WANTJOIN FM-01C Electric Commercial Glass Washer Instructions
- June 1, 2024
- Wantjoin
Table of Contents
WANTJOIN FM-01C Electric Commercial Glass Washer
Product Information
Specifications
- Noise Level: Normal noise when operating
- Water Temperature: Do not use in hot water
- Switch Safety: Keep water away from the switch
- Detergent Recommendation: Use low-foaming detergent to avoid over foaming during operation
- Water Level: Must be lower than the MAX line before operation
FAQ
- Q: Why is noise normal during operation?
- A: The noise is a normal phenomenon due to the functioning of the glass washer’s components.
- Q: Can I use hot water in the glass washer?
- A: No, it is recommended to never use hot water in the glass washer to avoid damage to the appliance.
- Q: What happens if water exceeds the MAX line?
- A: Exceeding the MAX line can lead to potential spillage and affect the washing performance, ensure water level is below this line.
Product Usage Instructions
Safety Precautions;
- Ensure the appliance is connected to a grounded outlet and keep water away from electrical components.
Filling with Water:
- Before operation, fill the glass washer with water ensuring the water level is below the MAX line.
Adding Detergent:
- Only use low-foaming detergent specifically designed for glass washers to prevent excessive foaming during operation.
Operating the Glass Washer:
- Switch on the glass washer and carefully place the glasses inside. Allow the machine to clean the glasses as per the recommended cycle.
Cleaning and Maintenance:
- After each use, clean the glass washer thoroughly and follow the maintenance instructions provided in the manual.
Precautions
RED WINE GLASS
(APPLICABLE FOR THE MIDDLE BRUSH HEAD)
BEER GLASS
(APPLICABLE FOR THE SURROUNDING BRUSH HEAD)
WHISKEY GLASS
(APPLICABLE FOR THE SURROUNDING BRUSH HEAD)
CUPS DIAMETER: MIN 2 inches -MAX 3.9 inches
Noisy is a Normal phenomenon when operating.
Warning
- NEVER used in hot water
- KEEP water away from the switch
- ONLY use low-foaming detergent to avoid over foaming while operation
- Water level must lower than the MAX line before operation
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>