CREATIVE Aurvana Ace 2 True Wireless Bluetooth Earbuds User Guide

CREATIVE Aurvana Ace 2 True Wireless Bluetooth Earbuds

OVERVIEW

1. Earbud LED Indicator
2. Charging Case LED Indicator
3. USB-C Charging Port
4. Multifunction Button
   • Manual Bluetooth Pairing
   • Master Reset

BATTERY INDICATOR

1. Charging Case’s Battery Level
2. Battery Charge Level Indicator
3. Earbuds Charge Level

CONTROLS

1. Powering On / Off
   Power on/off the earbuds while out of its charging case.

2. Call Mode

3. Playback Mode

CHARGING CREATIVE AURVANA ACE 2 WIRELESSLY

Note: Earbuds cannot be charged wirelesslf” without its charging case.

Wireless charging pad not included

MASTER RESET

With both earbuds placed in an open charging case, press and hold the multifunction button on the charging case far 8 seconds to perform a Master Reset. The charging case’s LED indicator will flash blue upon completion.

UNICAST MODE (LC3)
Unicast mode lets the user wirelessly connect to a compatible Bluetooth LE audio receiver to enjoy high-definition audio streaming on a one-to-one basis.

COMMON CONNECTIVITY ISSUES
This article highlights a phenomena and recommendation for music cutting out and earbuds that do not stay connected. When pairing a smart mobile device with the earbuds, the signal is strongest when there is a line-of-sight between the pairing devices.
If the signal passes through the body, which is mostly made up of water fluid, it may get absorbed, which may result in pairing difficulty. If the mobile device is already connected to the earbuds,it may result in signal lost or the earbuds may get disconnected.

BLUETOOTH® PAIRING

1. First-time Pairing
2. Pairing A New Device

TECHNICAL SPECIFICATIONS

Headphone Drivers

• XMEMS with 10 mm Dynamic
  Drivers (per earbud)

• Frequency Response:
  5-40,000 Hz

Audio Codecs

• LC3
• aptX Lossless
• aptX Adaptive
• aptx
• AAC
• SBC

Bluetooth version

• Bluetooth 5.3

Bluetooth Operating Frequency

• 2402-2480 MHz

Wireless Operating Range

• Up to 10m / 33 ft measured in open space. Walls and structures may affect range of device

Maximum RF Output Power

• 8 dBm

IP Rating

• IPX5 (Earbuds only)

Operating Temperature

• 0-45°C

• Playtime^

• Up to 6 hours per charge

• Up to 24 hours of total
  playtime
  Battery

• Earbuds (Left and Right):

Lithium-ion button battery:
3.7V 52 mAh 0.192 Wh

• Battery Charging Case:
  Lithium-ion polymer battery:
  3.7V 470 mAh 1.739 Wh

Charging Time

• < 2 hours

Charging Interface

• Qi-compatible wireless charging
• USB-C (Charging only)

Input Rating

• 5V === 1A

Voice Assistant Support

• Siri
• Google Assistant

Based on moderate volume level with ANC off. Actual battery life will vary with use, settings, songs, and environmental conditions

Note:
Compliance markings are located on the back of the product

Important Safety Instructions. Do not listen to audio on your earphones or headphones at high volume for prolonged periods of time as hearing loss may result.

Hereby, Creative Labs Pte. Ltd. declares the 8/uetooth headset, model no. EF1160 is in compliance with Directive 2014153/EU and Radio Equipment Regulations 2017. The full text of the EU and UK declaration of conformity is available at http://www.creative.com/EUDoC.

Waste Electrical and Electronic Equipment (WEEE) Symbol
The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider or the shop where you purchased the product.

BATTERIES DIRECTIVE

FOR REMOVABLE BATTERY (Li-ion/polymer, button/coin cells,cylindrical cells)
This product contains one or more of the above removable batteries.
The crossed-out wheeled bin symbol indicates that the battery in this product should not be treated as unsorted municipal waste upon reaching its end of life. Instead it should be taken to separate collection and recycling schemes. Batteries containing heavy metal content will have a two-letter symbol for the chemical under the crossed-out wheeled bin symbol. ‘Cd’ stands for cadmium, ‘Pb’ for lead, and ‘Hg for mercury. You can help the environment and avoid public health hazards by recycling the battery at an authorized recycling facility or the place of purchase. To find the nearest authorized recycle centre contact your local authority. Instructions for removing the battery can be found in the product user manual. The instructions should be followed carefully before attempting to remove the battery.

FOR INTEGRATED BATTERY
This product contains a Lithium-ion/polymer battery that should only be removed by an authorized recycling centre. By recycling this product at your local authorized recycling centre or the place of purchase, the battery will be removed and recycled separately.

OTHER INFORMATION
Please visit creative.com/compliance/AurvanaAce2 for the user guide,safety and regulatory information and battery removal instruction, which is meant strictly for independently qualified professional.
Please visit creative.com/support/AurvanaAce2 for all other support related to your product.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>