cudy WR1200 AC1200 Dual Band Smart Wi-Fi Router Installation Guide
- June 3, 2024
- cudy
Table of Contents
Quick Installation Guide
WR1200 AC1200 Dual Band Smart Wi-Fi Router
If your internet source is an Ethernet cable coming from the wall directly instead of a DSL/Cable/Satellite modem, connect the Ethernet cable to the router’s WAN port, and skip steps 1, 2 ,3.
Need help?
** Email: support@cudy.com
Driver & Manual: www.cudy.com/download
Connect your computer to the router (Wired or Wireless)
Wired
Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an
Ethernet cable.
Wireless**
Connect your device to the router’s Wi-Fi using the SSID (network name) and
Password printed on the bottom of the router.
7 Launch a web browser, and enter
http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for
password to log in.
8 The window below will pop up, please follow the step-by-step instructions to set up the internet connection.
Button Explanation
| BUTTON | DESCRIPTION |
|---|---|
| RST/WPS | Press and hold for 1 second to enable the WPS function. |
Press and hold this button for about 6 seconds to reset the router to its factory default settings.
More Features
The Cudy router supports various features. You can log into the router’s web management page an http://cudy.net/ to configure these functions. For instructions, please refer to the user guide at http://www.cudy.com
Support
For technical support,the user guide and more information,please visit:
http://www.cudy.com/support
support@cudy.com
EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential
requirements and other relevant provisions of directives 2014/53/EU,
2009/125/EC and 2011/65/EU.
The original EU declaration of conformity can be found at
http://www.cudy.com/ce.
WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment
(WEEE – 2012/19 / EU), this product must not be disposed of as normal
household waste.
Instead, they should be returned to the place of purchase or taken to a public
collection point for recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate
waste handling of this product. For more information, please contact your
local authority or the nearest collection point. Improper disposal of this
type of waste may result in penalties according to national regulations.
FCC Statements:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
GNU General Public License Notice
The software code in this product was created by third parties and is licensed
under the GNU General Public License (“GPL”). If applicable, Cudy (“Cudy” in
this context refers to the Cudy entity offering respective software for
download or being in charge of the distribution of products that contain
respective code) makes the corresponding GPL source code available upon
request via the official website, either independently or with the assistance
of third parties (such as Shenzhen Cudy Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com.
In addition, Cudy offers a GPL-Code-Centre under
https://www.cudy.com/gplcodecenterdownload where
users can get the GPL source codes used in Cudy products for free. Please
note, that the GPL-Code-Centre is only provided as a courtesy to Cudy’s
customers but may neither offer a full set of source codes used in all
products nor always provide the latest or actual version of such source codes.
The GPL code used in this product is subject to the copyrights of one or more
authors and is supplied WITHOUT ANY WARRANTY.