cudy WE3000 PCIE Wireless Adapter Installation Guide

cudy WE3000 PCIE Wireless Adapter

Specifications

• Model: WE3000, WE3000S, WE4000
• Interface: PCIE X1, USB
• Wireless Standards: Bluetooth
• Support: Win10_64 bit system

Product Usage Instructions

Hardware Installation

1. Turn off your computer, unplug the power cable then remove the case panel.
2. Connect the provided Bluetooth USB cable to the adapter.
3. Locate an available PCIE X1 slot and carefully insert the adapter.
4. Locate an available USB connector and carefully plug the Bluetooth USB cable into it.
5. Connect the antennas to the adapter.
6. Replace the case panel, plug in the power cable and turn on your computer.

Note: If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket.
Note: If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won’t work even after driver installation.
Tip: To maximize performance, make sure the path between the antennas and your router is clear.

Wireless Adapter Driver Installation
This installation method takes the Win10_64 bit system as an example. Please download the driver according to your operating system from the provided address and run the installer to complete the installation.

Bluetooth Driver Installation
Download the Bluetooth driver according to your operating system from the specified address and run the installer to complete the installation.

FAQ

• Q: Where can I find technical support and more information?
  A: For technical support, user guides, and additional information, please visit www.cudy.com/support. You can also reach out via email at support@cudy.com.

• Q: How do I ensure proper connection for optimal performance?
  A: Make sure to follow the hardware installation steps carefully, including connecting antennas and ensuring a clear path between antennas and your router for maximum performance.

Quick Installation Guide

Hardware Installation

1. Turn off your computer, unplug the power cable then remove the case panel.

2. Connect the provided Bluetooth USB cable to the adapter.

3. Locate an available PCIE X1 slot and carefully insert the adapter.
   Note: If the bracket is not suitable for your computer, detach it from the adapter’s board and replace it with the low-profile bracket.

4. Locate an available USB connector and carefully plug the Bluetooth USB cable into it.
   Note: If the Bluetooth USB cable is not correctly connected to the motherboard, Bluetooth function won’t work even after driver installation.

5. Connect the antennas to the adapter.
   WE3000 / WE3000S
   Tip: To maximize performance, make sure the path between the antennas and your router is clear.

6. Replace the case panel, plug in the power cable and turn on your computer.

Wireless Adapter Driver Installation

• This installation method takes the win10_64 bit system as an example.

•  Please download the driver according to your operating system from below address: https://www.cudy.com/ax210

• double-click :

• “WiFi-22.1xx.0-Driver64-Win10-Win11.exe” to run the installer to complete the installation.

• Bluetooth Driver Installation

• Please download the driver according to your operating system from below address: https://www.cudy.com/ax210
  double-click :

• “BT-22.130.0-32-64UWD-Win10-Win11.exe” to run the installer to complete the installation.

Package Content

Support

• For technical support, the user guide and more information, please visit.
• http://www.cudy.com/support
• Email :
  • support@cudy.com
• Driver & manual:
  • https://www.cudy.com/ax210

EU Declaration of Conformity

• Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU, directive 2011/65/EU, directive (EU) 2015/863.
• The original EU declaration of conformity can be found at
• http://www.cudy.com/ce.

NEED TECH HELP?

• Website:
  • www.cudy.com
• Email:
  • support@cudy.com
• Driver & Manual:
  • www.cudy.com/download

Support

• For technical support, the user guide and more information, please visit:
• https://www.cudy.com/support

Hardware Installation

1. Unplug the power cable of your computer and remove the case panel.

2. Connect the Bluetooth USB cable to the adapter.

3. Insert the adapter into a PCI-E X1 or higher slot.

4. Plug the Bluetooth USB cable into a USB connector.
   Note: Skip this step if you don’t have an available USB connector on the motherboard. The Wi-Fi functionality does not require this step.

5. Connect the antennas to the adapter.

6. Mount the case panel back to the computer and boot it up.
   Flip the page to continue…

7. Open a browser and enter https://www.cudy.com/ax210
   Click into the Wi-Fi and Bluetooth icons and click the “Download” buttons in the opened pages.
   Double-click the downloaded files to run and complete the installation.

https://www.cudy.com/ax210 

References

• cudy.com/ce
• Download Center
• AX210-Download
• Cudy Support Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>