Cudy AP01 AX3000 Ceiling Mount Wi-Fi 6 Access Point User Manual
- June 2, 2024
- cudy
Table of Contents
Quick Installation Guide
Power Supply
Method 1: Via Power Adapter
Plug one end of the provided power adapter into the DC POWER port of the AP
and the other end to a standard electrical wall outlet.
Method 2: Via PoE Switch
Connect an Ethernet cable from the PoE switch to the Ethernet port.
Method 3: Via PoE Adapter
Connect an Ethernet cable drom the Ethernet port of the AP device to the PoE
port of the provided PoE adapter.
LED and Button
LED| Off|
---|---|---
Red|
Blue|
Flashing blue|
Yellow|
Flashing yellow|
Red, blue, and yellow alternate|
Reset Button| Red and blue alternate|
Software Configuration
Method 1: Standalone Mode
To configure and manage APs separately.
Choose from the following methods to configure your APs.
Note 1：
- Before you start, be sure to power up and connect your devices according to the topology figure.
- A DHCP server (typically a router with DHCP function enabled) is required to assign IP addresses to the APs and clients in your local network.
Note 2： If the router you use is a Cudy mesh WiFi router(firmware
version:1.15.28 or later), then the access point will auto work as an add-on
mesh unit and share the same WiFi network name and password with the Cudy
router you connect.
-
Connect wirelessly by using the default SSID printed on the bottom label of the product.
-
Launch a web browser and enter http://cudyap.net/ in the address bar. Use admin as log in Password.
http://cudyap.net/ -
Click “Quick Setup”, the window below will pop up, please follow the step-by-step instructions to set up the internet connection.
Enjoy the internet!
Method 2: Controller Mode
Note: Before you start, be sure to power up and connect your devices
according to the topology figure. For Hardware Controller, refer to its
Installation Guide for details.
Hardware Installation
https://www.cudy.com/filedownload/679240
Datasheet
https://www.cudy.com/filedownload/795129
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU), this product must not be disposed of as normal
household waste.
Instead, they should be returned to the place of purchase or taken to a public
collection point for recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more information, please contact your
local authority or the nearest collection point. Improper disposal of this
type of waste may result in penalties according to national regulations.
GNU General Public License Notice
The software code in this product was created by third parties and is licensed
under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in
this context refers to the Cudy entity offering respective software for
download or being in charge of the distribution of products that contain
respective code) makes the corresponding GPL source code available upon
request via the official website, either independently or with the assistance
of third parties (such as Shenzhen Cudy Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com.
In addition, Cudy offers a GPL-Code-Centre under
https://www.cudy.com/gplcodecenterdownload where users can get the GPL
source codes used in Cudy products for free.
Please note, that the GPL-Code-Centre is only provided as a courtesy to Cudy’s
customers but may neither offer a full set of source codes used in all
products nor always provide the latest or actual version of such source codes.
The GPL code used in this product is subject to the copyrights of one or more
authors and is supplied WITHOUT ANY WARRANTY.
FCC Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC and 2011/65/EU.
The original EU declaration of conformity can be found at
http://www.cudy.com/ce.
NEED TECH HELP?
www.cudy.com/qr_vg_ap
www.cudy.com
support@cudy.com
www.cudy.com/download
Documents / Resources
| Cudy
AP01 AX3000 Ceiling Mount Wi-Fi 6 Access
Point
[pdf] User Manual
AP01 AX3000 Ceiling Mount Wi-Fi 6 Access Point, AP01, AX3000 Ceiling Mount Wi-
Fi 6 Access Point, Ceiling Mount Wi-Fi 6 Access Point, Mount Wi-Fi 6 Access
Point, Wi-Fi 6 Access Point, 6 Access Point
---|---