LEDYi Lighting EV1 1 Channel Constant Voltage Power Repeater Instruction Manual
- June 5, 2024
- LEDYI Lighting
Table of Contents
LEDYi Lighting EV1 1 Channel Constant Voltage Power Repeater
Features
- 5-36V constant voltage power repeater.
- one channel, 8A.
- To receive PWM signal control.
- Power repeater in series or in parallel to expand output unlimitedly.
- Apply to single color constant voltage LED strip or module.
Technical Parameters
Input and Output
- Input voltage 5-36VDC
- Input current 8.5A
- Input signal PWM
- Output voltage 5-36VDC
- Output current 8A
- Output power 40-288W
- Output type Constant voltage
Safety and EMC
- EMC standard (EMC) ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4
- Safety standard(LVD) EN 62368-1:2020+A11:2020
- Certification CE,EMC,LVD
Warranty and Protection
- Warranty 5 years
- Protection Reverse Polarity
Environment
- Operation temperature Ta: -30OC ~ +55OC
- Case temperature (Max.) T c: +85OC
- IP rating IP20
Weight
- Net weight 0.042kg
- Gross weight 0.053kg
Mechanical Structures and Installations
Wiring Diagram
Parallel connection
Series connection
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
|---|
No light
| 1. No power.
2. Wrong connection or insecure.
| 1. Check the power.
2. Check the connection.
Uneven intensity between front and rear,with voltage drop| 1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
| 1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
Safety & Warnings
- The product shall be installed and serviced by a qualified person.
- This product is non-waterproof. Please avoid the sun and rain.
- Good heat dissipation will prolong the working life of the controller,Please ensure good ventilation.
- Please check if the output voltage of any power supplies used comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Read User Manual Online (PDF format)
Loading......