cudy FS1018PS1 Switch, 1 Gbit Uplink Installation Guide

cudy FS1018PS1 Switch, 1 Gbit Uplink

Hardware Connection

Physical Appearance

Front board

Backboard

Specifications

• Model                        FS1018PS1

• Network Protocol     IEEE802.3 / IEEE802.3u / IEEE802.3z
  IEEE802.3x/ IEEE802.3ab / IEEE802.3af/at

• PoE Standard            IEEE802.3at(30W) and IEEE802.3af(15.4w)

• POE Voltage             DC48-55V

• Power Pin                  Power over spare pairs 1/2(+), 3/6 (-)

• AC Input Voltage      AC100~240V

• Output                      52V~2.3A

• Total Power              120W

• Dimension(LxWxH) 320mmx21 0mmx46mm

• Bandwidth                9.2Gbps (non-blocking)

• MAC Address          2K MAC address table

• Packet Buffer Memory  6.8Mpps

• Forwarding Mode      Store-And-Forward

• Working Temperature  -20~50° C

• Storage Temperature  -40~80° C

• Working humidity      Max relative humidity 90%, non-condensing

• Storage humidity        Max relative humidity 95%, non-condensing

• Working hight            Max 10,000 feet (3,000 meters)

• Storage hight             Max 10,000 feet (3,000 meters)

DIP Explanation

LED and Interface Explanation

EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The original EU declaration of conformity may be found at http://www.cudy.com/
Email: support@cudy.com
www.cudy.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>