cudy X6 AX1800 1800mbps Dual Band Smart Wi-Fi 6 Router Installation Guide
- June 3, 2024
- cudy
Table of Contents
cudy X6 AX1800 1800mbps Dual Band Smart Wi-Fi 6 Router Installation Guide
-
Turn off the modem and remove the battery if it has one
-
Connect router’s INTERNET Port to DSL/Cable Modem/Ethernet
-
Turn on the modem and wait about 2 minutes for it to restart
-
Connect the power adapter to the router, and wait 1 minute until the system LED changes from flashing to solid on (red or blue) , which means that the system startup is completed.
-
Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an Ethernet cable.
Wireless
Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router. -
Launch a web browser and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for password to log in.
-
Then below popup will appear, please follow step by step instructions to set up the internet connections.
Q1: What can I do if the login window does not appear?
A1: If the computer is set to a static IP address, change its settings to
obtain an IP address and DNS server address automatically.
A2: Verify that http://cudy.net/ or 192.168.10.1 is correctly entered
in the web browser .
A3: Use another web browser and try again.
A4 : Reboot your router and try again.
A5: Disable and then enable the network adapter being used.
Q2: What should I do if i can not find Wi-Fi signal?
A: Please make sure the router is connected, power and broadband interface has
no loose. If everything is normal but still no signal, please try to use
computer to set, or restore the router to factory settings. If after restoring
factory settings but still no signal, you can restart the router. If the issue
remains, the router maybe faulty.
Q3: How to Reset to defaults?
A: With the power on, press and hold the RST/WPS button for about 6 seconds to
reset the router to its factory default settings.
Q4: Why can’t my mobile phone enter the Setting Page of Router?
A: Please make sure your mobile phone is connected to the Cudy Router Wi-
Fi(default name is printed on the buttom of router), and make sure you enter
the right site in the browser. (Please follow instructions FAQ -> Q1)
Q5: Why can’t I enter the setting page after restarting the Router?
A: After restarting the Router, your phone or computer maybe connect
automatically to other Wi-Fi, please make sure your phone or computer is
connected to Cudy Router Wi-Fi. (default name is printed on the bottom of
router)
FCC Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and 2015/863/EU. The original EU declaration of conformity may be found at http://www.cudy.com/ce.
Support
For technical support the user guide and more information,
please visit: http://www.cudy.com/support
support@cudy.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>