Danby DAR110A1TDD Refrigerator Owner’s Manual

: June 5, 2024
: Danby

Table of Contents

**** Important Safety Information
OPERATING INSTRUCTIONS
CARE & MAINTENANCE
FREQUENTLY ASKED QUESTIONS
TROUBLESHOOTING
Documents / Resources

Do the right thnig.
Designer
OWNER’S MANUAL
MODEL
DAR110A1TDD

Welcome to the Danby family.
We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains
important operation information, safety information, troubleshooting, and maintenance tips to ensure the reliability and longevity of your appliance.
You are entitled to the warranty coverage as described in the owner’s manual provided with your new appliance.

Please write down your appliance information below. You must keep the original proof of purchase receipt to validate and receive warranty services.
Register your product online and receive a FREE 2 MONTH WARRANTY EXTENSION after ﬁ lling out a product survey, at www.danby.com/support/product-registration/

Model Number: ____
Serial Number: ____
Date of Purchase: __

Need Help?

Read your Owner’s Manual for installation help, troubleshooting, and maintenance assistance.
Visit www.Danby.com to access self-service tools, FAQs and much more by searching your model number in the search bar.
For the Quickest Customer Service, please ﬁ ll out the web form at www.danby.com/support. Your submission will go directly to an expert on your particular appliance. Our average response times are between 20 minutes and 2 hours, during EST business hours.
Call 1-800-263-2629 – please note that during peak hours, hold times can exceed one hour.

**** Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS
DANGER: Risk of ﬁ re or explosion. The flammable refrigerant used. Do not puncture refrigerant tubing.

Do not use mechanical devices to defrost the refrigerator.
Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.
If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualiﬁ ed person in order to avoid hazards.
Consult repair manual or owner’s guide before attempting to service this product. All safety precautions must be followed.
Dispose of properly in accordance with federal or local regulations.
Follow handling instructions carefully.
Do not store explosive substances such as aerosol cans with a ﬂ ammable propellant in this appliance.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
CAUTION: Children should be supervised to ensure that they do not play with the appliance.
DANGER: Risk of child entrapment. Before throwing away an old appliance:

Remove the door or lid.
Leave shelves in place so that children may not easily climb inside.

DANGER: Do not add a lock to the door or lid. This can cause child entrapment and harm.

SAFETY REQUIREMENTS
This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.
This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, ofﬁ ces and other working environments;
Farm houses and by clients in hotels, motels and other residential type environments;
Bed and breakfast type environments;
Catering and similar non-retail applications.

GROUNDING INSTRUCTIONS
This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.
This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded.
If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.
WARNING – Improper use of the grounding plug can result in a risk of electric shock. Consult a qualiﬁ ed electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.
Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord.
Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.
SAVE THESE INSTRUCTIONS!

OPERATING INSTRUCTIONS

LOCATION

Two people should be used when moving the appliance.
Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm wet cloth.
Place the appliance on a ﬂ oor that is strong enough to support it when it is fully loaded.
Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption.
Extreme cold ambient temperatures may also cause the appliance to perform improperly.
Do not use the appliance near water, for example in a wet basement or near a sink.
This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).
Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
This appliance is 60.8 cm (23.9 inches) wide by 149.3 cm (58.8 inches) high by 63 cm (24.8 inches) deep.
Allow 12.7 cm (5 inches) of space between the back, sides and top of the appliance and all adjacent walls.
This appliance is intended for free-standing installation only and is not intended to be built into a cabinet or counter. Building in this appliance can cause it to malfunction.

FEATURES

Thermostat dial
Glass shelves
Crisper
Magnetic gasket: Tight ﬁ tting door seal keeps all the cooling power locked inside.
Bottle rack: For tall, small and medium cans or jars.
Adjustable feet: Adjust so the unit is level.

LEVELING INSTRUCTIONS
There are two adjustable feet on the bottom of the appliance that can be turned up or down to ensure that the appliance is level.

Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of the cabinet.
Slowly turn the leveling leg clockwise until the appliance is level.

TEMPERATURE SELECTION
The temperature of the appliance can be adjusted by turning the thermostat dial on inner right side of the cabinet.

The number 1 is the warmest setting. Higher numbers indicate colder settings.
The MAX position is the coldest setting.
The “Off” position will turn off the cooling function.
Internal temperature of the appliance can vary based on ambient temperature, the quantity of items stored and how frequently the door is opened.

DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.

Remove the adjustable foot from the lower left side of the cabinet. Remove the adjustable foot and lower hinge from the lower right side of the cabinet.
Remove the door from the cabinet. Remove the hole cover from the top left side of the door and install it in the hole on the top right side of the door.
Remove the hinge pin from the top right side of the worktop and install it on the top left side of the worktop.
Install the door on the cabinet. Install the adjustable foot on the lower right side of the cabinet. Install the adjustable foot and lower hinge on the lower left side of the cabinet. Ensure that the top of the door is level with the top of the cabinet and that the rubber gasket is making good contact before tightening the lower hinge screws.

CARE & MAINTENANCE

CLEANING
Ensure the appliance is unplugged before cleaning.

To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or a mild soap solution or some mild detergent.
Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth.
Clean the outside with a soft, damp cloth and some mild detergent.
It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.

Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.
POWER FAILURE
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if you minimize the number of times the door is opened. If the power is going to be off for a longer period of time, take the proper steps to protect your contents.
Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been interrupted.
DEFROST
This appliance is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.
VACATION

Short vacations: Leave the appliance operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all items and turn off the appliance. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.

MOVING

Make sure the appliance is empty.
Secure the shelves with tape.
Secure the door with tape.
Turn the adjustable foot up to the base to avoid damage.
Protect the outside of the appliance with a blanket or similar item.
Be sure the appliance stays in the upright position during transportation.
If the appliance is placed on its back or side during transportation, upon reaching the destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal components.

DISPOSAL
This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government ofﬁce.

FREQUENTLY ASKED QUESTIONS

What are the standard wattage and amps used?
This information can be found on the rating plate located on the back of the cabinet.
How much does it cost to run the freezer?
Please refer to the energy guide.
Can I use an extension cord?
No, an extension cord may not be used.
I am having trouble opening the door; why?
The refrigerator door may be difﬁ cult to open immediately after closing it. This is normal and is due to the pressure difference between the cold interior of the refrigerator and the warm air that has just entered the refrigerator when it was opened. The pressure will equalize within a few minutes.
I had my fridge on its side to bring it home. Do I have to let it sit? And for how long?
Yes, please allow it to sit upright for 6 hours before plugging it in.
The refrigerator smells like new plastic. How do I make it go away?
It is common for new appliances to have a slight plastic smell. Ensure that you have removed all packing material from the fridge. Clean the inside of the cabinet by following the cleaning instructions included in the owner’s manual. Once completed, place an open box of baking soda in the refrigerator to absorb any remaining odour.
How do I set the temperature?
This varies based on model:

If your thermostat dial has a graduated blue line, the thinner part of the line indicates warmer temperatures and the thicker part of the line indicates colder temperatures
If your thermostat dial has dots, the smaller dots indicate warmer temperatures and the larger dots indicate colder temperatures
If your thermostat dial has numbers, the smaller numbers indicate warmer temperatures and the larger numbers indicate colder temperatures

TROUBLESHOOTING

No power

A fuse may be blown or the circuit breaker tripped
Plug not fully inserted into the wall outlet

Internal temperature not cold enough

The temperature setting is too warm
The door is not shut properly or opened excessively
Recently added a large quantity of warm food to the cabinet
Close proximity to heat source or direct sunlight
Ambient temperature or humidity is very high

Refrigerator runs continuously

The temperature setting is too cold
The door is not shut properly or opened excessively
Recently added a large quantity of warm food to the cabinet
Close proximity to heat source or direct sunlight
Ambient temperature or humidity is very high

The refrigerator makes a gurgling noise when operating

This noise is completely normal. The refrigerant inside the appliance will make a gurgling noise as it changes from a liquid to a gas and back again.

LIMITED “IN-HOME” WARRANTY
This quality product is warranted to be free from the manufacturer’s defects in material and workmanship, provided that the unit is used under the normal operating conditions intended by the manufacturer.
This warranty is available only to the person to whom the unit was originally sold by Danby Products Limited (Canada) or Danby
Products Inc. (U.S.A.) (hereafter “Danby”) or by an authorized distributor of Danby, and is non-transferable.
TERMS OF WARRANTY
Plastic parts are warranted for thirty (30) days from the date of purchase, with no extensions provided.

First 18 months?| During the first eighteen (18) months, any functional ports of this product found to be defective will be repaired or replaced, at warrantor’s option, at no charge to the original purchaser.
---|---
1 To obtain service?| Contact the deoler where the unit wos purchased, or contact the nearest authorized Danby service depot, where service must be performed by a qualified service technician. If service is performed on the unit by anyone other than on the authorized service depot, all obligations of Danby under this warranty shall be void
.1 Boundaries of in-home service| . Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an authorized service depot. Any appliance requiring service outside the limited boundaries of “in Home Service’, will be the consumer’s responsibility to transport at their own expense to the original point of purchase or a service depot for repair. If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center, it must be delivered to the nearest authorized Danby Service Depot by the purchaser.
Transportation charges to and from the service location are not protected by this warranty and are the responsibility of the purchaser.

EXCLUSIONS
Save as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or statute is hereby expressly excluded. Save as herein provided, Danby shall not be responsible for any damages to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of the unit and by the purchase of the unit, the purchaser does hereby agree to indemnify anc hold harmless Danby from any claim for damages to persons or property caused by the unit.
GENERAL PROVISIONS
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:

Power failure.
Damage in transit or when moving the appliance.
Improper power supply such os low voltage, defective house wiring inadequate fuses.
Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating conditions Re. extremely high or low room temperature).
Use for commercial or industrial purposes (ie. If the appliance is not instilled in o domestic residence).
Fire, water damage, theft, war, riot, hostility, acts of God such as hurricanes, floods etc.
Service calls resulting in customer education.
Improper Installation (ie. Building-in of o freestanding appliance or using an appliance outdoors that is not approved for outdoor application, including but not limited to: garages, patios, porches or anywhere that is not properly insulated or climate-controlled).
Proof of purchase date will be required for warranty claims; retain bills of sale. In the event that warranty service is required, present the proof of purchase to our authorized service depot.

www.Danby.com

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
Warranty Service
In-Home
1 Don r by Products limited
PO Box 1778, Guelph °Nano Conodo N I H 6Z9
Telephone: (5191837:0920 FAX: : (519) 8370449
1-800-263-2629 04/17
Denby Products Inc.
PO Box 669. Findlay, Ohio,
U.S.A. 45840 Telephone: 1419).425-8627 FAX: (41914258629
NOTE
*Trademarks of Danby Products Limited and/or its subsidiaries Printed in China