cudy LT700 LTE Router Installation Guide
- June 3, 2024
- cudy
Table of Contents
cudy LT700 LTE Router
Quick Installation
-
Install the cellular antennas
-
With the gold contacts facing down, gently slide the nano SIM card into the SIM1 slot until you hear a click sound.
Note 1:
The router doesn’t support SIM hot-swapping. You need insert or remove the SIM card while the router is powered off, otherwise they may get damaged.
Note 2:
If both SIM1 and SIM2 card slots are inserted with SIM cards, the router will automatically choose which SIM card to use. Since the automatic selection mechanism is time-consuming, it is highly recommended to insert only one SIM card when using for the first time. -
Connect the power adapter to the router.
-
Turn on the router. Waiting 2~5 minutes for it to start.
-
Check the status of the LED
When the LED turns solid blue or purple, it means the router is connected to the cellular network.
If the LED turns to solid red, please follow the instructions of Customize the Router.
Note:
For some ISP’s SIM card (such as Verizon), it may take longer to connect to
the Internet. Please kindly wait another 2~5 minutes.
Customize The Router
-
Connect the router via Ethernet cable or Wi-Fi.
Network name and password is printed on the bottom of the router.
-
Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/) in the address bar, use admin as password to login.
-
The page below would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet.
-
Then please check cellular information card of the status page. If the status is connected, it means the internet connection is successful.
-
If the Internet is not connected, or you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router.
Note：
1, If you are not sure about APN parameters, please contact your internet
provider.
2, If you meet any other problems, don’t hesitate to contact our technical
support team: support@cudy.com
3.Frequently Asked Questions:
https://www.cudy.com/faq
Enjoy the internet!
LED and Button
| N ame | Status | 4G Model | 5G Mo del |
|---|---|---|---|
Off
| Not powered on
Flash
| System startup process or upgrade process
Solid
| System startup is complete
|
Off
| Not powered on
Red
| No internet connection
Purple
| 2G/3G| 2G/3G/4G
Blue
| 4G or WAN connected| 5G or WAN connected
|
Off
| Wi-Fi is disabled
Flash
| WPS pairing
Solid
| Wi-Fi is enabled
|
Off
| Not detect the SIM card
Red
| Not connected to Cellular network
Purple
| Signal is average
Blue
| Signal is strong
LAN LED
|
Off
| No connection
On
| Connected
Button
|
Power
| Press for “Power ON”, bounce for “Power OFF“
WPS
| Press to take effect.
Reset
| Press and hold it for over 2 seconds until all LED lights flashing 3 times to reset the router to default settings.
How to upgrade firmware?
-
Download the latest firmware from https://www.cudy.com/download
-
Unzip the file you download
-
Connect to Cudy’s network via WiFi or Ethernet.
-
Open a web browser and go to http://cudy.net/ or http://192.168.10.1/
-
Log into the web management page.
-
Click Advanced Settings -> Firmware.
-
Choose the firmware you unzipped to upload.
-
Waiting 2～5 minutes for the router to restart.
-
Done
GNU General Public License Notice
The software code in this product was created by third parties and is licensed under the GNU General Public License (“GPL”). If applicable, Cody (“Cody” in this context refers to the Cody entity offering respective software for download or being in charge of the distribution of products that contain respective code) makes the corresponding GPL source code available upon request via the official website, either independently or with the assistance of third parties (such as Shenzhen Cody Technology Co., Ltd.).
For GPL-related questions, email support@cudy.com.
In addition, Cody offers a GPL-Code-Centre under
https://www.cudy.com/gplcodecenterdownload where users can get the GPL
source codes used in Cody products for free. Please note, that the GPL-Code-
Centre is only provided as a courtesy to Cody’s customers but may neither
offer a full set of source codes used in all products nor always provide the
latest or actual version of such source codes.
The GPL code used in this product is subject to the copyrights of one or more
authors and is supplied WITHOUT ANY WARRANTY.
Need help?
Email: support@cudy.com
Driver & Manual: www.cudy.com/download
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>