smartomat FlagFit Bluetooth and GPS in the phone User Manual

FlagFit Bluetooth and GPS in the phone
User Manual

Training/Overview of sports

You can enter the overview of sports with a long press of the touch button. You can switch between individual sports by a short press. You can start measuring by a long press and end it with another one.

Weather is updated after synchronization with a mobile phone and it takes al I the data from it.
We would like to thank you for the purchase of our product.
Please study this manual before use. The manufacturer is not liable for any damage caused by an improper use of the product.

Product description

Operating system

Charging and Turning on

1. Fully charge the watch before first use. Use the enclosed charging dock that is included in the package. Always charge for 2 hours at maximum and do not handle the watch when charging.
2. Attach the magnetic charging cable to the charging contact of the smartwatch. Connect the charging cable to the USB port of a computer, laptop, or network adapter of ordinary mobile phones (5V voltage). When charging, there must not be any contact between the magnetic end of the charging cable with the band. There could be a short circuit of the charger or damage to the band. Therefore, charge the watch only with an opened band
3. If the watch screen does not light up automatically, slightly press the side button for at least 3 seconds.

You can enter the overview of functions with a long press of the touch button. You can switch between individual functions with a short press.
You can activate functions with a long press.

Other possible functions must be set in the application in the tab “Smart” and their functioning depends on the phone settings, but also on the particular version of the watch.  These are, for example, alerts about incoming phone calls, SMS, alerts from social networks, turning the screen on by rotating your wrist, alarm clock, the do not disturb mode  (DND mode), continuous measuring of heart rate (it is performed automatically in a set interval) and others.

How to pair the watch with a mobile phone

It is necessary to pair the watch with the recommended application “FlagFit 2.0” for its setup and proper function. Download the application using the QR code below or search it in the Store Play/App Store.

https://rebrand.ly/gg9ievy| https://rebrand.ly/3cd54

1. We recommend enabling all permissions requested by the application during its installation.
2. Depending on the model of the used phone, we recommend subsequently checking the settings of permissions even in the phone application manager, in particular the permission of location/position.
3. Turn on Bluetooth and GPS in the phone before pairing (check, whether the visibility for all devices is turned on for an unlimited time).
4. Open the application and register your own account.
5. ln the application, click in the tab “Me” on “Add device” and click on your device.
6. We recommend putting the watch close to the phone during pairing.
7. Wait until the watch pairs.
8. Setup the watch in the tab “Smart”

Warnings and recommendations

1. To store the measured values, synchronize the watch daily with the phone application. The measured values are reset in the bracelet during the night.

2. The measured values are for guidance only and they may differ from the values measured on certified medical devices depending on the measuring method and fastening of the bracelet. The sensor on the back side of the bracelet must fit close to the arm and the strap must be fastened optimally. If the strap is loose, measurements will be inaccurate.

3. 1t is necessary to pair the bracelet with a phone to set the correct date and time. Time and date are set automatically.

4. The bracelet resistance is IP68 — protected against immersion in water (e.g. swimming for up to 30 minutes in the maximum depth of 1.5m). The bracelet is not intended for diving and long-term immersion. Do not use in hot (warm) water, during massage showering, in steam, etc. Do not manipulate the watch in water. We recommend taking your bracelet to water and shower only exceptionally due to the possible damage to charging contacts in case of poor drying. Immediately and thoroughly dry up your bracelet after its contact with water.

5. I am not receiving any alerts about incoming phone calls or SMS — check, whether the bracelet is connected with the phone and whether such alerts are permitted in the phone settings and in the application.

6. The bracelet cannot be paired with my phone — possible solutions:
   – check, whether the bracelet and the phone are sufficiently charged
   – check, whether the Bluetooth and GPS of the phone are on and whether you have permitted the determination of location/position in the phone settings
   – place the watch close to the phone – check the phone system update
   – uninstall the application and install it again
   – restart the phone and turn the bracelet off and on again
   Controlling the watch
   You can turn the bracelet on, activate and end functions, and return to the menu by a long press of the touch button.
   You can switch between functions with a short press of the touch button.
   You can call the offer of dial by a long press of the touch button.
   List between dials by a short press of the touch button.
   Activate the selected dial with a long press of the touch button.
   Overview of activities will display steps, distance, and calories.
   Wait for the start and end of the measuring after switching. The bracelet must be in the correct position on the wrist. Measuring can be started even directly in the application.

7. The green sensor light is flashing — measurement or data transfer is in progress.

8. We recommend occasionally restarting the bracelet (turn it off/on) for its proper functioning, and resetting and updating the firmware. Also, always update the application to its newest version.

9. Do not charge the bracelet for more than 2 hours. The capacity and lifetime of the battery are reduced by incorrect charging. In particular, the surrounding environment (e.g. temperature) and the number of enabled functions have an impact on battery life. Enabling some functions may drain the battery within a few hours. Over time, the battery capacity decreases naturally. If you do not use the bracelet, do not leave it discharged for a long time and recharge it from time to time.

10. Protect the watch from falling and impact. It may cause improper functioning of the watch or it may lead to its permanent malfunction.

11. Contact the manufacturer in case of other questions.

Note:
All pictures and descriptions of functions may vary depending on the particular version of the product and application.

Manufacturer:
SMARTOMAT s.r.0., 1.m~je 97, 460 02 Liberec, Czech Republic

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>