FLUIGENT FLPG Plus Electric Air Pump User Manual
- June 6, 2024
- FLUIGENT
Table of Contents
FLUIGENT FLPG Plus Electric Air Pump User Manual
BEFORE THE FIRST USE
Remove the transport screws under the FLPG Plus.
These screws are used to protect the compressor inside during the transport.
Please keep these screws in case of future transport.
PRODUCT OVERVIEW
The pressure value displayed is in units of bar (1 bar = 14.5 psi)
The rear pressure output delivers the same pressure as the front output. One or the other can be used for better tubing management, or both at the same time to pressurize two pressure controllers.
QUICK START GUIDE
Please, always place the FLPG Plus on a horizontal and stable surface.
Keep clear for at least 10 cm at sides of FLPG Plus. This allows for
ventilation and the air drying system to function properly.
Start using the FLPG Plus
- Supply and power ON the FLPG Plus
- Pull out the pressure regulator knob to unlock it
Locked Unlocked (orange ring is visible)
QUICK START GUIDE
- Turn the knob to change the output pressure (from 0.1 bar to 2.30 bar) in order to meet the supply requirement of the pressure controller channel range
Different channel ranges require different pressure supply. The following table shows the cases of Fluigent’s pressure controllers.
-
The MCFS 2000 mbar range channel is compatible with the 2.3 bar supply pressure, despite its nominal supply pressure of 2.4 bar
The FLPG Plus is designed to work at 2.30 bar or below.
Do not operate above this value, or the output pressure can become unstable. This may damage the FLPG Plus and the connected devices.-
Connect the pressure controller’s pressure inlet to the FLPG Plus’ pressure output (front or/and rear)
-
Power OFF the FLPG Plus after use. Doing so will extend service life of the compressor
-
OUTPUT CAPACITY
The FLPG Plus’ output capacity is the number of channels it can drive simultaneously. This capacity depends on the output pressure set with the pressure setting regulator.
When set to 2.1 bar to drive the Flow EZTM 2000 mbar channels (or 2.3 bar to
drive MFCS 2000 mbar channels), the FLPG Plus can
drive up to 4 channels at the same time.
When set to 1.1 bar to drive the Flow EZTM 1000 mbar channels (or 1.3 bar to
drive MFCS 1000 mbar channels), the FLPG Plus can
drive up to 8 channels at the same time.
When set to lower pressures to drive lower range channels (see tables on page
6 for more information), the FLPG Plus can drive up
to 8 channels at the same time.
Do not connect more channels than the numbers shown a b ove . O t h e r w i s
e , t h e o u t p u t p r e s s u r e m ay d r o p a n d
b e come u n s t a b l e , l ea d i n g to p o s s i b l e d a m a g e o f t h
e F L P G P l u s a n d t h e c o n n e c t e d p r e s s u r e c o n t r o l
l e r .
SPECIFICATIONS
Product Number: FLPG005
Output pressure: From 0.1 bar to 2.3 bar
Output capacity: 8 Fluigent’s 1000 mbar range channels
8 Fluigent’s below 1000 mbar range channels
Output capacity: 4 Fluigent’s 2000 mbar range channels
Voltage: 24V DC
Current: 1.6 A
Dimensions: 179 x 154 x 264 mm (W x H x D)
Weight: 5.9 kg
Environment: Indoor clean environment 15 -25 °C
RH < 65% (no condensation)
Lifetime: 10 000h**
- Higher output capacity version exist, consult Fluigent sales representive **Maintenance is recommended after this duration
TECHNICAL SUPPORT
Still have questions? E-mail us at:
support@fluigent.com
Or call our technical support team directly
Fluigent S.A.S +33 1 77 01 82 65
Fluigent Inc. +1 (978) 934 5283
Fluigent GmbH +49 3641 277 652
For a fully detailed FAQ for all Fluigent products, please visit: http://www.fluigent.com/faqs/
Interested in Fluigent products ?
To view the complete Fluigent product line and application notes
For commercial requests, please e-mail:
contact@fluigent.com or your local office
For tutorial videos about the LineUpTM series, please visit Fluigent on YouTube
Fluigent
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>