ASPEN Creative 61136-11 Pendant Lamp Instruction Manual
- June 1, 2024
- ASPEN Creative
Table of Contents
ASPEN Creative 61136-11 Pendant Lamp
Specifications
- Product: Pendant Lamp
- Model: 61136-11
- Color: [Specify color options if applicable]
- Material: [Specify material]
- Dimensions: [Specify dimensions]
- Power Source: Electric
- Maximum Wattage: [Specify maximum wattage]
Assembly Instructions
- Thread 2 mounting screws properly into the relevant mounting holes pre-drilled on the cross bar.
- Attach the cross bar to outlet box using 2 outlet box screws upwards.
Wire Connections
- Identify the wires: white wire, black wire, outlet box wire.
- Use wire nuts to connect the white wire from the outlet box to the mounting screw on the cross bar.
- Connect the black wire from the outlet box to the canopy ball nut.
Frequently Asked Questions (FAQ):
Q: Can the height of the pendant lamp be adjusted?
A: Yes, the height of the pendant lamp can be adjusted during installation by
adjusting the length of the cord or chain.
ASSEMBLY INSTRUCTIONS
Pendant lamp – Model 61136-11
-
Thread 2 mounting screws properly into the relevant mounting holes pre-drilled on the cross bar.
-
Attach the cross bar to outlet box using 2 outlet box screws upwards.
-
Make wire connections:
- Attach ground wire to house ground wire using a wire nut or attach them to the cross bar with a green ground screw.
- Attach white wire from light to white wire from power source with a wire nut. –Attach black wire from light to black wire from power source with a wire nut.
Observing: positive wire with positive wire, negative wire with negative wire, ground wire with ground wire.
-
Tuck the wire connections neatly into the outlet box.
-
Attach the canopy to the ceiling and let the 2 mounting screws pass through the 2 pre-drilled holes on the canopy and fix it in place by ball nuts.
-
Install bulb.(not included) (Please do not exceed the maximum capacity which is recommended on the fixture.)
-
Turn on the power at fuse or circuit box.