cudy M1200 AC1200 Dual Band Whole Home WiFi Mesh System Installation Guide

cudy M1200 AC1200 Dual Band Whole Home WiFi Mesh System

Before You Begin

Do you already have a Cuddy Mesh router working as Main Mesh in your network?
YES:

1. Please follow the instructions of Add More Mesh Units to add the Cudy mesh unit to the network.

NO:

1. Please follow the instructions of Setup The Main Mesh to install the main mesh unit to create your Cudy network.
2. Then please follow the instructions of Add More Mesh Units to add the rest of the Cudy mesh unit

Setup The Main Mesh

If your internet source is through an Ethernet cable coming from the wall instead of through a DSL/- Cable/Satellite modem, connect the Ethernet cable to the router’s Port #1, and skip steps 1, 2 ,3.

1. Power off your modem.

2. Connect Port #1 of Cudy to your modem’s LAN port.

3. Power on the modem and wait about 2 minutes for it to restart.

4. Power on Cudy and wait about 1 minute until the system LED is solid on(red or white).

5. Connect your computer to the router (Wired or Wireless) Wired
   Turn off the Wi-Fi on your computer and connect it to the router’s Port #2 via an Ethernet cable.
   Wireless
   Connect your computer to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.

6. Launch a web browser, and enter http://cudy.net/ in the address bar. The login password is admin. Note: If the login window does not appear, please refer to FAQ > Q1.

7. Then the pop-up window below will appear, please follow step-by-step instructions to set up the internet connections.
   When all the configurations are completed, the router will restart. Wait the LED turn to solid white, which means the Main Mesh has configured successfully and connects to the internet. Note: If the pop-up window does not appear, please click Quick Setup on the status page.

Add More Mesh Units

1. Power on the add-on mesh unit, and waiting its system LED becomes solid on.
2. Within 2 minutes, press the Pair button on both of the add-on mesh unit and the main mesh(the one you already configured).
3. When the system LED on the add-on unit be-comes solid white, it means the configuration is succeed.

Note : For other LED status, please check the LED explanation. Or you can contact our support team support@cudy.com

LED Explanation

Button Explanation

EU Declaration of Conformity

• Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives
• 2014/53/EU, 2009/125/EC and 2011/65/EU.
• The original EU declaration of conformity can be found at
• http://www.cudy.com/ce.

FCC Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

WERE

According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste. Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.

References

• cudy.com/ce
• Download Center

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>