

NOTICE! Damage hazard

• Never clean the cooling device under running water or in dish water.
• Do not use abrasive cleaning agents or hard objects during cleaning as these can damage the cooling device.
• Occasionally clean the cooling device interior and exterior with a damp cloth.
•  Make sure that the air inlet and outlet vents on the device are free of any dust and dirt, so that heat can be released and the device is not damaged.

Troubleshooting

Warranty

If the product does not work as it should, please contact your retailer or the manufacturer’s branch in your country (see dometic.com/dealer). The war-ranty applicable to your product is 3 year(s). For repair and warranty processing, please include the following documents when you send in the device:

• A copy of the receipt with purchasing date
• A reason for the claim or description of the fault
• Australia only
• Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major fail-ure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
• New Zealand only
• This warranty policy is subject to the conditions and guarantees which are mandatory as implied by the Consumer Guarantees Act 1993(NZ).
• Local support
• Please find local support at: dometic.com/contact

Disposal
Recycling products with non-replaceable batteries, rechargeable batteries, or light sources

• If the product contains any non-replaceable batteries, rechargeable batteries, or light sources, you don’t have to remove them before disposal.
• If you wish to finally dispose of the product, ask your local recycling center or specialist dealer for details about how to do this in accordance with the applicable disposal regulations.
• The product can be disposed free of charge.

Recycling packaging material
Place the packaging material in the appropriate recycling waste bins wherever possible.

Technical data

Further product information can be accessed via QR code on the energy label on the product or via eprel.ec.europa.eu.

| ICF18| ICF32| ICF40
---|---|---|---
Total volume:| 19l| 32 l| 39l
Connection voltage:| 12/24 V 100 to 240 V
Rated current:|

• 12 V : 4.5 A
• 24 V: 2.1 A
• 240 : 0.5 A

|

• 12 V : 5.1 A
• 24 V: 2.5 A
• 240 V : 0.54 A

|

• 12 V : 6 A
• 24 V: 2.6 A
• 240 V : 0.6 A

Cooling capacity:| -18°C to +20°C (0°F to +68°F)
Climate class:| N, T
Ambient temperature:| +16 °C to +43 °C (+60 °F to +110 °F)
Refrigerant:| R134a
Refrigerant volume:| 20g| 26 g| 30g
CO2 equivalent:| 0.029 t| 0.034 t| 0.043 t
| ICF18| ICF32| ICF40
---|---|---|---
Global warming potential (GWP):| 1430
Dimensions

• (W x D x H) (Handles up):
• (W x D x H)
• (Handles down):

|

• 500 x 300 x 523 mm
• 500 x 329 x 422 mm

|

• 616 x 374 x 452 mm
• 616 x 374 x 393 mm

|

• 616 x 374 x 520 mm
• 616 x 374 x 461 mm

Weight:| 9.9 kg| 12.5 kg| 12.9 kg
| ICF60| ICF80DZ
---|---|---
Total volume:| 59 l| 78l (44 l/34 l)
Connection voltage:| 12/24 V 100 to 240 V
Rated current:|

• 12 V : 6.1 A
• 24 V : 2.9 A
• 240 V : 0.6 A

|

• 12 V : 7.3 A
• 24 V : 3.4 A
• 240 V : 0.63 A

Cooling capacity:| -18°C to +20°C (0°F to +68°F)
Climate class:| N, T
Ambient temperature:| +16 °C to +43 °C (+60 °F to +110 °F)
Refrigerant:| R134a
Refrigerant volume:| 34g| 34g
CO2 equivalent:| 0.049| 0.049
Global warming potential (GWP):| 1430
Dimensions

• (W x D x H) (Handles up): (W x D x
• H) (Handles down):

|

• 721 x 442 x 530 mm
• 721 x 442 x 471 mm

|

• 874 x 447 x 556 mm
• 874 x 447 x 495 mm

Weight:| 15.4 kg| 20.4 kg

NOTE
If the ambient temperature is above +32 °C (+90 °F), the minimum temperature cannot be attained.
Conformity:

• This product contains fluorinated greenhouse gases

• The cooling unit is hermetically sealed.

• YOUR LOCAL SUPPORT

  • dometic.com/contact

• A complete list of Dometic companies, which comprise the Dometic Group, can be found in the public filings of: DOMETIC GROUP AB 15 SE-17154 Solna Sweden

• 4445104001 2023-09-28

References

• Contact Us | Support for You | Dometic USA
• Find a Dealer | Dometic USA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>