Cudy RE1200 Dual Band Range Extender User Manual

Cudy RE1200 Dual Band Range Extender

Specifications

• Model: AP/RE

Package Contents

1. AP/RE
2. Wi-Fi Antennas
3. Ethernet Cable
4. Power Cord
5. PoE Adapter
6. Clamp
7. Screw

Install the Antennas
Grip the base section of the antennas and tighten them securely. Position the antennas at a 45-degree angle for optimal downward Wi-Fi coverage.

Power the Device
Connect the access point to the PoE port of the PoE adapter using the provided Ethernet cable. Power up the PoE Adapter.

Pair the AP/RE
There are multiple methods to pair the AP/RE:

• Method A: Press the WPS/Pair button on your router and also on the Cudy AP/RE until the LED turns solid.
• Method B: Use an additional Ethernet cable to connect the LAN port of the PoE Adapter to a LAN port on the Cudy Mesh device. Wait for the LED to turn solid.
• Method C: Connect your device to the AP/RE’s Wi-Fi network “Cudy-Outdoor”.

Setup Instructions
Follow the instructions provided at http://cudyre.net/ for detailed setup information.

Check System Status via LED
Monitor the system status using the LED indicators for both 2.4 GHz and 5 GHz Wi-Fi networks.

Try the Newly Created Network
The password for the extended network will be the same as the original network by default. Connect to the new Wi-Fi networks created by the device.

FAQ

1. Q: How do I reset the device?
   A: To reset the device, locate the Reset button on the device and press it for 10 seconds until the LED indicators flash.

2. Q: How can I update the firmware of the device?
   A: To update the firmware, visit the Cudy website at http://www.cudy.com/download and follow the instructions provided for firmware updates.

3. Q: What should I do if I encounter connection issues with the device?
   A: If you experience connection problems, try resetting the device and re- pairing it with your network using one of the pairing methods mentioned in the user manual.

Package Content

• a. AP/RE
• b. Wi-Fi Antennas
• c. Ethernet Cable
• d. PoE Adapter
• e. Power Cord
• f. Clamp
• g. Screw

Install the antennas

Grip the base section of the antennas and tighten them.
Note: Position the antennas at a 45-degree angle for optimal downward Wi-Fi coverage.

Power the device

Connect the access point to the PoE port of the PoE adapter via your Ethernet cable. Power up the PoE Adapter.

Pair the AP/RE via method A, B, or C

• Method A – Pressing Buttons:
  Find the WPS/Pair” button on your router, press it and also the WPS button on the Cudy AP/RE, and wait for the LED to turn solid on.

Note: if not successful, please press again or try method B.

• Method B – Plugging Cable:
  (Requires the router to support “Cudy Mesh”) Use an additional Ethernet cable to connect the LAN port of the PoE Adapter to a LAN port on the Cudy Mesh device. Wait for the LED to turn solid on.
  

Note: After set up the AP/RE, you may remove the extra Ethernet cable and the AP/RE will swtich to wireless backhaul automatically.

Method C – Via Config Page:
Connect your device to the AP/RE’s Wi-Fi “Cudy-Outdoor”.

Try the newly created network

By default, the password for the extended network will be the same as the original network.

Note: If you paired the extender with a “Cudy Mesh” device by pressing the WPS buttons, the Wi-Fi name will be the same as the original Wi-Fi.

www.cudy.com
Email: support@cudy.com
Company: Shenzhen Cudy Technology Co., Ltd

Quick Installation Guide

NEED TECH HELP?

Website: www.cudy.com
Email: support@cudy.com

Driver & Manual:
www.cudy.com/download

Support
For technical support, the user guide and more information, please visit: https://www.cudy.com/support

Check the system status via LED

EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directive 2014/53/EU, directive 2011/65/EU, directive (EU) 2015/863. The original EU declaration of conformity can be found at http://www.cudy.com/ce

Mount the device

Quick Installation Guide

1. Install the antennas.

2. Connect the AP/RE to the PoE port of the PoE adapter. Power up the adapter.

3. Pair the AP/RE via method A, B, or C.
   Method A – Pressing Buttons: Press the WPS/Pair buttons on your router and Cudy AP/RE, and wait for the system indicator light to turn solid on.
   Method B – Plugging a Cable: (Requires a Cudy Mesh device as the gateway) Use an extra Ethernet cable to connect the LAN ports on the PoE Adapter and the Cudy Mesh device.
   Note: After the system indicator light to turn solid on, you may remove the extra Ethernet cable and the AP/RE will swtich to wireless backhaul automatically.
   Method C – via Config Page: Connect your device to the AP/RE’s Wi-Fi “Cudy-Outdoor”.
   http://cudyre.net/
   Follow the pictures to set up the AP/RE.

4. Connect to the newly created Wi-Fi, and try accessing internet. By default, the password for the extended network will be the same as the original network.
   Note: If you paired the extender with a Cudy Mesh device by pressing the WPS buttons, the Wi-Fi name will be the same as the original Wi-Fi.

5. Check the system status via LED.
   

6. Mount the device.

References

• Home Page | Cudy
• cudy.com/ce
• Cudy Support Center

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>