cudy WR1200 Dual Band Smart WiFi Router Installation Guide

June 3, 2024
cudy

cudy WR1200 Dual Band Smart WiFi Router

If your internet connection is through an ethernet cable directly from the wall instead of through a DSL/Cable/Satellite modem, connect the ethernet cable to the router’s WAN port, and skip steps 1, and 2,3.

HOW CAN IT USE

cudy-WR1200-Dual-Band-Smart-WiF--Router-FIG1

  1. Turn off the modem, and remove the battery if it has one.

  2. Connect the router’s WAN Port to DSL/Cable Modem/Ethernet

  3. Turn on the modem and then wait about 2 minutes for it to restart.

  4. Connect the power adapter to the router.

  5. Verify the following LEDs to confirm the hardware is connected correctly.

  6. Connect your computer to the router (Wired or Wireless)

    • Wired
      Turn off the Wi-Fi on your computer and connect it to router’s LAN port via an ethernet cable.

    • Wireless
      Connect your device to the router’s Wi-Fi using the SSID (network name) and Password printed on the bottom of the router.

  7. Launch a web browser, and enter http://cudy.net/ or http://192.168.10.1/ in the address bar. Use admin for a password to log in. Note: If the login window does not appear, please refer to FAQ > Q1.

  8. Then below window will pop up, please follow the step-by-step instructions to set up the internet connection.

Button Explanation

More Features

The Cudy router supports various features. You can log in to the router’s web management page at http://cudy.net/ to configure these functions. For instructions, please refer to the user guide at http://www.cudy.com

Support

For technical support,the user guide and more information,please visit: http://www.cudy.com/support support@cudy.com

Frequently Asked Questions (FAQ)

Q1: What can I do if the login window does not appear?

  • A1: If the computer is set to a static IP address, change its settings to obtain an IP address and DNS server address automatically.
  • A2: Verify that http://cudy.net/ or 192.168.10.1 is correctly entered in the web browser .
  • A3: Use another web browser and try again.
  • A4: Reboot your router and try again.
  • A5: Disable and then enable the network adapter being used.

Q2: What should I do if i can not find Wi-Fi signal?

  • A: Please make sure the router is connected, power and broadband interface has no loose. If everything is normal but still no signal, please try to use a computer to set, or restore the router to factory settings. If after restoring factory settings but still no signal, you can restart the router, if it still doesn’t work, maybe the router has fault.

Q3: How to Reset to factory defaults?

  • A: While the power is still on, keep pressing the RST/WPS button for 6 seconds, and wait for 1-2 minutes and it will restore to factory settings.

Q4: Why can’t my phone enter the Setting Page of the Router?

  • A: Please make sure your phone is connected to the Cuddy Router Wi-Fi(the default name is printed on the bottom of the router), and make sure you enter the right site in the browser. (Please follow instructions FAQ -> Q1)

Q5: Why can’t I enter the Setting Page after restarting the Router?

  • A: After restarting the Router, maybe your phone connects automatically to other Wi-Fi, please make sure your phone is connected to Cudy Router Wi-Fi. (default name is printed on the bottom of the router)

Declaration of Conformity

Cudy hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC and 2011/65/EU. The original EU declaration of conformity can be found at http://www.cudy.com/ce.

FCC Statements

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation

WEEE
According to the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU), this product must not be disposed of as normal household waste. Instead, they should be returned to the place of purchase or taken to a public collection point for recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more information, please contact your local authority or the nearest collection point. Improper disposal of this type of waste may result in penalties according to national regulations.

Need help?

Email:
support@cudy.com

Driver & Manual:
www.cudy.com/download

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals