cudy R700 Gigabit Multi-WAN VPN Router Installation Guide
- June 3, 2024
- cudy
Table of Contents
R700 Gigabit Multi-WAN VPN Router
Installation Guide
Connection
Need help?
Email:support@cudy.com
Driver &
Manual:www.cudy.com/download
-
Connect a computer to the LAN port of the router with an RJ45 cable properly. If your computer is configured with a fixed IP, change it to Obtain an IP address automatically.
-
Launch a web browser, and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for password to log in.
Note: If the login window does not appear, please refer to FAQ > Q1. -
After a successful login, you can configure the function by clicking the menu on the top of the screen.
Configure WAN/LAN Ports: General Settings -> WAN Mode
Setup Internet Connection: General Settings -> WAN Settings
Setup VPN Parameters: General Settings -> VPN
Note: If the login window does not appear, please refer to FAQ > Q1.
Enjoy the internet!
LED and Button
| Name | Indication |
|---|---|
| Power | On: Power on |
Off: Power off
System| Blinking slowly: System startup process
Blinking fast: Factory reset process
Steady on: System startup is complete
Link/Act| On: Connecting to a device but no activity
Off: No device connected to the corresponding port
Blinking: Transmitting or receiving data
Reset| Press and hold 6 seconds to reset the router to its factory default
settings.
Support
For technical support, the user guide and more information,
please visit: http://www.cudy.com/support
support@cudy.com
Frequently Asked Questions (FAQ)
Q1: What can I do if the login window does not appear?
A1: If the computer is set to a static IP address, change its settings to
obtain an IP address and DNS server address automatically.
A2: Verify that http://cudy.net/ or 192.168.10.1 is correctly entered in the
web browser .
A3: Use another web browser and try again.
A4: Reboot your router and try again.
A5: Disable and then enable the network adapter being used.
FCC Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
GNU General Public License Notice
The software code in this product was created by third parties and is licensed
under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in
this context refers to the Cudy entity offering respective software for
download or being in charge of the distribution of products that contain
respective code) makes the corresponding GPL source code available upon
request via the official website, either independently or with the assistance
of third parties (such as Shenzhen Cudy Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com.
In addition, Cudy
offers a GPL-Code-Centre under https://www.cudy.com/gplcodecenterdownload
where users can get the GPL
source codes used in Cudy products for free.
Please note, that the GPL-Code-Centre is only provided as a courtesy to Cudy’s
customers but may neither offer a full set of source codes used in all
products nor always provide the latest or actual version of such source codes.
The GPL code used in this product is subject to the copyrights of one or more
authors and is supplied WITHOUT ANY WARRANTY.
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/30/EU,
2014/35/EU, (EU) 2015/863 and 2011/65/EU.
The original EU declaration of conformity can be found at
http://www.cudy.com/ce.