CREATIVE EF0930 Outlier Pro True Wireless Sweatproof In Ears with ANC User Guide

OUTLIER® PRO
TRUE WIRELESS SWEATPROOF IN-EARS WITH
ACTIVE NOISE CANCELLATION
QUICK START GUIDE

OVERVIEW

CONTROLS

i) Playback Mode

Note: Certain playback functions can be customized through the Creative app when connected via Bluetooth
ii) Call Mode

Note: Volume adjustments on the earbuds are unavailable during incoming/outgoing calls
iii) Entering Bluetooth Pairing Mode Manually

Note: The earbuds can only manually enter Bluetooth Pairing mode when no audio is being played. Tap and hold either earbud for 3s to enter Bluetooth Pairing mode
iv) Powering On / Off Earbuds Manually

CREATIVE APP

Set up your product, customize playback controls, personalize audio settings, and enhance the product’s performance, and more with the Creative app.

• Customize buttons for a personalized playback experience
• Adjust noise control level through Ambient Mode and Active Noise Cancellation
• Modify audio settings with Graphic EQ
• Perform software upgrades, product registration, and more

Download the Creative App from:
iOS App Store Google Play Store

EARBUDS FIT GUIDE

Gently push and wiggle the earbuds into the respective ear canal until a good seal is made to ensure proper fitting. Additional pairs of silicone tips are also provided so users can achieve an optimal fit.

CHARGING CREATIVE OUTLIER PRO WIRELESSLY

Creative Outlier Pro supports Qi-enabled wireless charging. To charge both the charging case and earbuds wirelessly, slot the earbuds into the case’s magnetic charging slots, then place the charging case on the wireless charging pad. Do note that the earbuds cannot be charged wirelessly without its charging case.
Wireless charging pad not included

MASTER RESET

Touch both earbuds and hold for 5s while they are in the charging case to perform a Master Reset. Upon completion, earbuds will blink three times in blue. Master Reset is reserved for cases where users encounter issues while earbuds are in use or during situations such as: Bluetooth Pairing failure, random LED blinking, failure to pair a secondary earbud with the main earbud or to reset all data.
Creative True Wireless Stereo Earbuds: Common Connectivity Issues
This article highlights phenomena and recommendations for music cutting out and earbuds that do not stay connected.
When pairing a smart mobile device with TWS (True Wireless Stereo) earbuds, the signal is strongest when there is a line of sight between the pairing devices.
If the signal passes through the body, which is mostly made up of water fluid, it may get absorbed, which may result in pairing difficulty. If the mobile device is already connected to the TWS earbuds, it may result in signal loss or the earbuds may get disconnected.

Headphones Drivers
• 10 mm Graphene-coated Drivers x 2
• Frequency Response: 20–20,000 Hz| Battery
• Earbuds (Left and Right) Lithium-ion polymer battery:
3.6V 85 mAh 0.306 Wh
• Battery Charging Case
Lithium-ion polymer battery: 3.7V 900 mAh 3.330 Wh
---|---
Microphones
• Type: Omni-directional x 6
• MEMS
• Frequency Response: 100–10,000 Hz
• Sensitivity (1 kHz): -38 dBV / Pa| Input Rating
• 5V 1A
Interface
• Qi-compatible wireless charging, USB-C (charging)| Total Playtime
• Up to 60 hours
Bluetooth Version
• Bluetooth 5.2| Charging Time
• 2–3 hours (Wired / wireless charging)
Bluetooth Profiles
• A2DP (Wireless stereo Bluetooth)
• AVRCP (Bluetooth remote control)
• HFP (Hands-free profile)| Audio Codecs
• AAC, SBC
Wireless Operating Range
• Up to 10m / 33 ft
• Maximum RF Output Power: 10 dBm
• Operating Frequency: 2402–2480 MHz| Operating Temperature
• 0–45°C

OTHER INFORMATION

Please visit creative.com/compliance/OutlierPro for the user guide, safety, and regulatory information, ErP information where applicable, and battery removal instruction which is meant strictly for independently qualified professionals.
Please visit creative.com/support/OutlierPro for all other support related to your product.
Note: Compliance markings are located at the bottom of the product
Hereby, Creative Labs Pte. Ltd. declares the Bluetooth headset, model no. EF0930 is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC

LIMITED WARRANTY

Creative warrants that the accompanying product is free from material or workmanship defects for a period of 12 months (non-transferable Creative Warranty period) from your purchase date. In the event of a genuine product failure, Creative will assume repair or part replacement (new or refurbished) within the Creative Warranty period. However, this Creative Warranty does not cover (among other things) consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time, normal wear and tear, abnormal usage, improper storage and handling, unauthorized modifications or repair, damages arising from an Act of God and theft. In the event of a genuine product failure, you must provide Creative with the product and proof of purchase of the product by a dated itemized receipt.
This is only a summary of the Creative Warranty terms. For the full details on the Creative Warranty period of your product, Creative Warranty terms, product returns, and repair procedure, and Creative Customer Support services and contact information, you are advised to refer to the full version of the Creative Warranty at Web site http://creative.com/warranty.
We also recommend you register your product with us at www.creative.com/ register to enjoy a host of additional product benefits that include the latest news and promotions. Note that your entitlement to the Creative Warranty is not dependent on product registration.
NOTE: This warranty gives you specific legal rights. You may have other rights, which vary from country to country. Certain limitations in this warranty are not permitted by the jurisdiction of some countries, so some limitations here may not apply to you.

Safety & Regulatory Information

Read this instruction carefully and completely before using the product. Refer to the following information to use your product safely, and to reduce the chance of electric shock, short-circuiting, damage, fire, hearing impairment or other hazards. Improper handling may void the warranty for your product. For more information, read the warranty available with your product.

• • Always keep the product dry and do not expose it to extreme temperatures (hairdryer, heater, extended exposure to sunlight, etc.) to avoid corrosion or deformation.
• Do not expose your product to water and moisture. If your product is moisture-resistant, take care not to immerse it in water or expose it to rain.
• Charge products with built-in rechargeable batteries at ambient temperatures between 10 and 40°C/50 and 104°F
• When not using the product for extended periods of time, charge its built-in rechargeable battery regularly (about every 3 months).
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion
• Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas
• Use only attachments/accessories/spare parts supplied or recommended by Creative
• Do not insert the earphones too deep into your ears and never insert them without ear adapters. Always remove the earphones slowly and carefully from your ears.
• Clean the product only with a soft, dry cloth.
• Do not dismantle or attempt to repair your product.
• Do not pierce, crush, or set fire to your product
• Keep your product away from strong magnetic objects
• Keep the product, accessories, and packaging parts out of reach of children and pets to prevent accidents. Swallowing and choking hazard.

Warning on Choking Hazard
This product and its accessories may contain small parts which must be kept away from children.
WARNING
CHOKING HAZARD-Small Parts Not for children under 3yrs.
The following sections contain notices for various countries.
CAUTION:
This product is intended for use with FCC/CE-certified computer equipment. Please check the equipment operating/installation manual and/or with the equipment manufacturer to verify/confirm if your equipment is suitable prior to the installation or use of the product.
Notice for the USA
Federal Communication Commission (FCC) Interference Statement
FCC Part 15: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if no installed and used in accordance with instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subjected to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device must be installed with computer equipment certified to comply with Class B limits.
All cables used to connect to the computer and peripherals must be shielded and grounded.
Operation with non-certified computers or non-shielded cables may result in interference to radio or television reception.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
Federal Communication Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Notice for Canada

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

This device complies with CAN ICES-003 (B)/NMB-003(B) and CAN RSS-216 / CNR-216.
Canada Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
MODIFICATION: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the device.
SUPPLIER’S DECLARATION OF CONFORMITY According to CFR Title 47 §2.1077

Importer’s Name:
Importer’s Address:| Creative Labs, Inc.
1901 McCarthy Boulevard
Milpitas, CA. 95035
Tel: (408)428-6600
---|---

declares under its sole responsibility that the product

Trade Name:
Model Numbers:
Product Name:| Creative
EF0930
Creative Outlier Pro
---|---

has been tested according to the FCC / CISPR22 requirement for Class B devices and found compliant with the following standards:
EMI/EMC: ANSI C63.4 & C63.10, FCC Part 15 Subpart B & C
Complies with Canadian ICES-003 Class B, RSS-247 & RSS-216 standards
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesirable operation.

Supplementary Information:| Thinh Bui Compliance Manager Creative Labs, Inc. 23 Jul 2021
---|---

European Compliance
This product complies with all applicable directives. A copy of the EU DoC is available at the Creative website.
CAUTION: To comply with the Europe CE requirement, this device must be installed with CE-certified computer equipment which meets Class B limits.
All cables used to connect this device must be shielded, grounded, and no longer than 3m in length. Operation with non-certified computers or incorrect cables may result in interference to other devices or undesired effects to the product.
MODIFICATION: Any changes or modifications not expressly approved by Creative Technology Limited or one of its affiliated companies could void the user’s warranty and guarantee rights.
The insulating coating on the device also serves the purpose of ESD protection.
Vietnam RoHS Statement

This product is in compliance with Circular 30/2011/TTBCT of the Ministry of Trade of the Socialist Republic of Vietnam (“Circular”), it does not contain the following substances in a concentration greater than the Maximum Limit value as specified in the Circular.

lead
Mercury
cadmium
hexavalent chromium
polybrominated biphenyls (PBB)
polybrominated diphenyl ethers (PBDE)| 1000
1000
100
1000
1000
1000

1. The maximum Limit does not apply to applications exempted from the Circular.
2. Maximum Limit refers to concentration by weight in homogeneous materials.

Notice for Australia
Notice for Malaysia

Notice for Singapore
Complies with IMDA standards
DA107311
Creative Outlier Pro (EF0930) Additional Safety and Regulatory information
Model No: EF0930
Earpiece model no. : EF0930 L, EF0930 R
Charging case model no.: EF0930 C
PN: 03EF093000000 Rev A

References

• Creative Labs (United States) | Sound Blaster Sound Cards, Super X-Fi, Speakers and Soundbars, Webcams, Headphones and Gaming Headsets
• Creative Labs (United Kingdom) | Sound Blaster, Gaming Headsets, Speakers, Headphones
• Creative Worldwide SupportCreative Outlier Pro
• Creative Technology - Declaration of Conformity
• Creative Worldwide Support
• Creative Worldwide Support - Creative Outlier Pro
• creative.com/warranty
• Creative Labs (United States) | Sound Blaster Sound Cards, Super X-Fi, Speakers and Soundbars, Webcams, Headphones and Gaming Headsets
• Creative Labs (United States) | Sound Blaster Sound Cards, Super X-Fi, Speakers and Soundbars, Webcams, Headphones and Gaming Headsets
• Creative Technology - Declaration of Conformity
• Creative Technology - Online Product Registration
• 小型充電式電池のリサイクル | 一般社団法人JBRC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>