MF8460 Creative Stage SE Mini User Guide

May 15, 2024
Creative

Creative - logo

STAGE SE MINIMF8460 Creative Stage SE Mini -

Quick Start Guide
Model No. : MF8460
PN: 03MF846000000 Rev B

OVERVIEW

MF8460 Creative Stage SE Mini - OVERVIEW

  1. Dual Custom-tuned Full-range Drivers
  2. LED Indicator
  3. 3.5 mm Headphone Output Port
  4. Multifunction Button (Bluetooth® Connectivity / Source Switching)
  5. Volume Knob
  6. Built-in Rear Port Tube
  7. USB-C Port (USB Power and USB Audio)

CONNECTIVITY

MF8460 Creative Stage SE Mini - CONNECTIVITY

CONTROLS

MF8460 Creative Stage SE Mini - CONTROLS

MASTER RESET

Press and hold the Multifunction button for 8 seconds to perform a Master Reset. Upon completion, a voice prompt will be triggered, “Reset To Factory Default”, and the soundbar will revert to its default state. Master Reset is reserved for cases where users encounter issues while the soundbar is in use or during situations such as: Bluetooth Pairing failure, random LED display blinks, or to reset all data.

TECHNICAL SPECIFICATIONS

Power Output: Up to 12W RMS, 24W Peak Power
Frequency Response: 68–20,000 Hz
SNR: ≥ 75 dB
Bluetooth Version: Bluetooth 5.3
Operating Frequency: 2402–2480 MHz
Operating Range: Up to 10m / 33 ft, measured in open space. Walls and structures may affect range of device
Maximum RF Output Power: 4 dBm
Supported Bluetooth Profiles:
· A2DP (Advanced Audio Distribution Profile),
· AVRCP (Audio / Video Remote Control Profile)
Supported Codecs: SBC
Soundbar Input rating: 5V 3.0 A
Maximum Operating Temperature: 45°C

OTHER INFORMATION

Please visit creative.com/compliance/StageSEmini
for the user guide, safety and regulatory information.
Please visit creative.com/support/StageSEmini for all other support related to your product.

FIRMWARE UPDATE

To update the firmware of Creative Stage SE mini, visit creative.com/support/StageSEmini. If an update is available, locate the firmware file on the Support page to download. A PC is required to perform this action. Once downloaded, copy the file onto an external USB drive and plug it into the USB-C port on the back of the soundbar.
Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Speaker, model no. MF8460 is in compliance with Directive 2014/53/EU and Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC.

PRODUCT REGISTRATION AND WARRANTY

Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register. Please note that your warranty rights are not dependent on registration.
Creative warrants the included Creative-branded hardware product (the “Product”) against defects in materials and workmanship (“Defect(s)”) for twelve (12) months (for the European Union, twenty-four (24) months (excluding all wear and tear), subject to certain exceptions as stated in the EU Directive 1999/44/EC) from the date of purchase. The Creative Limited Hardware Warranty (the “Warranty”) does not cover (but not limited to) consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time; normal wear and tear, accidents or misuse. You must provide Creative proof of original purchase of the Product by a dated itemized receipt to be eligible for the Warranty. If a Defect arises and a valid claim is received during the applicable Warranty Period, Creative will at its sole option, service the Product at no charge using new or refurbished replacement parts at our sole discretion. Warranty benefits are in addition to rights provided under local consumer laws.
For Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods. [Address: Creative Technology Ltd, 31 International Business Park, #03-01, Singapore 609921. Telephone: +65 6895 4101 (standard international call charges apply.)]

For the full terms and detailed information on the Warranty, please visit creative.com/compliance/StageSEmini, or scan the QR code.

A printed copy is available upon request to Creative Labs, Inc., 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035.
The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchase the product.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Creative User Manuals

Related Manuals