CREATIVE MF8465 Bluetooth Speaker User Guide

ELITE SCREENS VMAX 3 Series Electric Projection Screen

Product Information

Specifications

• Model: MF8465
• Power: 5V 3A
• Manufacturer: Creative Labs Pte. Ltd.

Product Usage Instructions

Controls Overview

• The product features various controls including SuperWideTM Button, RGB Button, Volume Knob, and different LED indicators for Power, USB Audio, Bluetooth, and AUX Input.

Power On/Off

• To power on the device, press the Source Color button. To power off, press and hold until the LED indicator shows Solid Red.

Audio Sources

• Select between USB Audio (Solid Purple), Bluetooth (Solid Blue), and AUX Input (Solid Green) by pressing the corresponding buttons.

Bluetooth Pairing

• For Bluetooth pairing, enable Bluetooth mode on your device and press the Bluetooth Pairing button on the speaker. The LED will blink blue during pairing and show a solid blue light when paired successfully.

Brightness Control

• Enter Brightness Control Mode by pressing the corresponding button. Adjust brightness levels with the Brightness Control button. Exit by pressing the button again.

Master Reset

• To perform a Master Reset, press and hold the Multifunction button for 8 seconds. A voice prompt will confirm the reset.

Firmware Update

• If a firmware update is available, visit creative.com/support/SBGS3 to download the file. Connect the speaker to a PC for updating.

Other Information

• For additional user guides, safety, regulatory information, and support, visit creative.com/compliance/SBGS3 and creative.com/support/SBGS3 respectively.

Product Registration and Warranty

• For warranty details, visit creative.com/compliance/SBGS3 or scan the QR code. Printed copies are available upon request to Creative Labs, Inc., 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035.

FAQ

Where can I find compliance information?

• You can find compliance information at creative.com/compliance/SBGS3 for detailed regulatory information.

How do I perform a Master Reset?

• To perform a Master Reset, press and hold the Multifunction button for 8 seconds until a voice prompt confirms the reset.

OVERVIEW

1. RGB Lighting
2. LED Indicator
3. Multifunction Button (Bluetooth® Connectivity / Source Switching)
4. SuperWide™ Button
5. RGB Button
6. Volume Knob
7. 3.5 mm Headphone Output Port
8. USB-C Port (Power and Audio)
9. 3.5 mm AUX Input Port

CONNECTIVITY

CONTROLS

MASTER RESET

Press and hold the Multifunction button for 8 seconds to perform Master Reset. Upon completion, a voice prompt will be triggered, “Reset To Factory Default”, and the soundbar will revert to its default state.

FIRMWARE UPDATE

• If an update is available, visit creative.com/support/SBGS3 to download the firmware file.
• A PC is required to perform this action.

TECHNICAL SPECIFICATIONS

• Bluetooth Version: Bluetooth 5.4
• Operating Frequency: 2402–2480 MHz
• Operating Range: Up to 10m / 33 ft, measured in open space. Walls and structures may affect a range of device
• Maximum RF Output Power: 9 dBm
• Soundbar Input rating: 5 V 3A
• Maximum Operating Temperature: 45°C
• Note: Compliance markings are located at the bottom of the product

OTHER INFORMATION

• Please visit creative.com/compliance/SBGS3 for the user guide, safety, and regulatory information.
• Please visit creative.com/support/SBGS3 for all other support related to your product.
• Hereby, Creative Labs Pte. Ltd. declares the Bluetooth Speaker, model no. MF8465 complies with Directive 2014/53/EU and Radio Equipment Regulations 2017.
• The full text of the EU and UK Declaration of Conformity is available at http://www.creative.com/EUDoC.

PRODUCT REGISTRATION AND WARRANTY

• Registering your product ensures you receive the most appropriate service and product support available. You can register your product at creative.com/register. Please note that your warranty rights are not dependent on registration.
• Creative warrants the included Creative-branded hardware product (the “Product”) against defects in materials and workmanship (“Defect(s)”) for twelve (12) months (for the European Union, twenty-four (24) months (excluding all wear and tear), subject to certain exceptions as stated in the EU Directive 1999/44/EC) from the date of purchase. The Creative Limited Hardware Warranty (the “Warranty”) does not cover (but is not limited to) consumable parts, such as batteries or protective coatings that, due to their nature, tend to diminish over time; normal wear and tear, accidents or misuse. You must provide Creative proof of original purchase of the Product by a dated itemized receipt to be eligible for the Warranty.
• If a Defect arises and a valid claim is received during the applicable Warranty Period, Creative will at its sole option, service the Product at no charge using new or refurbished replacement parts at our sole discretion.
• Warranty benefits are in addition to rights provided under local consumer laws.
• For Australia only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
• You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage.
• You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
• Goods presented for repair may be replaced by refurbished goods of the same type rather than being repaired. Refurbished parts may be used to repair the goods.
• [Address: Creative Technology Ltd, 31 International Business Park, #03-01, Singapore 609921. Telephone: +65 6895 4101 (standard international call charges apply.)
• For the full terms and detailed information on the Warranty, please visit creative.com/compliance/SBGS3, or scan the QR code. A printed copy is available upon request to Creative Labs, Inc., 1900 McCarthy Boulevard, Suite 103, Milpitas, CA 95035.
• ©2023 Creative Technology Ltd. All rights reserved. Creative, the Creative logo, Sound Blaster, and Blaster are trademarks or registered trademarks of Creative Technology Ltd in the United States and/or other countries.
• The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. Any use of such marks by Creative Technology Ltd is under license.
• All other trademarks are the property of their respective owners and are hereby recognized as such. All specifications are subject to change without notice.
• The actual product may differ slightly from the images shown. Use of this product is subject to a limited warranty.
• The use of the WEEE Symbol indicates that this product may not be treated as household waste. By ensuring this product is disposed of correctly, you will help protect the environment.
• For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchase the product.
• REGISTER YOUR PRODUCTwww.creative.com/register
• TECHNICAL SUPPORTwww.creative.com/support

References

• Creative Labs (United Kingdom) | Sound Blaster, Gaming Headsets, Speakers, Headphones
• Creative Worldwide Support
• Creative Technology - Declaration of Conformity
• Creative Technology - Online Product Registration
• Creative Labs (United States) | Sound Blaster Sound Cards, Super X-Fi, Speakers and Soundbars, Webcams, Headphones and Gaming Headsets
• Creative Technology - Declaration of Conformity
• Creative Technology - Online Product Registration
• Creative Worldwide Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>