AIOTO GO Smartest 4G-LTE Mobile Security Camera User Guide
- June 5, 2024
- AIOTO
Table of Contents
AIOTO GO
Quick Start Guide
What is the box
LED indicator
| The camera is registered and is connected to the mobile network| | The
battery has been charged to 100%
---|---|---|---
| The camera is connecting to the mobile network| | The battery is charging
| The camera is starting up| | The SD card type is invalid
| The SIM card has not been inserted, is damaged or is not active. It has
failed to connect to the mobile network| | The camera is receiving a firmware
update
General Introduction
How to set up the camera?
-
Activate the SIM card
( Please skip to the next step if a SIM card is included. )
• Activate the SIM card through your smart-phone or any other device before inserting it into your camera
• If the SIM card has a PIN code, please use your smartphone to disable the PIN code
• Make sure the SIM card works on your smartphone before inserting it into the camera -
**Insert the SIM card and Micro SD card** • Insert the SIM card and a Micro SD card into the camera before powering it upA Micro SD card is required to set up the camera.
-
Activate the camera
| Steps | LED indicator |
|---|
After inserting the SIM card and Micro SD card, please press the power key for
2 sec then release it to power up the camera.| Blinking red light
After the camera is powered up, the camera will automatically connect to the
mobile network| Blinking blue light
If the camera is successfully registered and connected to the mobile network,
the LED indicator will turn solid blue| Solid blue light
If the camera fails to register and connect to the mobile network, the LED
indicator will turn solid red| Solid red light
- **Pair the camera with the AIOTO app
• Get the AIOTO app
• Create a new account
• Scan the QR code on the camera and the pairing is done!
- Place the camera and it’s ready to go!
• Keep the active location in the camera’s field of view
• The suggested viewing distance is 2-10 meters
• Please install the camera angularly ( the angle of depression is larger than 10° ) for effective motion detection.
How to charge the camera?
-
You can charge the camera by using the power adapter or the AIOTO Solar Panel. When connecting the camera to the power adapter or the AIOTO Solar Panel, the LED indicator on the camera will blink green for 1 minute. The LED indicator will then become solid green when the battery is fully charged.
-
The included power adaptor
-
Buy additional AIOTO Solar Panel accessories to get a long-lasting power supply.
-
The AIOTO solar panel is NOT included in the box.
How to install the wall mount?
- Screw the wall mount into the wall
- Screw the camera to the wall mount and adjust the camera to the proper direction.
IMPORTANT PRODUCT INFORMATION
Use Responsibly. Read all instructions and safety information before use.
FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS COULD RESULT IN FIRE, ELECTRIC SHOCK, OR OTHER INJURY OR DAMAGE.
- Please charge the camera with a standard and high-quality DC 5V battery charger.
- If you want to charge the AIOTO Go camera via the solar panel, please note that the camera is ONLY compatible with AIOTO solar panel. You cannot charge the camera with another solar panel
- Please make sure to charge the battery in temperatures between 0°C and 45°C.
- Please keep the USB charging port dry, clean, and free of any debris.
- Please cover the USB charging port with the rubber plug after the battery has been fully charged.
- Never charge, use or store the AIOTO Go camera near any ignition sources or hazardous objects, such as fire or heaters…etc.
- Do not force the power adapter Into a power outlet.
- Do not expose the power adapter or its cable to liquids
- If the power adapter or cable appears damaged, discontinue use immediately.
- To avoid the risk of electric shock, do not touch your device or any wires connected to your device during a lightning storm.
AIOTO Go is not designed for 24/7 full capacity running or around-the-clock
live view streaming. It’s designed to record motion events and remotely Ilve
view streaming only when you need It.
FCC warning
Federal Communications Commission Statement
This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by doing one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user`s authority to operate the equipment. The
antenna(s) used for this transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Radiation Exposure Statement
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
Contact us
Learn more about us
https://aiototech.com
Scan to review the FAQ
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>