luminii SR-DMX-SPI Smart Pixel LineLED Decoder Instruction Manual
- June 3, 2024
- luminii
Table of Contents
Installation Instructions – Smart Pixel LineLED Decoder
Models SR-DMX-SPI
SR-DMX-SPI Smart Pixel LineLED Decoder
Please read all instructions prior to installation and keep for future reference!
- ENSURE POWER TO POWER SUPPLY IS OFF BEFORE INSTALLING
- PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
- USE ONLY WITH CLASS 2 POWER UNIT
Prior to installing determine the location, which requires a minimum of 2”
clearance around the decoder to provide proper air circulation.
Remove covers on both sides of Smart Pixel LineLED decoder by using a small
screwdriver. Store covers and their fasteners until decoder setup is complete
and functioning properly and then re-install them.
Please read all instructions prior to installation and keep for future reference!
- ENSURE POWER TO POWER SUPPLY IS OFF BEFORE INSTALLING
- PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
- USE ONLY WITH CLASS 2 POWER UNIT
OPERATING GUIDE
SR-DMX-SPI
DMX512 Pixel Signal Decoder
There are three buttons on the decoder.
| Parameter Setting| | Increase Value| | Decrease Value
---|---|---|---|---|---
After operation, if no action was taken within 30s, the button lock, and backlight of the screen will turn off.
- Long press M button for 5s to unlock the buttons, and the backlight will turn on.
- Long press M button for 5s to switch between test mode and decode mode after unlocked.
During test mode, the first line of LCD will show: TEST MODE. Use test mode to verify RGBW Pixel functionality.
Duirng decoder mode, the first line of LCD shows: DECODER MODE. Use decoder mode when connecting to a Controller and for final installation and customization.
NOTE: When connected to a controller, DMX512 Signal Decoder will stay in
“Decoder Mode”.
The second line of the LCD Display shows the current setting and value. Note:
1 Pixel = 1 Cut Increment
MODE TABLE
SETTING| LCD DISPLAY| VALUE RANGE|
DESCRIPTION
---|---|---|---
Built-in Programs| TEST MODE MODE NO.:| 1-26| See Program Table below
Program Speed| TEST MODE
RUN SPEED:| 0-7| 0: fast, 7: slow
DMX Address| DECODER MODE
DMX ADDRESS:| 1-512| Address of the starting point/Pixel of a program
DMX Signal RGB| DEE)C01:ARBAOSE MX| RGB, BGR, etc.| N/A
Pixel Quantity| DECODER MODE
PIXEL QTY:| 1-170(RGB), 1-128(RGBW)| Number of Pixels to follow a program
IC TYPE| DECODER MODE
IC TYPE:| 2903, 8903,
2904, 8904| 2903: N/A, 2904: for RGBW,
8903: N/A, 8904: N/A
Color| DECODER MODE
COLOR:| MONO, DUAL,
RGB, RGBW| MONO: N/A,
DUAL: N/A,
RGB: N/A,
RGBW: for RGBW
Pixel Merging /
Pixel Size| DECODER MODE
PIXEL MERGE:| 1-100| Number of Pixels to merge together
RGB Sequence| DECODER MODE
LED RGB SEQ:| RGBW,
BGRW etc.| Sequence of RUM, 24 possible combinations
Integral Control| DECODER MODE
ALL CONTROL:| YES, NO| Yes: Merge all Pixels
No: Maintain individual Pixels or Merged Pixels
Reverse Control| DECODER MODE
REV-CONTROL:| YES, NO| Reverse program order
Overall Brightness| DECODER MODE
BRIGHTNESS:| 1-100| 1: dimmest setting 100: brightest setting
NOTE:
The actual maximum control pixels of the controller are 1360 (2903) ,1024
(2904). Please set the pixel and pixel combination value according to the
actual situation, and DO NOT exceed the maximum.
NOTE: For Program Table Change: no fading/dimming between color changes
Fade: fade/dim between color changes Chase: change pixel by pixel Chase with
Trail: change pixel by pixel with fading between
PROGRAM TABLE
PROGRAM NO.| PROGRAM DESCRIPTION| PROGRAM NO.| PROGRAM
DESCRIPTION| PROGRAM NO.| PROGRAM DESCRIPTION
---|---|---|---|---|---
1| Solid color: Red| 10| RGB fading| 19| Red chasing green, chasing blue
2| Solid color: Green| 11| Full color fading| 20| Orange chasing purple,
chasing cyan
3| Solid color: Blue| 12| Red chase with trail
4| Solid color: Yellow| 13| Green chase with trail| 21| Rainbow chase (7
colors)
5| Solid color: Purple| 14| Blue chase with trail| 22| Random twinkle: white
over red
6| Solid color: Cyan| 15| White chase with trail| 23| Random twinkle: white
over green
7| Solid color: White| 16| RGB chase with trail| 24| Random twinkle: white
over blue
8| RGB change| 17| Rainbow chase with trail| 25| White fading
9| Full color change| 18| RGB chasing and fading| 26| Off
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
info@luminii.com
www.luminii.com
Documents / Resources
|
luminii SR-DMX-SPI Smart Pixel LineLED
Decoder
[pdf] Instruction Manual
SR-DMX-SPI Smart Pixel LineLED Decoder, SR-DMX-SPI, Smart Pixel LineLED
Decoder, Pixel LineLED Decoder, LineLED Decoder, Decoder
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>