NEXTIVITY G41-CE 4G LTE Cell Signal Booster Instruction Manual

: July 25, 2024
: NEXTIVITY

Table of Contents

NEXTIVITY G41-CE 4G LTE Cell Signal Booster
Product Usage Instructions
Warranty
FAQs
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

NEXTIVITY G41-CE 4G LTE Cell Signal Booster

Specifications

Model Numbers: G41-CE
Usage: Outdoors

Product Information

Nextivity, Inc. provides a limited warranty for its products. For details, please refer to nextivityinc.com/warranty.
Warning: E911 location information may not be provided or may be inaccurate for calls served by using this device.
Part 90 and Part 20 Signal Boosters: This is a 90.219 Class B device.
Regulatory Information (Canada): CAN ICES-3 (B)/NMB-3. Industrial zone enhancers are NOT consumer devices. They are designed for installation by ISED licensees and qualified installers who have recognized RF training. You MUST be an ISED licensee or have the express consent of an ISED licensee to install or operate this device

Compliance
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Trademark: CEL-FI, IntelliBoost, and the Nextivity logo are trademarks of Nextivity, Inc.

Patents
This product is covered by Nextivity, Inc., US patents and patents pending. Please refer to nextivityinc.com for details.

Contact Information
Compliance Contact: All compliance certificates for this product are available at nextivityinc.com/doc. In the event of a regulatory compliance issue, please get in touch with Nextivity, Inc. directly. Nextivity, Inc can be contacted at nextivityinc.com/contact.

Product Usage Instructions

Installation

Ensure the device is installed outdoors as specified.
Follow the installation guidelines provided in the user manual.
If required, obtain necessary licenses or permissions before installation.

Operation

Power on the device according to the instructions.
Ensure the device is properly connected to the relevant equipment.
Follow any specific operational guidelines provided.

Maintenance

Regularly check for any signs of damage or malfunction.
Clean the device as recommended in the user manual.
Keep the device away from extreme temperatures or environmental conditions that may affect its performance.

CAUTION

Use CEL-FI GO G41 FN indoors. It should not be used outdoors.
The donor antenna(s) MUST be installed to ensure a minimum of 25.5 in (65 cm) separation distance from the human body at all times.
The server antenna(s) MUST be installed to ensure a minimum of 8 in (20 cm) separation distance from persons from the human body at all times.
These products are designed to be used with a direct plug-in power supply unit. When installing the equipment, all the requirements of the manufacturer and the referenced standards must be met.
There are no user-serviceable parts inside.
Changes or modifications to this product not expressly approved by Nextivity may void your right to operate the equipment. There are no user-serviceable parts inside.
Only the antennas listed or approved by the manufacturer can be used with GO G41 FN.
This device may be operated ONLY in a fixed location for in-building use.
Use of unauthorized antennas, cables, and/or coupling devices not conforming with ERP/EIRP and/or indoor-only restrictions is prohibited.

Warranty

Nextivity, Inc. provides a limited warranty for its prod-ucts. For details, please refer to nextivityinc.com/waranty.

Limitation of Liability
In no event shall NEXTIVITY, nor its directors, employees, agents, suppliers, or End Users, be liable under contract, tort, strict liability, negligence or any other legal or equitable theory with respect to the Products or any other subject matter of this Agreement

for any lost profits, cost of procurement of substitute goods or services, or special, indirect, incidental, punitive, or consequential damages of any kind whatsoever or
for any direct damages in excess of (in the aggregate) the fees actually received by NEXTIVITY from the End User with respect to the Products actually purchased and paid for.

WARNING
E911 location information may not be provided or may be inaccurate for calls served by using this device.

Part 90 and Part 20 Signal Boosters THIS IS A 90.219 CLASS B DEVICE

WARNING. This is NOT a CONSUMER device. It is designed for installation by FCC LICENSEES and QUALIFIED INSTALLERS. You MUST have an FCC LICENSE or express consent of an FCC Licensee to operate this device. You MUST register Part 90 Class B signal boosters(as defined in 47 CFR 90.219) online. Unauthorized use may result in significant forfeiture penalties, including penalties in excess of $100,000 for each continuing violation.

Regulatory Information: US FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.

Regulatory Information: Canada
CAN ICES-3 (B)/NMB-3
WARNING : Industrial zone enhancers are NOT consumer devices. They are designed for installation by ISED licensees and qualified installers who have recognized RF training. You MUST be an ISED licensee or have the express consent of an ISED licensee to install or operate this device.

This device MUST ONLY be operated with approved antennas and cables as specified by the manufacturer. The donor and server antenna(s) of this device MUST be installed to always ensure a minimum of 25.5 in (65 cm) and 8 in (20 cm) separation distance from the human body respectively. To reduce oscillations, sufficient separation distance is recommended between the donor and server antennas of the zone enhancer system. You MUST cease operation of this device immediately if requested by ISED or a licensed wireless service provider.

WARNING : E911 location information may not be provided or inaccurate for calls served by this device.

This device complies with Industry Canada license-exempt RSS standard(s).

Operation is subject to the following two conditions:

This device may not cause interference, and
This device must accept any interference, including interference that may cause undesired operation of the device.

Compliance Contact
All compliance certificates for this product are available at nextivityinc.com/doc. In the event of a regulatory compliance issue, please get in touch with Nextivity, Inc. directly. Nextivity, Inc. can be contacted at nextivityinc.com/contact.

Trademark
CEL-FI, IntelliBoost, and the Nextivity logo are trademarks of Nextivity, Inc.

Patents
This product is covered by Nextivity, Inc., US patents and patents pending. Please refer to nextivityinc.com for details.

Copyright
Copyright © 2023 by Nextivity, Inc. All rights reserved. Reproduction or media conversion by any means is protected by copyright and may only occur with the prior written permission of Nextivity. Designed by Nextivity in California.

U.S. Headquarters: Nextivity, Inc.

16550 West Bernardo Drive, Bldg. 5, Suite 550 San Diego, CA 92127, USA
Phone : +1 858.485.9442
www.cel-fi.com

Nextivity UK Ltd
Unit 9, Basepoint Business Centre Rivermead Drive, Westlea Swindon SN5 7EX

Nextivity Singapore Pte. Ltd.
2 Changi Business Park Avenue 1, Level 2 – Suite 16, 486015 Singapore

Bureau in Europe Union
Carrer Bassols 15-1, Barcelona 08026, Spain

FAQs

Q: Is this device suitable for indoor use?
A: No, this device is specifically designed for outdoor use as indicated in the specifications.

Q: Do I need any special licenses to operate this device?
A: Yes, you must have the necessary FCC license or consent to operate this device legally.

Q: How can I obtain warranty service for this product?
A: For warranty service, please refer to nextivityinc.com/warranty or contact Nextivity, Inc. directly.