cudy LT18 4G LTE Dual Band WiFi 6 Gigabit Cellular Hotspot Router Installation Guide
- June 3, 2024
- cudy
Table of Contents
**LT18 4G LTE Dual Band WiFi 6 Gigabit Cellular Hotspot Router Installation Guide
**
GNU General Public License Notice
The software code in this product was created by third parties and is licensed
under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in
this context refers to the Cudy entity offering respective software for
download or being in charge of the distribution of products that contain
respective code) makes the corresponding GPL source code available upon
request via the official website, either independently or with the assistance
of third parties (such as Shenzhen Cudy Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com. In addition, Cudy offers a
GPL-Code-Centre under https://www.cudy.com/gplcodecenterdownload where users
can get the GPL source codes used in Cudy products for free. Please note, that
the GPL-Code-Centre is only provided as a courtesy to Cudy’s customers but may
neither offer a full set of source codes used in all products nor always
provide the latest or actual version of such source codes. The GPL code used
in this product is subject to the copyrights of one or more authors and is
supplied WITHOUT ANY WARRANTY.
Quick Installation
-
Install the cellular antennas.
-
With the gold contacts facing down, gently slide the nano SIM card into the SIM1 slot until you hear a click sound.
Note 1:
The router doesn’t support SIM hot-swapping. You need insert or remove the SIM card while the router is powered off, otherwise they may get damaged.
Note 2:
If both SIM1 and SIM2 card slots are inserted with SIM cards, the router will automatically choose which SIM card to use. Since the automatic selection mechanism is time-consuming, it is highly recommended to insert only one SIM card when using for the first time -
Connect the power adapter to the router
-
Turn on the router. Waiting 2~5 minutes for it to start.
-
Check the status of the LED.
When the LED turns solid blue or purple, it means the router is connected to the cellular network.
If the LED turns to solid red, please follow the instructions of Customize the Router.
Note:
For some ISP’s SIM card (such as Verizon), it may take longer to connect to
the Internet. Please kindly wait another 2~5 minutes.
Customize The Router
-
Connect the router via Ethernet cable or Wi-Fi. Network name and password is printed on the bottom of the router.
-
Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as password to login.
-
The page below would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet.
-
Then please check cellular information card of the status page. If the status is connected, it means the internet connection is successful.
Connected
Not connected -
If the Internet is not connected, or you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router.
Note: -
If you are not sure about APN parameters, please contact your internet provider.
-
If you meet any other problems, don’t hesitate to contact our technical support team: support@cudy.com
-
Frequently Asked Questions: https://www.cudy.com/faq
Enjoy the internet!**** LED and Button
Name | Status | 4G Model | 5G Mode |
---|---|---|---|
Off | Not powered on | ||
Flash | System startup process or upgrade process | ||
Solid | System startup is complete | ||
Off | Not powered on | ||
Red | No internet connection | ||
Purple | 2G/3G | 2G/3G/4G | |
Blue | 4G or WAN connected | 5G or WAN connected | |
Off | Wi-Fi is disabled | ||
Flash | WPS pairing | ||
Solid | Wi-Fi is enabled | ||
Off | Not detect the SIM card | ||
Red | Not connected to Cellular network | ||
Purple | Signal is average | ||
Blue | Signal is strong | ||
LAN LED | off | No connection | |
on | Connected | ||
Button | Power | Press for “Power ON”, bounce for “Power OFF“ | |
WPS | Press to take effect. | ||
Reset | Press and hold it for over 2 seconds until all LED lights flashing 3 |
times to reset the router to default settings.
How to upgrade firmware?
-
Download the latest firmware from https://www.cudy.com/download
-
Unzip the file you download
-
Connect to Cudy’s network via WiFi or Ethernet.
-
Open a web browser and go to http://cudy.net/ or http://192.168.10.1/
-
Log into the web management page.
-
Click Advanced Settings -> Firmware.
-
Choose the firmware you unzipped to upload.
-
Waiting 2~5 minutes for the router to restart.
-
Done
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirementsand other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity can be found at http://www.cudy.com/ce.
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste. Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.
FCC Statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Email:
support@cudy.com
Driver & Manual:
www.cudy.com/download
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>