urmet H.265 IP Camera User Guide
- June 3, 2024
- urmet
Table of Contents
urmet H.265 IP Camera
General information
Dear Customer,
Thank you for purchasing this product.
- This quick start guide was written to help you set up H.265 IP Camera Series rapidly and easily.
- Read this quick start guide which contains information for correct, safe use carefully before using the device.
- Keep this guide at hand so that you can refer to it when needed.
NOTE
For more detailed information about the devices, refer to the complete user
manual available on the Urmet website (see QR code printed on the Addendum
sheet).
Electricity
Before connecting to electrical outlet, verify the electrical specifications
of the device are suitable for the available power source.
We suggest to connect the device to electrical outlet via a switch
disconnector. In case of malfunctioning, disconnect electrical power from the
general switch. Use only the provided power supply.
Safety precautions
- Do not expose the device to rain or humidity and do not insert any solid or liquid object in it to prevent the risk of fire or electrocution. In these events disconnect the device from the electrical outlet and call technical assistance to check it.
- Do not open the device. Any repair must be made by qualified personnel or by calling the nearest authorized technical assistance center (www.urmet.com >> Contacts).
- Keep the device away from children to prevent any, even involuntary, damaging. Do not touch the device with wet hands as it might cause electrical shock or mechanical damages.
- If the device falls down while working or if the salesbox is damaged, do not continue using it. If usage is continued under such circumstances electrical shocks might take place. Contact the authorized retailer or installer.
Installation precautions
- Do not install the camera in places with possible exposure to rain or humidity without the proper protective case.
- Do not point the camera directly to sunlight or other intense sources of light, even when turned off. The subject of recording must not be against the light.
- Do not point the camera against reflective objects.
- Some light conditions (such as fluorescent color) can affect the recorded colors. Use AUTO-IRIS (where available) lens when operating the camera in changing light environments.
- Do not use this device on any unstable support such as lurching or sloping table to prevent the device from falling and be damaged.
- If water or any other material should penetrate the camera, stop using it as it might cause fire or electrical shock and contact the authorized retailer or installer.
- Do not cover the device with any cloth while using to prevent deformation of the external part and inner components heating which might provoke fire, electrical shock or mechanical damages.
- Do not put magnets or magnetized objects close to the device to prevent functional anomalies.
- Do not use this device in presence of smoke, steam, humidity, dust or intense vibrations. Do not use the device shortly after moving it from warm to cold environment and vice versa. After moving the device wait three hours before using it: this time is necessary for the device to adapt to the new environment (temperature, humidity, etc.).
Usage precautions
- Check the device is not damaged after removing the packaging.
- Check the working environment is not too humid and the temperature is within the indicated range.
- Do not point the camera against sunlight to prevent sensor damages.
Device cleaning
- Use a dry cloth to remove dust and dirt from the device.
- If dirt cannot be removed with a dry cloth, use a humid cloth and a neutral cleanser.
- Do not use spray cleanser for device cleaning. Do not use volatile liquids such as gasoline, alcohol, solvents etc. or chemical treated cloth to clean the device to prevent deformations, damages or scars on the finishing paint.
- Disconnect the device from the electrical outlet before cleaning.
INSTALLATION INSTRUCTION
Waterproof accessories
Waterproof lock installation instruction
Video recording
- This device is not designed as a burglar system but mainly to transmit and record video images. URMET S.p.A. is not in any way responsible for loss or damages of the user consequent to theft.
- Before using the device, record a demo video to verify the correct functionality of this feature. URMET S.p.A. is not in any way responsible for loss of recorded data consequent to wrong setting or usage, device malfunctioning or failure.
- This device is composed by electronic precision components. Do not hit the device while recording as it might affect the video.
Privacy and Copyright
- The IP camera is designed for surveillance systems. Video recording is subject to the laws applicable to the Country where used. It is forbidden to record images with Copyright. The User is responsible to check and respect all local laws and norms for video signal recording. The manufacturer is
- NOT in any way liable for any usage of the product which might result not compliant to the relevant norms.
- Firmware upgrade
- Contact Customer Service Technical Assistance URMET S.p.a. in order to check availability of firmware upgrades.
Network configuration
- The camera is set with static IP address 192.168.1.2.
- By opening the web page of the device from Internet Explorer, you will be asked to change the password which by default is “admin” (login user “admin”). It is recommended that you always customize your password. In case of use with NVR, change the password before adding the camera to the NVR.
- In order to detect the device on the network and perform the basic configurations, use the SearchConfig Tool V2.0 software available for download on the website www.urmet.com in the product page under the DOCUMENTATION AND RESOURCES
CORRECT DISPOSAL OF THIS PRODUCT
- DIRECTIVE 2012/19/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 4 July 2012 on waste electrical and electronic equipment (WEEE)The symbol of the crossed-out wheeled bin on the product or on its packaging indicates that this product must not be disposed of with your other household waste.
- Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.
- The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
- For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product
Customer Care
Italia : 011 23 39 810
Export Dept.: +39 011 24 00 250/256
URMET S.p.A.
Via Bologna, 188/C | 10154 Torino (ITALY)
www.urmet.com
info@urmet.com
IF YOU LOVE YOUR BUILDING
References
- BfDI - Startseite
- BfDI - Startseite
- Startseite | Grothe
- Startseite | Grothe
- Professional Video Door Phone and Intrusion Alarm Systems | Urmet SpA
- Professional Video Door Phone and Intrusion Alarm Systems | Urmet SpA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>