aspire Vilter Pro Kit Sticky Fingers User Manual

June 3, 2024
aspire

aspire Vilter Pro Kit Sticky Fingers

SAFETY INFORMATION

For a safe and effective use of this product and its accessories, we advise you to read the following instructions  and to strictly observe the operating procedures indicated in this manual and refer to the leaflet contained in the packaging of the individual products/accessories. After reading, store it in a safe place for future reference Incorrect handling of this product could possibly result In personal Injury or physical damage The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in this manual.
This product is intended for adult smokers. This product is not recommended for non-smokers, young peoples under the legal age, pregnant or breast feeding women and those experiencing general ill health
Keep the product and its accessories out of reach of children and minors at all times!

COMPONENTS OF THE PRODUCT

This product is a high-tech product arid Its components such as the battery, the USB cable, and the tank/pod part have been specifically made for this product. We recommend the exclusive use of components and accessories indicated. Use of components and I or accessories not specifically produced for t his device may lead to a malfunction and I or damage to the product and to the cancellation of the warranty.

WARNINGS BEFORE USE

The use of an empty, dry or drained tank/pod can cause immediate damage to the internal resistance and the consequent cancellation of the warranty.

GENERAL WARNINGS AND LIMITATIONS OF USE

Do not bring your vape device Into contact with water or other e-liquid. Avoid exposing the device to too low or too high temperatures (-5° CI 50°C) Avoid using the product ,n overheated or excessively damp environments Keep the product and its accessories away from heat sources Use only Aspire original spare parts and accessories Always discharge the battery completely before recharging. Carefully read the composition of the e-liquid before use, and do not I.IS9 the product If you are allergic to any of the components of the a-liquid Do not use the product if you suffer from respiratory or cardiovascular system disorders. Do not use the product during pregnancy or lactation
Do not ingest or swallow any part of the product or its accessories and do not try to open or tamper with the components of the product or Its accessories The device does not need any flame to light it. To avoId
performance losses. disconnect the battery from the USB charger when fully recharged, and In the case of anomalies, smell of burnt or abnormal deformation of one of the components of the device or its accessories, stop using it immediately and contact Customer Care.
Avoid direct contact of the e-liquid with the mouth which could happen if you inhale too strong and too frequently or if the tank is too full.
Avoid any unauthorized operations that may damage the product. For an optimal performance of your vape device. It would be advisable to spend at least 30 seconds between one inhalation and the next. We recommend only to use the certified charger supplied to charge this device and not attempt to recharge the device with any other type of charger. We don’t recommend using the product while charging.
Do not discard this product in the environment, and dispose of the product components at dedicated collection/disposal points.

Contents

  •  1 Vilter Pro Power Bank
  • 1 Vilter Pro Device
  • l Vilter Pro Pod
  • 3 Filter Drip Tip
  • l Type-C Cable
  • l User Manual

Component Views (Vilter Pro)

aspire Vilter Pro Kit Sticky Fingers fig 1

Component Views (Vilter Pro Power Bank)

Vilter Pro Parameters

  • Dimensions (Including filter drip tip): Φ15*132.2 mm
  • Pod capacity 2.0 ml
  • Coll parameter, 1.2Ω mesh coll, Kanthal AF
  • Coil non-replaceable
  • Auto-draw
  • Easy side fill
  • Battery capacity: 420 mAh
  • 3.4V constant output
  • Maximum Vaping time: 6s
  • Magnetic charging: 5V, 0.5A

Power Bank Parameters

  • Dimensions: 30.321.2110 mm
  • Capacity: 1600 mAh
  • Charging for power bank: Type-C 5V, 2A
  • Magnetic charging for device: 1A

Pod Filling

  • Let the pod stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use
  • Do not let the pod be completely empty. Refill the pod to avoid dry burning or damage to the coil.
  • Please remember that this device can be draw activated . In order not to damage the coil or to bum the cotton, do not inhale from the drip tip before filling the pod.

How to charge your device (Two ways of charging)

Battery Level Indicator (device and power bank)

  • Green 60- 100% 3.8V- 4.2V
  • Blue 30-60% 3.5V-3.8V
  • Red 0-30% <3.5V

LED Flash Indicator (device)

  • Green 20 times Fully charged
  • Green 3 times Disconnect the power bank
  • Red 3 times Connect the power bank

LED Flash Indicator (power bank)

  • Green 5times Fully charged
  • Green 3times Turn on (quickly press the power button 5 times)
  • Red 3 times Turn off ((quickly press the power button 5 times)
  • Red/blue/green flashes: In Charging
  • Red/blue/green flashes 10s: Connect the device
  • Red/blue/green flashes 5 times: Device was fully charged or disconnected
  • Red/blue/green stays 3s: Press the power button

Notes

  1. The LED light of power bank flashes red/blue/green as per current battery level.
  2. You can charge your device and your power bank at the same time.

Auto-draw Protection

Protection Features (device and power bank)

  • Over-Time Protection (6s)

    • Red and blue LED flashes 10 times device stop firing (device)
  • Short Circuit Protection

    • Red and blue LED flashes 3 times (device and power bank)
  • Over Discharge Protection

    • Red LED flashes 15 times-(device).
    • Red LED flashes 10 times(power bank).
  • Over charge Protection

    • The device/power bank will stop charging.
  • Over heat Protection

    • The LED light will stay yellow for 3s and then the device will cut off  and stop firing -(device).
  • Over voltage Protection

    • When charging is normal, the device will stop charging and vaping is not allowed -(device).
    • The LED light will flash red 3 times when you plug in the Type-C cable-(power bank).

IMPORTANT INFORMATION ABOUT USING NICOTINE CONTAINING E-LIQUIDS

Before using nicotine containing e-liquid the user should read the following information carefully.

NICOTINE CONTAINING E-LIQUID

Do not use If you are allergic to nicotine or any of the other ingredients contained within the e-liquid {see manufacturer’s label for full details)

WARNINGS AND PRECAIJTION8

Nicotine containing e-liquid are not recommended for

  • Non-smokers

  • Young people under the legal age:

  • Pregnant or breast-feeding women; as nicotine is known to cross the placenta and to be excreted in breast milk

  • Those experiencing general ill health: such as heart disease, stomach and duodenal ulcers, liver or kidney problems long term throat disease or difficulty breathing due to bronchitis, emphysema or asthma;

  • Those who have an overactive thyroid gland or have a pheochromocytoma (a tumor of the adrenal gland
    that can affect high blood pressure)

  • Those who have diabetes, as nicotine may affect your blood sugar levels

  • Those taking the following medication;

  • Theophylline (to treat breathing problems)

  • Ropinirole (to treat restless leg syndrome)

  • Clozapine (to treat schizophrenia)

POSSIBLE SIDE EFFECTS

If you inhale too much nicotine or use the product too much you may experience one or more of the following effects

  • Feeling faint:
  • Nausea (Feeling sick)
  • Headache
  • Coughing
  • Irritation of the mouth or throat
  • Dizziness
  • stomach discomfort
  • Hiccups
  • Nasal congestion
  • Vomiting (being sick)
  • Heart palpitations
  • Abnormal heart rate

If you experience any of these side effects; Including any possible side effects not listed in this leaflet discontinue using the product. If the effect(s) continue after you stop use, consult your doctor or healthcare professional bring this leaflet to their attention

WARRANTY

Please visit our official website below to know our warranty policy and find an official after -sale support center in your country https://www.aspiracig.com/service/ If your region doesn’ t have a support center, you
can contact the retailer for service as normal.

Important Information
When requesting for warranty claims, kindly provide receipts or Invoice purchased from vendor Please also keep the original box containing the serial number and security cede, or batch code for verification

For detailed operating instructions, please visit
Manuel: http://www.aspirecig.com/downloads/manuals/
Video: https://www.youtube.com/c/Aspirecigs

Shenzhen Elgate Technology Co. LTD.
Floor 1-4, Building 3, No.14 Jian’an Road, Shajing
Sub-district. Bao an District, Shenzhen,
Guangdong Province, China
Tel, +86-755-81499783
Email: service@aspirecig.com
www.aspirecig.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals