Creative Labs EF1100 Creative Zen Air Plus User Guide

Creative Labs EF1100 Creative Zen Air Plus User Guide

OVERVIEW

1. Touch Control Panel
2. Battery LED Indicator
3. USB-C Charging Port
4. Charging Case Function Button

Battery LED indicator

When charging case is closed with earbuds inside, the charging case LED indicator will display the earbuds battery level. The LED indicator will blink green once and the following LED behavior will be observed:

Glowing Yellow
Glowing GreenSolid
Green for 20s before turning off

When charging case is open with earbuds outside, the charging case LED indicator will display the charging case battery level. The following LED behavior will be observed:

0-30%
31-70%
71-100%| Solid Red
Solid Yellow
Solid Green
LED indicator will show for 20s before turning off

When user connect the USB-C cable to the charging case, the following LED behavior is observed:

0-30%
31-70%
71-100%
Full battery| Glowing Red
Glowing Yellow
Glowing Green
LED indicator will stay on until USB-C chargingcable is removed

CONTROLS

• Power ON earbuds

Press and hold 6sLeft / Right Earbud Touch Panel|

• Power OFF earbuds

Bluetooth|
Place earbuds in charging case with lid openPress and hold 3s charging casefunction button|

• Manually initiate Bluetooth pairing

During Playback|
2x pressRight Earbud Touch Panel|

• Play and Pause Music

3x pressRight Earbud Touch Panel|

• Next Track

Long pressRight Earbud Touch Panel|

• Gradually increase volume level

Long PressLeft Earbud Touch Panel|

• Gradually decrease volume level

Noise Control & Voice assistant|
2x pressLeft Earbud Touch Panel|

• Toggle between different sound modes
• Sequence of modes: ANC OFF (Default) > Ambient mode > Active Noise Cancellation (ANC) ON

3x pressLeft Earbud Touch Panel|

• Activate & Deactivate Voice Assistant

Incoming Calls|
2x pressLeft / Right Earbud Touch Panel|

• Pick up incoming calls

Long pressLeft / Right Earbud Touch Panel|

• Reject incoming calls

Outgoing Calls|
2x pressLeft / Right Earbud Touch Panel|

• Cancel outgoing calls

During Calls|
2x pressLeft / Right Earbud Touch Panel|

• Hang up call

Master Reset

While earbuds are placed within charging case, press and hold charging case function button for 8s to initiate master reset. Charging case LED indicator will flash red 5 times and turn off upon completion.

Master Reset is reserved for cases where users encounter issues while earbuds are in use or during situations such as: Bluetooth Pairing failure, failure to pair secondary earbud with the main earbud, or to reset all data.

TECHNICAL SPECIFICATIONS

• Bluetooth Version: Bluetooth 5.3

• Bluetooth Profiles:
  A2DP (Advanced Audio Distribution Profile)
  AVRCP (Audio / Video Remote Control Profile)
  HFP (Hands-free profile)

• Wireless Operating Range: Up to 10m / 33 ft measured in open space. Walls and structures will affect range of device.

• RF Output Power: TBC dBm

• Operating Frequency: 2402–2480 MHz

• Input Rating: 5V⎓1A

• Operating Temperature: 0–45°C

• Ingress Protection: IPX4 (Earbuds)

• Earbuds Battery (Left and Right): 3.7V 40mAh 0.148Wh Lithium-ion button battery

• Charging Case Battery: Lithium-ion polymer battery: 3.7V 430 mAh 1.591 Wh

Note: Compliance marking are located at the bottom of the product.

Operating frequency for China translation only;

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>