Setting up your CleanView® Connect Robotic Vacuum | How to Video
- June 7, 2024
- Bissell
Table of Contents
Setting Up Your Robot
- Pick a space to set up your dock that has 40 inches on each side and no obstructions in front of it
- Plug power adapter into the dock and then the wall
- Keep robot off the dock and turn the robot on
- Once the robot is turned on, put it on the dock to charge
- The first charge will take 4-5 hours
- Keep the charging contacts on your robot and docking station clean
- Use a dry cloth to wipe off charging contacts. Do not clean with liquid
- Your robot’s lights communicate charging needs. If the light ring is off, the button light is breathing white and it beeps twice, your battery is low and needs to be charged
- Place your robot on the docking station to charge
- It will beep once, the light ring will illuminate and the button light will stop breathing when the battery is fully charged
pOGacERkRpE
- Recipient Email
Your Email
Your Name
Was this answer helpful?
Yes
No
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>