cudy LT15 4G LTE Router Installation Guide

June 3, 2024
cudy

Quick Installation Guide

Package Content

1x 4G LTE Router
1 x Power Adapter
1 x Quick Installation Guide
1 x Ethernet Cable

  1. Install the cellular antennas.cudy LT15 4G LTE Router - FIGURE 1

  2. Insert the Nano SIM card into the SIM1 slot until you hear a click.
    SIM card requirementcudy LT15 4G LTE Router - FIGURE
2 Direction: With the gold contacts facing down, gently slide the SIM card into the slot.
    Note:
    If both SIM1 and SIM2 card slots are inserted with SIM cards, the router will automatically choose which SIM card to use. Since this automatic selection mechanism is time-consuming, it is strongly recommended that only one card is inserted for the first use.

  3. Connect the power adapter to the router.cudy LT15 4G LTE Router - FIGURE 3

  4. Turn on the router. Waiting 2~5 minutes for it to start.

  5. Check the status of the LED.
    If the LED turns to solid blue, means connect to cellular network and signal is strong.
    If the LED turns to solid purple, means connect to cellular network and signal is average.
    If the LED turns to solid red, please follow the instructions of Customize the 4G Router.

Note:
For some ISP’s SIM card(such as verizon), it may takes longer to connect to the internet. Please kindly wait another 2~5 minutes.

Customize The 4G Router

  1. Connect the router via ethernet cable or Wi – Fi. Network name and password is printed on the bottom of the router.cudy LT15 4G LTE Router - FIGURE 4
  2. Launch a web browser and enter http://cudy.net/ (or http://192.168.10.1/ ) in the address bar, use admin as password to login.cudy LT15 4G LTE Router - FIGURE 5
  3. Below page would pop up if your SIM card needs PIN to unlock. Please enter your PIN and click Save & Apply, then wait 15 seconds to connect to the Internet.cudy LT15 4G LTE Router - FIGURE 6
  4. Then please check 4G information card of the status page. If the status is connected, means connected to the internet successfully. cudy LT15 4G LTE Router - FIGURE 7
  5. If 4G is not connected, or if you want to customize the router yourself, click “Quick Setup” and follow the step-by-step instructions to configure the router.cudy LT15 4G LTE Router - FIGURE 8

Note:

  1. If you are not sure about APN parameters, please contact your internet provider.
  2. If you meet any other problems, don’t hesitate to contact our technical support team: support@cudy.com
  3. Frequently Asked Questions: Find answers on https://www.cudy.com/faq

Enjoy the internet!

LED and Button

Name Status Indication
**** Off Not powered on
Flash System startup process or upgrade process
Solid System startup is complete
Off Not powered on
Red No Internet connection
Purple 2G/3G connected
Blue 4G connected
Off Wi-Fi is disabled
Flash WPS pairing
Solid Wi-Fi is enabled
Off Not detect the SIM card
Red Not connected to 4G network
Purple 4G LTE signal is average
Blue 4G LTE signal is strong
LAN LED Off No connection
On Connected
Button Power Press for “Power ON”, bounce for “Power OFF”
WPS Press to take effect.
Reset Long press for 2s to take effect without releasing it. When it takes

effect, all LED lights flash 3 times, and then enter the restart process.

How to upgrade firmware?

How to upgrade firmware?

  1. Download the latest firmware from https://www.cudy.com/download
  2. Unzip the file you download
  3. Connect to Cudy’s network via WiFi or Ethernet.
  4. Open a web browser and go to http://cudy.net/ or http://192.168.10.1/
  5. log in the web management page.
  6. Click Advanced Settings – > Firmware.cudy LT15 4G LTE Router - FIGURE 9
  7. Choose the firmware you unzipped to upload.cudy LT15 4G LTE Router - FIGURE 10
  8. Waiting 2~5 minutes for the router restart.
  9. Done

Need Help?
Q1. What should I do if I cannot access the web management page?
– A1: If the computer is set t o a static IP address, change its settings t o obtain an Iaddress automatically.
– A2: Make sure http://cudy.net/ or http://192.168.10.1/ is correctly entered in the web browser.
– A3: Use another web browser and try again.
– A4: Reboot your router and try again.
– A5: Disable and enable the active network adapter in use.
Q2. How do I restore the router to its factory default settings?
– A1: With the router powered on, press and hold the RESET button for 6 seconds before release. Wait the router resets.
– A2: Log in to the web management page of the router, and go to Advanced Settings >Reset , click Perform Reset and wait until the reset process is complete.
Q3: What can i do if i meet other problems?
– A1: Find answers on https://Awww.cudy.com/faq
– A2: Contact cudy technical support team via email: support@cudy.com
– A3: Contact cudy technical support team via Skype: support@cudy.com

EU Declaration of Conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.cudy.com/ce.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and u s e d in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will  not occur ina particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and r eceiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RE Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Email:support@cudy.com
Skype:support@cudy.com 
Website:www.cudy.com
Download:www.cudy.com/download
www.cudy.com
Support@cudy.com
Company: Shenzhen Cudy Technology Co., Ltd

Documents / Resources

| cudy LT15 4G LTE Router [pdf] Installation Guide
LT15 4G LTE Router, LT15, 4G LTE Router, LTE Router, Router
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals